Sharif Digital Repository

A novel ion selective electrode is fabricated for naltrexone HCl and used in pharmaceutical analysis and drug determination in biological fluids without complicated pretreatments and extractions, using direct potentiometry. The naltrexone complex with sodium tetraphenyl borate (NaTPB) is obtained by in situ soaking PVC membrane electrode in an 1 × 10 -3 M naltrexone solution. The sensor exhibited fast, reproducible and linear sub-Nernstian response over concentration range of 1 × 10 -5 - 1 × 10 -3 M with a detection limit of 5 × 10 -6 M. The membrane sensor was successfully applied to the determination of naltrexone in capsules as well as for its determination in urine and plasma samples  

A carbon paste electrode (CPE) modified with 2,2′-[1,2 butanediylbis(nitriloethylidyne)]-bis-hydroquinone (BBNBH) and TiO2 nanoparticles was used for the sensitive voltammetric determination of epinephrine (EP). The electrochemical response characteristics of the modified electrode toward EP and acetaminophen (AC) were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results showed an efficient catalytic activity of the electrode for the electrooxidation of EP, which leads to a reduction in its overpotential by more than 270 mV. The effects of pH and potential sweep rate on the mechanism of the electrode process were investigated. The modified electrode exhibits an... 

An anion-selective electrode based on rhodium(II) phthalocyanine (RhPc) as a neutral carrier is reported. The prepared electrode displays an anti-Hofmeister behavior with a high selectivity for thiocyanate. The potentiometric response characteristics and selectivities of the membrane electrodes with various ratios of cationic additive to ion-carrier indicate that the observed potentiometric response is based on the formation of a 1:1 complex between RhPc and thiocyanate as an axial ligand. The membrane electrodes containing ∼60 mol percent of cationic additive (relative to ionophore) exhibit a near-Nernstian response in a concentration range of thiocyanate between 1 × 10-6 M to 1 × 10-1 M, a... 

The potentiometric response properties of several PVC-based membrane electrodes using phthalocyanine complexes of aluminum (AlPc), nickel (NiPc) and copper (CuPc) as anion carriers, toward thiosalicylic acid (TSA) were investigated. The influences of lipophilic ionic additives (cationic and anionic) and the pH of the buffered solutions were used for the interpretation of the mechanism of the potentiometric response of sensors. The sensitivity, linear range, detection limit, and potentiometric selectivity of the membrane sensors show a considerable dependence on the nature of central metal of the ionophore. The membrane electrodes based on AlPc demonstrate sub-Nernstian responses toward TSA... 

A metallophthalocyanine complex with zirconium(IV) ion in the center (as an oxo-zirconium, Zr=O, group) was used in poly vinyl chloride (PVC) membranes for the selective detection of 5-sulfosalicylic acid (SSA). The resulting electrodes demonstrate Nernstian responses over a wide range of sulfosalicylic acid concentration (10-6 to 10-1 mol dm-3) with a slope of about -29 mV per decade. The influence of lipophilic ion-exchanger sites on the response properties of the electrodes was investigated. The optimal potentiometric response was observed for the electrode in the presence of about 150 mol% of cationic additive (relative to ionophore) in the phase membrane. The electrodes have a fast... 

Electrochemical cells with two ion-selective electrodes, a cation ion-selective electrode against an anion ion-selective electrode, were used to measure the activity coefficient of amino acids in aqueous electrolyte solutions. Activity coefficient data were measured for (H2O + NaBr + glycine) and (H2O + NaBr + L-valine) at T = 298.15 K. The maximum concentrations of sodium bromide, glycine, and L-valine were (1.0, 2.4, and 0.4) mol · kg-1, respectively. The results show that the presence of an electrolyte and the nature of both the cation and the anion of the electrolyte have significant effects on the activity coefficients of amino acid in aqueous electrolyte solutions  

Copper phthalocyanine was used as ion carrier for preparing polymeric membrane selective sensor for detection of iodide. The electrode was prepared by incorporating the ionophore into plasticized poly(vinyl chloride) (PVC) membrane, coated on the surface of graphite electrode. This novel electrode shows high selectivity for iodide with respect to many common inorganic and organic anions. The effects of membrane composition, pH and the influence of lipophilic cationic and anionic additives and also nature of plasticizer on the response characteristics of the electrode were investigated. A calibration plot with near-Nernestian slope for iodide was observed over a wide linear range of five... 

The activity coefficient data were reported for (water + potassium chloride + DL-valine) at T = 298.15 K and (water + sodium chloride + L-valine) at T = 308.15 K. The measurements were performed in an electrochemical cell using ion-selective electrodes. The maximum concentrations of the electrolytes and the amino acids studied were 1.0 molality and 0.4 molality, respectively. The results of the activity coefficients of DL-valine are compared with the activity coefficients of DL-valine in (water + sodium chloride + DL-valine) system obtained from the previous study. The results show that the presence of an electrolyte and the nature of its cation have a significant effect on the activity... 

Salicylate selective electrodes based on oxo(phthalocyanato)-vanadium(IV) [VO(Pc), vanadyl phthalocyanine] and oxo(phthalocyanato)molybdenum(IV) [MoO(Pc), molybdenyl phthalocyanine] are described. The electrodes were prepared by incorporating the ionophores into plasticized poly(vinyl chloride) membranes, which were directly coated on the surface of graphite electrodes. The resulting electrodes demonstrate Nernstian responses over a wide linear range (10-7-10-1 M) salicylate. The electrodes have a fast response time, submicromolar detection limit, and could be used over the pH range of 6-9. The proposed sensors revealed selectivity for salicylate over a number of common inorganic and organic...