Sharif Digital Repository

A heterogeneous nanocatalyst was prepared via covalent anchoring of dioxomolybdenum(VI) Schiff base complex on core-shell structured Fe3O4@SiO2. The properties and the nature of the surface-fixed complex have been identified by a series of characterization techniques such as SEM, EDX, XRD, TGA, FT-IR, and VSM. The synthesized hybrid material was an efficient nanocatalyst for selective oxidation of olefins to corresponding epoxides with t-BuOOH in high yields and selectivity. The catalyst could be conveniently recovered by applying an external magnetic field and reused several times without significant loss of efficiency. © 2016 Taylor and Francis  

Magnetic nanoparticles of CuFe2O4 were applied as catalyst system for one-pot thiophosphate synthesis via the reaction of aryl sulfonyl chlorides with H-phosphonates under conventional heating conditions. This is an extremely efficient and green method for thiophosphate synthesis under base- and solvent-free conditions. Various thiophosphates were obtained in good to excellent yields under the optimized reaction conditions in a short time. The catalyst can be easily recycled from the reaction by an external magnetic field and reused for the next run. In this study, TD-DFT B3LYP/6-31 + G(d) calculations are in good accord with the experimental results. A comparison between experimental and... 

Abstract: Au nanoparticles supported on cerium oxide/graphitic carbon nitride (CeO2@g-C3N4) was synthesized and used as heterogeneous catalyst in redox reaction. The catalyst was characterized by different techniques such as FT-IR, XRD, FE-SEM, EDS, TEM, BET, TGA, and ICP. The as-prepared ternary nanocomposite was used as an effective catalyst for the reduction of toxic 4-nitrophenol to useful 4-aminophenol by NaBH4. The rate constant value of reduction reaction reached up to 0.106 s−1 by Au/CeO2@g-C3N4, which was 3.8, and 8.8 times higher than that of Au@CeO2 (0.028 s−1), and Au@g-C3N4 (0.012 s−1) nanocomposites, respectively. The superior catalytic performance of as-prepared catalyst in... 

A new complex of copper (II) was synthesized through the reaction of a Schiff-base, 4-(((2-hydroxyethyl)imino)methyl)phenol, with CuCl2·2H2O and, then, immobilization on SBA-15 support. Both immobilized and free copper complexes were characterized using different techniques such as FT-IR, elemental analysis (CHN), SEM, XRD and TEM, and were utilized as catalysts in one-pot azide-alkyne cycloaddition (AAC) reaction. Both catalysts showed high activity in conversion of various substrates to corresponding triazole compounds. The reaction was performed in water under mild condition and without any extra additives. The prepared catalyst was recovered and reused in 5 runs without any significant... 

Abstract: Polyoxometalate-functionalized magnetic nanoparticles (Fe3O4@SiO2–MnPOW) were successfully synthesized via covalent anchoring of Mn(II)-substituted phosphotungstate on ammonium-modified Fe3O4@SiO2 nanoparticles. The complete characterization of nanoparticles has been carried out by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, Fourier transform infrared and elemental analysis. The resulting nanocomposites were efficient catalysts for the selective oxidation of sulfides with different green oxidants in good to excellent yields and also high selectivity. Leaching and recycling tests showed that the nanocatalyst can be reused several times without... 

VO2(picolinichydrazone) complex as a catalyst was stabilized on a SBA-15 mesoporous silica as a catalytic support by using (3-chloropropyl)triethoxysilane as a connector. SBA-15 is nanoporous and has a high ratio of surface area to volume. The immobilization of a metal–Schiff base complex to the surface area of SBA-15 can improve its catalytic effects by increasing the catalytic surface area. Unlike homogeneous catalysts, heterogeneous catalysts can be recovered and reused several times without any significant loss of catalytic activity. A vanadium–Schiff base complex-functionalized SBA-15 was synthesized by covalency connected by a pre-synthesised VO2(picolinichydrazone) complex to... 

Abstract: In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis by a heterogeneous catalyst. The magnetic polyacrylonitrile was synthesized through anchoring acrylonitrile monomers on Fe3O4 nanoparticles surface and then modified with 2-aminopyridine. At the final step, copper nanoparticles were immobilized onto the polymeric support containing stable ligands from functionalized nitrile groups of polyacrylonitrile. The different techniques such as Fourier transmission infrared spectroscopy, X-ray diffraction, Field emission scanning electron microscopy, Transmission... 

The reaction of the functionalized mesoporous SBA-15 in absolute ethanol with copper (II) acetate afforded a novel CuII-Schiff base/SBA-15 catalyst. The compound CuII-Schiff base/SBA-15 was characterized by IR spectroscopy, small-angle X-ray diffraction (SAX), Energy Dispersive X-ray Spectroscopy (EDXS), X-ray Absorption Near Edge Structure (XANES), Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), and N2 adsorption/desorption studies. Further, the catalytic activity of this well-defined material was tested in three-component Copper-catalyzed Azide-Alkyne Cycloaddition (CuAAC) reactions to obtain 1,4-disubstituted-1,2,3-triazoles in good to excellent yields from an... 

An improved and efficient method for the synthesis of 1- & 5-substituted 1Htetrazole derivatives was described in the presence of nano-ordered MCM-41-SO3H as an effective heterogeneous catalyst. This metal-free protocol, [2 + 3] cycloaddition of sodium azide to various nitriles or ethyl N-phenyl formimidate intermediate under mild reaction conditions, provides a wide range of 1H-tetrazoles in good to excellent yields. The catalyst was reused five times without significant loss of catalytic activity. © 2019 Sharif University of Technology. All rights reserved  

An improved and efficient method for the synthesis of 1- & 5-substituted 1Htetrazole derivatives was described in the presence of nano-ordered MCM-41-SO3H as an effective heterogeneous catalyst. This metal-free protocol, [2 + 3] cycloaddition of sodium azide to various nitriles or ethyl N-phenyl formimidate intermediate under mild reaction conditions, provides a wide range of 1H-tetrazoles in good to excellent yields. The catalyst was reused five times without significant loss of catalytic activity. © 2019 Sharif University of Technology. All rights reserved  

In this research, a solid 1%Li/Ca-La mixed oxide catalyst was prepared using co-precipitation method followed by wet impregnation. The prepared catalyst was used in the transesterification reaction of canola oil and methanol for biodiesel synthesis. The effects of calcination and reaction temperatures were investigated on the activity of the catalyst. In addition, rate of the reaction was studied through a kinetic model for which parameters were determined. Surface properties and structure of the catalyst were characterized through the powder X-ray diffraction (XRD), thermogravimetry/derivative thermogravimetry (TG/DTG), and Fourier transform infrared spectroscopy analysis. All these... 

Silver (0) nanoparticles supported on silica-coated ferrite were synthesized to be used as an efficient and recyclable heterogeneous catalyst for oxidant-free dehydrogenation of alcohols to the corresponding carbonyl compounds. The catalyst can be easily recovered and reused for 8 reaction cycles without considerable loss of activity. The facile recovery of the catalyst is carried out by applying an external magnetic device. The catalyst was fully characterized by the techniques of TEM, SEM, XRD, EDS, ICP-AES, and VSM. This journal is  

A novel heterogeneous copper catalyst was synthesized in which poly(1-vinyl imidazole-co-ionic liquid) was used as a solid heterogeneous support. The catalyst was readily synthesized in a large scale amount. The catalyst has a high loading level of copper ions and can be used in low weight percentages. The resulting catalyst was highly active in the preparation of triazoles by the Huisgen 1,3-dipolar cycloaddition method. In some cases the catalytic turnover number and frequency reached 70 002 and 3889 h-1, respectively. The catalyst was recycled many times without significant loss of activity. This journal is  

A new magnetic heterogeneous copper catalyst was prepared by immobilization of copper ions onto a cross-linked polymeric nanocomposite composed of starch grafted polyacrylamide and functionalized Fe3O4 magnetic nanoparticles. The resulting support was loaded with large amounts of copper ions (1.6 mmol g-1). The prepared catalyst is highly active in Huisgen 1,3-dipolar cycloaddition reactions of different azides and alkynes at low catalyst amounts. Various corresponding 1,2,3-triazoles were produced with high yields in mild conditions. The catalyst was easily recovered and reused for ten cycles of reaction and no significant loss of catalytic activity was observed  

A heterogeneous tungstate-based catalyst has been prepared for selective oxidation of sulfides to sulfoxides in the presence of 30% H2O2. The catalyst was prepared via immobilization of high amounts of WO4 2− onto the cross-linked poly(ammonium ethyl acrylamide) coated magnetic nanoparticles (MNP). FT-IR, TEM, TGA, VSM, XRD, EDX, and CHN analysis were used for characterization of catalyst. Variety of sulfides successfully converted to the related sulfoxides using 1 mol% of catalyst at room temperature in high yields. The catalyst was easily recovered and reused up to 6 times without loss of activity  

Copper supported on polymer-coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy-dispersive X-ray spectroscopies, scanning and transmission electron microscopies, X-ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4-disubstituted... 

Palladium nanoparticles immobilized on the magnetic nanoparticles@2-amino-N-(2-aminoethyl) benzamide (MNPs@A-N-AEB.Pd0) have been presented as an efficient, and reusable magnetically heterogeneous catalyst for the C-O coupling reaction, namely Ullmann condensation reactions in an aqueous medium. This heterogeneous catalyst shows superior reactivity for the C-O arylation of different aryl halide (chloride, bromide, and iodide) with phenol derivatives to afford the desired products in good to excellent yields within short reaction time. Moreover, the catalyst can be easily recovered and reused for seven runs without loss of catalytic activity. The catalyst was characterized by several... 

A heterogeneous and recyclable catalyst with a high loading of silver nanoparticles was synthesized via the silver nanoparticles being supported onto the surface of magnetic nanoparticles coated with poly(4-vinylpyridine). The synthesized catalyst was used in the dehydrogenation of alcohols to corresponding carbonyl compounds. A broad diversity of alcohols was converted into their corresponding carbonyl compounds in excellent yields. The catalyst was easily recovered by applying an external magnetic field and reused for seven reaction cycles without considerable loss of activity. The catalyst was fully characterized using various techniques. Copyright © 2017 John Wiley & Sons, Ltd  

A new magnetic heterogeneous catalyst was synthesized by immobilization of nickel ions onto a cross-linked polymeric nanocomposite composed of cyanuric chloride, ethylenediamine and functionalized magnetic nanoparticles. The resulting nitrogen rich support was capable of adsorbing large amounts of nickel ions (1.20 mmol g−1). The synthesized catalyst was characterized using AAS, TEM, FT-IR, EDX, TGA, SEM, BET and XRD techniques. The performance of the prepared catalyst was investigated in the C-N coupling of arylamines with aryl boronic acids. The reaction was carried out under a mild condition and good to moderate to good yields of products was obtained using only 5.0 mol% of the catalyst....