Sharif Digital Repository

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

In the upstream asphaltene flow assurance community, both academics and industries are actively involved to predict the asphaltene deposit profile in wellbores and pipelines. Essential information for such a study is the amount of asphaltenes that can precipitate and, hence, deposit. In this work, the perturbed chain form of the statistical associating fluid theory (PC-SAFT) is applied to predict the asphaltene precipitation onset condition as well as the amount of precipitate under pressure depletion and high-pressure and high-temperature gas injection conditions. Previous PC-SAFT asphaltene studies in crude oil required the compositional data for both flashed gas and flashed liquid. This... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

Thermodynamic micellization model is known as an appropriate approach for prediction of asphaltene precipitation. However, the reliability (i.e. accuracy) of this model for whole range of pressure or injected gas mole percent must be checked. In practice, the accuracy can be improved by using a suitable characterization method. In this research, a computer code for implementing the thermodynamic micellization model has been developed. Having used this program, we make the prediction of asphaltene precipitation by using data reported in the literature as well as the experimental data obtained from high pressure, high temperature asphaltene precipitation experiments under gas injection... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

Enhanced oil recovery (EOR) methods are mostly based on different phenomena taking place at the interfaces between fluid–fluid and rock–fluid phases. Over the last decade, carbonated water injection (CWI) has been considered as one of the multi-objective EOR techniques to store CO2 in the hydrocarbon bearing formations as well as improving oil recovery efficiency. During CWI process, as the reservoir pressure declines, the dissolved CO2 in the oil phase evolves and gas nucleation phenomenon would occur. As a result, it can lead to oil saturation restoration and subsequently, oil displacement due to the hysteresis effect. At this condition, CO2 would act as in-situ dissolved gas into the oil... 

Injectivity decline due to mineral scale deposition in near wellbore region of water injection wells is one of the main challenging issues and have been widely reported in the literature. One of the main mechanisms of injectivity loss is incompatibility between injected and formation waters that may result in inorganic scale precipitation and subsequent deposition in porous media. Reliable reactive flow models to predict type and amount of scale along with permeability decline estimation allow planning and risk management of water flood projects. In this paper, we present a coupled geochemical and hydrodynamic model to simulate the scale precipitation and deposition of mineral scales in... 

Petroleum industry is moving toward enhancing oil recovery methods, especially water-based methods, including low salinity and smart water flooding which water with an optimized composition is injected into the reservoir for improving oil recovery. Injection of water into the target formation is also a common operation in geothermal energy production. As the water is being injected into the reservoir, pressure and temperature change along the well column and cause scale formation. Mineral scale precipitation and deposition is a common problem for water injection wells which reduces the effective radius of the wellbore and affects the injection efficiency. In this paper, modeling scale... 

This paper concerns on experimental investigation of biopolymer/polymer flooding in fractured five-spot systems. In this study, a series of polymer injection processes were performed on five-spot glass type micromodels saturated with heavy crude oil. Seven fractured glass type micromodels were used to illustrate the effects of polymer type/concentration on oil recovery efficiency in presence of fractures with different geometrical properties (i.e., fractures orientation, length and number of fractures). Four synthetic polymers as well as a biopolymer at different levels of concentration were tested. Also a micromodel constituted from dead-end pores with various geometrical properties was... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

Although Alkaline-Surfactant-Polymer (ASP) flooding is proved to be efficient for heavy oil recovery, the displacement mechanisms/efficiency of this process should be discussed further in fractured porous media especially in typical waterflood geometrical configurations such as five-spot injection-production pattern. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels which were initially saturated with heavy oil. The ASP flooding tests were conducted at constant injection flow rates and different fracture geometrical characteristics were used. The ASP solutions constituted of five polymers, two surfactants and three alkaline types. The results... 

Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

Optimization of the placement and operational conditions of oil wells plays an important role in the development of the oilfields. Several automatic optimization algorithms have been used by different authors in recent years. However, different optimizers give different results depending on the nature of the problem. In the current study, a comparison between the genetic algorithm and particle swarm optimization algorithms was made to optimize the operational conditions of the injection and production wells and also to optimize the location of the injection wells in a southern Iranian oilfield. The current study was carried out with the principal purpose of evaluating and comparing the... 

The increasing incidence of flow assurance problems caused by asphaltene deposition during oil production has motivated the development of numerous theoretical models and experimental methods to analyze this complex phenomenon. Even more challenging are the prediction of the occurrence and the magnitude of asphaltene deposition. It is well accepted that precipitation of asphaltene is a necessary condition for deposition. Hence, a significant amount of work has been devoted to the understanding of the conditions at which asphaltene precipitate from the crude oil. Although, several models seem to work well for correlating available data of onsets of asphaltene precipitation, they usually lack... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

A comprehensive understanding of the role of reservoir heterogeneities induced by flow barriers and connate water on sweep efficiency of different EOR scenarios is rarely attended in the available literature. In this work, different miscible/immiscible EOR processes were conducted on various one-quarter five-spot glass micromodels incorporating small-scale flow barriers. Microscopic and macroscopic observations revealed the reduction of sweep efficiency, premature breakthrough of displacing fluids, the severity of fingering at displacement front which leaves a large amount of oil behind the flow barriers untouched, and significant increasing trend of oil recovery after breakthrough in the... 

This work examines the operational parameters that may influence the performance of toe-to-heel steamflooding in a laboratory-scale simulation model built on the basis of the fluid and rock samples from a fractured, low-permeable, carbonate heavy oil reservoir in Southwestern Iran, called KEM (Kuh-e-Mond). Using vertical (V) or horizontal (H) injectors (I) and producers (P), the effects of different well configurations including VIVP, VIHP, 2VIHP, VI2HP, HIHP, and HI2HP, injectors' traversal distance, producers' traversal distance, and horizontal producer length have been investigated. In summary, the results show that 2VIHP scheme performs best in terms of oil recovery and areal/volumetric... 

Due to a large number of rich natural gas reserves in Iran, and considering the acceptable income from the exports of oil products, the consumption of gas instead of oil products in different consuming sectors seems to be rational. Therefore, in this article, the allocation of natural gas to different sectors such as residential, industries, power plants, transportation, reinjection to oil wells, export, and so forth is estimated based on the three scenarios using a linear programming method for the year 2025 in Iran. The results indicate that if there is no planned consumption management, the allocation of gas in future years will certainly have deficiencies in some sectors in Iran....