Sharif Digital Repository

Network-on-Chip combined with Globally Asynchronous Locally Synchronous paradigm is a promising architecture for easy IP integration and utilization with multiple voltage levels. For power reduction, multiple voltage-frequency levels are successfully applied to 2-D NoCs, but never with a generic approach to 3-D counterparts; in which low heat conductivity of insulator layers makes high dense temperature distribution at layers away from heat sink. In this paper, a thermal-aware methodology for regular 3-D NoCs based on multiple voltage levels is proposed. Given an application task graph, this methodology determines an efficient mapping of tasks onto network tiles, considering inherent... 

A circuit model based on the transmission line theory is proposed to analyze the recently introduced metal-insulator-metal (MIM) complementary split-ring resonators (CSRRs). It is shown that integer and noninteger modes of CSRRs can be characterized by transmission line models with short- and open-circuited terminals. The proposed circuit model is then extended to incorporate side-coupling effects between the CSRRs and straight MIM waveguides. Thereby, simple closed-form expressions are provided for the coupling quality factor. It is shown that waveguide resonator structures based on CSRRs at specific resonance frequency and bandwidth can be smaller than waveguide resonator structures based... 

An approximate and accurate enough multi-conductor transmission line model is developed for analysis of side-coupled metal-insulator-metal (MIM) waveguides. MIM waveguides have been already modeled by single conductor transmission lines. Here, the side coupling effects that exist between neighboring plasmonic structures are taken into account by finding appropriate values for distributed mutual inductance and mutual capacitance between every two neighboring conductors in the conventional single-conductor transmission line models. In this manner, multi-conductor transmission line models are introduced. Closed-form expressions are given for the transmission and reflection of miscellaneous MIM... 

During the year, due to weather conditions, the temperature fluctuations at surface level cause problems in underground pipes as a result of freezing water. One of the best prevention strategies is the use of polyurethane floor insulation for keeping the temperature of clay above zero degrees Celsius. In this study to calculate the minimum thickness of polyurethane insulation layer, the differential equation of energy is solved based on principle of separation of variables using imaginary eigenvalues for consistency with the temperature distribution in multi-layer consist of asphalt, gravel and polyurethane with finite thickness and clay as a semiinfinite medium with periodic thermal... 

The surface plasmon effect of Au nanostructures placed on the surface of hematite has recently been used to enhance light absorption within its carrier collection distance of 10 nm from the water-hematite interface. Despite significant narrow band absorption enhancements in the visible region, the reported enhancements in the overall performance of the cell under standard AM1.5 sunlight illumination are not significant. We numerically design an array of Au stripes on the surface of an extremely thin layer of hematite to maximize the number of charge carriers that can reach the hematite-water interface and explore the optical processes involved. The lateral dimensions and in particular the... 

Electrical properties and electronic structure of Bi1-xCa xFe1-yMnyO3-δ grown by pulsed-laser deposition on BaTiO3/SiO2/Si substrate were investigated. Results showed that Ca has drastic effect on symmetry of crystal and electrical poperties of BiFeO3. On the other hand, Mn revealed to have more radical effect on optical properties and energy gap of the compound. XPS results represented that although Ca tend to decrease Fe valence state, Mn tends to stabilize it at 3+ (at least in this concentrations). UV-visible study yielded bandgap of 2.51-2.81 eV (at 300 K) for different concentrations of Ca and Mn. UV-visible spectra also revealed sub-bandgap defect transitions at 2.2 and 2.4 eV.... 

An easy-to-design single-stub nano-coupler is proposed to increase the direct coupling efficiency between metal-insulator-metal (MIM) plasmonic and high-index dielectric waveguides. The modal reflection and transmission from the junction are exploited to provide a circuit description for the structure. The return loss of direct coupling is then minimized by loading the MIM waveguide with a single stub. Numerical examples are given, and the accuracy of the model is examined via finite-difference time-domain method  

In this paper, a novel structure for MOSFET like CNTFETs (MOSCNTs) is proposed, combining the advantages of both high and low dielectrics to improve output characteristics. In this structure, the gate dielectric at the drain side is selected from a material with low dielectric constant to form smaller capacitances, while a material with high dielectric constant is selected at the source side to improve on current and reduce leakage current. The new structure is simulated based on the Schrödinger-Poisson formulation. Obtained results show that the proposed configuration has lower off and higher on current in comparison with low-k MOSCNTs. Also, using a two-dimensional model, a wide range of... 

Reviewing the various Partial Discharges (PD data mining researches which have been reported so far, this study compares the performance of different feature spaces and different classifiers employed for PD classification in insulation condition monitoring of power transformers. In this process, first a knowledge basis is developed through construction of 4 different types of PD models in the high voltage laboratory. Background noise is considered as one class in this knowledge basis. The high frequency time domain current signals of high voltage equipment are captured over one power frequency cycle. The single PD activities within this captured signal are extracted by application of a... 

The electronic conductor-insulator transition in Ca-doped BiFeO 3 films grown by pulsed-laser deposition technique has been investigated. Nature of the transition is resolved to be Mott type through the control of band-filling. Calcium resolved to have colossal effect on enhancing the electrical conductivity of BiFeO 3, but it did not affect band gap of the mother phase perceptibly. UV-visible study yielded band gap of 2.72-2.81 eV (at 300 K) for different concentrations of calcium. Both UV-visible and photoluminescence spectra revealed sub-band gap transitions at 2.17 and 2.38 eV, of which the latter might be ascribed to the oxygen vacancies  

A transmission line model is developed for coupled plasmonic metal-insulator-metal (MIM) waveguides. In the proposed model coupling between electric fields of two plasmonic waveguides is modeled by distributed mutual capacitor while distributed mutual inductor accounts for magnetic field coupling. These mutual elements are determined using propagation constants of supermodes of coupled waveguides. The model is applied to analyze coupled line directional coupler and side-coupled rectangular resonators. The effectiveness of the model is assessed using fully numerical finite-difference time-domain (FDTD) technique. The results have excellent agreement with the numerical methods  

The particle-hole continuum (PHC) for massive Dirac fermions provides an unprecedented opportunity for the formation of two collective split-off states, one in the singlet and the other in the triplet (spin-1) channel, when the short-range interactions are added to the undoped system. Both states are close in energy and are separated from the continuum of free particle-hole excitations by an energy scale of the order of the gap parameter Δ. They both disperse linearly with two different velocities, reminiscent of spin-charge separation in Luttinger liquids. When the strength of Hubbard interactions is stronger than a critical value, the velocity of singlet excitation, which we interpret as a... 

An efficient circuit model is proposed for studying the electromagnetic characteristics of rectangular plasmonic cavities. The proposed model comprised a finite size transmission line terminated by scalar load impedances at its both ends. It is capable of the fast extraction of resonance frequencies, quality factors, and mode profiles of plasmonic resonators made by carving rectangles in metallic medium. The accuracy of the proposed model is assessed using the fully numerical finite difference time domain technique. It is employed for analysis and design purposes  

The exact numerical solution of the nonlinear Ginzburg-Landau equation for Josephson junctions is obtained, from which the precise nontrivial current density and effective potential of the Josephson junctions are found. Based on the resulting potential well, the tunneling probabilities of the associated bound states are computed which are in complete agreement with the reported experimental data. The effects of junction and bias parameters such as thickness of the insulating barrier, cross sectional area, bias current, and magnetic field are fully investigated using a successive perturbation approach. We define and compute figures of merit for achieving optimal operation of phase qubits and... 

A large number of generators failed due to stator winding problems, mainly insulation deterioration. Insulation degradation assessment plays vital role in the asset life management. Electro thermal analysis is the main characteristic for simulation of generator behavior and to improve the design of stator slot's insulation. Dielectric parameters such as insulation thickness, spacing, material types, geometry of winding and slot are major design consideration. A very powerful method available to analyze electro thermal performance is Finite Element Method (FEM) which is used in this paper. The analysis of various stator coil and slot configurations are used to design the better dielectric... 

In this paper, structural and electrical transport properties of hexagonal, 4H-type, BaRu1-xMnxO3 (x=0-0.3), synthesized by the solid-state reaction method at ambient pressure, have been presented. Electrical transport properties are measured over a temperature range of 10300 K in the magnetic field up to 15 kOe. The low temperature resistivity (10K