Sharif Digital Repository

We investigate the effect of wall roughness on water electrolyte transport characteristics at different temperatures through carbon nanotubes by using nonequilibrium molecular dynamics simulations. Our results reveal that shearing stress and the nominal viscosity increase with ion concentration in corrugated carbon nanotubes (CNTs), in contrast to cases in smooth CNTs. Also, the temperature increase leads to the reduction of shearing stress and the nominal viscosity at moderate degrees of wall roughness. At high degrees of wall roughness, the temperature increase will enhance radial movements and increases resistance against fluid motion. As the fluid velocity increases, the particles do not... 

Monomer grafting, a unique technique for polysaccharide modification, is always performed under inert (e.g., N2) atmosphere. This work is the first report related to evaluating the possibility and efficiency of the grafting of acrylonitrile (AN) onto starch in presence of oxygen. Thus, corn starch (in both granular and gelatinized states) as well as soluble starch were grafted by AN using a ceric-carbohydrate redox initiating system. Graft copolymerizations were performed under nitrogen, air, and oxygen atmospheres at similar conditions. Grafting occurrence was verified using chemical and spectral proofs. The polymerization mechanism and kinetics were investigated by recording the... 

Carboxymethylcellulose sodium salt (CMC) was doubly modified to prepare a novel poly(acrylamidoxime) chelating resin. Acrylonitrile was firstly graft polymerized onto CMC using cerium ammonium nitrate as an initiator. The polyacrylonitrile (PAN) grafted CMC was then amidoximized via treatment with hydroxylamine to prepare the ion exchange resin. The sorption capacity of the resin towards bivalent metal ions was evaluated while varying the pH, the loading of the PAN and the initial metal ion concentration. The adsorption kinetics were investigated for the cupric ion. The chelating resin exhibited very high metal sorption capacity in comparison with either synthetic or polysaccharide-based... 

As the first part of a continued research on conversion of carboxymethyl cellulosesodium salt (CMC) to useful biopolymer-based materials, large numbers of cyanide functional groups were introduced onto CMC by grafting with polyacrylonitrile (PAN). The graft copolymerization reactions were carried out under nitrogen atmosphere using ceric ammonium nitrate (CAN) as an initiator. Evidence of grafting was obtained by comparing FTIR spectra of CMC and the graft copolymer as well as solubility characteristics of the products. The synthetic conditions were systematically optimized through studying the effective factors including temperature and concentrations of initiator, acrylonitrile monomer,... 

Single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized in aqueous solutions containing FeCl2, FeCl3, FeSO4 and Fe2(SO4)3. The effects of iron charge and the counter ions on the formation of carbon nanotubes (CNTs) were investigated. Thermogravimetric (TG) analysis indicated that carbon multilayer structures including CNTs and multishell graphite particles were formed in deionized (DI) water without the iron precursor. SWCNTs were also synthesized in the presence of the iron ions. It was also found that the mole ratio of [Fe2+]/[Fe3+] in the solution has a significant influence on the purity of CNTs and the process yield. The highest yield was... 

Structural and intermolecular interactions of solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardt’s dye were investigated in the binary mixtures of 2-hydroxy ethylammonium formate as an ionic liquid with N,N-dimethyl formamide, dimethyl amine, and dimethyl sulfoxide. Solvatochromic parameters (ETN, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen -bond donor acidity) were determined in ionic liquid mixtures at 25 °C using UV−vis spectroscopy. ETN parameters obtained from absorbance of Reichardt’s dye within various mixtures of ionic liquid were observed to be higher than predicted values from ideal additive... 

Functionalized magnetic core–zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption–desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

A five-coordinated Fe(III) complex with the distorted trigonal bipyramidal configuration was synthesized by reactions of FeCl36H2O and 2-(2′-hydroxyphenyl)oxazoline (Hphox) as a bidentate ON donor oxazoline ligand. Complex [Fe(phox)2Cl] was fully characterized, including by single-crystal X-ray structure analysis. DFT calculations were accompanied with experimental results in order to obtain a deeper insight into the electronic structure and vibrational normal modes of complex. Oxidation of sulfides to sulfoxides in one-step was conducted by this complex as catalyst using urea hydrogen peroxide (UHP) in mixture of CH2Cl 2/CH3OH (1:1) under air at room temperature. The results show that using... 

One of the most relevant negative characteristics of high-capacity cathodes for lithium batteries is indeed non-flat voltage-time (V-t) or voltage-capacity (V-C) behaviour during charge-discharge. A clear rationale for this behaviour has not yet been addressed in the literature. Here, by means of density functional theory (DFT) calculations corroborated by basic experimental electrochemical characterization, we investigated both the thermodynamic and the kinetic aspects relevant to voltage variations during charge-discharge of Li2FeSiO4 intended as a model case. A simple physical model allowed us to take into account all the experimental evidence. We suggested that voltage deviations from... 

The use of adjusted/optimized saline water categorized into two different classes namely smart water (SW) and low salinity (LoSal) water injection has been proposed for more oil recovery from specific types of oil reservoirs. There are possible mechanisms concerning SW flooding that have been proposed in the literature, some of them are still subject to more examination. In this study, an experimental investigation is performed to determine the influence of type and amount of salt to the surface properties including interfacial tension (IFT) and contact angle (CA) of aqueous solution + acidic and asphaltenic crude oil + carbonate rock systems. For this purpose, the concentration of different... 

A highly sensitive and selective colorimetric method for detection of copper ions, based on anti-aggregation of D-penicillamine (D-PC) induced aggregated gold nanoparticles (AuNPs) was developed. Copper ions can hinder the aggregation of AuNPs induced by D-PC, through formation of mixed-valence complex with D-PC that is a selective copper chelator. In the presence of a fixed amount of D-PC, the aggregation of AuNPs decreases with increasing concentrations of Cu2+ along with a color change from blue to red in AuNPs solution and an increase in the absorption ratio (A520/A 650). Under the optimum experimental conditions (pH 7, [AuNPs] =3.0 nmol L-1 and [NaCl]=25 mmol L-1), a linear calibration... 

Precipitation of strontium sulfate (or SrSO4) has already been distinguished as one of the most costly and critical problems which may occur in process industries and oilfield operations. Costs due to scaling and remedial actions that need to be taken afterward are generally high owing to low solubility of SrSO4 in aqueous solutions. Therefore, a thorough understanding of the SrSO4 thermodynamic behavior under various operating conditions is vital to predict or even avoid the overall damage caused by scaling. The primary aim of this work is to develop a model based on Least Squares Support Vector Machine (LSSVM) and Coupled Simulated Annealing (CSA) referred to as CSA-LSSVM to predict... 

Deposition of barium sulfate (or BaSO4) has already been recognized as a devastating problem facing process industries and oilfield operations, mainly owing to its low solubility in aqueous solutions. Predicting and also preventing the overall damage caused by BaSO4 precipitation requires a profound knowledge of its solubility under different thermodynamic conditions. The main aim of this study is to develop a solubility prediction model based on a hybrid of least squares support vector nachines (LSSVM) and coupled simulated annealing (CSA) aiming to predict the solubility of barium sulfate over wide ranges of temperature, pressure and ionic compositions. Results indicate that predictions of... 

We investigate the effect of wall roughness on water electrolyte transport characteristics at different temperatures through carbon nanotubes by using nonequilibrium molecular dynamics simulations. Our results reveal that shearing stress and the nominal viscosity increase with ion concentration in corrugated carbon nanotubes (CNTs), in contrast to cases in smooth CNTs. Also, the temperature increase leads to the reduction of shearing stress and the nominal viscosity at moderate degrees of wall roughness. At high degrees of wall roughness, the temperature increase will enhance radial movements and increases resistance against fluid motion. As the fluid velocity increases, the particles do not... 

An efficient method is reported for selective oxidation of various types of sulfides to sulfoxides and sulfones in good to high yields using 30% H 2O2 in the presence of catalytic amounts of molybdate-based catalyst in acetonitrile as solvent at room temperature. The catalyst can be easily recovered and reused for seven reaction cycles without considerable loss of activity  

GAC has been modified by loading of potassium nickel hexacyanoferrate (KNiCF) as a new adsorbent for cesium adsorption. The potassium nickel hexacyanoferrate-loaded granular activated carbon (KNiCF-GAC) was characterized using powder x-ray diffraction (XRD) and nitrogen adsorption-desorption isotherm data, infrared spectroscopy, and its cesium adsorption performance in aqueous solution was investigated. The effect of the various parameters such as initial pH value of the solution, contact time, temperature, and initial concentration of the cesium ion on the adsorption efficiencies of KNiCF-GAC have been studied systematically by batch experiments. The adsorption isotherm of KNiCF-GAC was... 

In salting-out liquid-liquid extraction (SALLE) technique, water-miscible organic solvents are used for extraction of polar analytes from saline solutions. In this study, for the first time, a coupled 1-mL syringes system was utilized to perform a miniaturized SALLE method. Sulfanilamide antibiotic was extracted and determined via the developed method followed by high performance liquid chromatography-ultraviolet detection (HPLC-UV). The extraction process was carried out by rapid shooting of acetonitrile as extraction solvent (syringe B) into saline aqueous sample solution (syringe A), and then the shooting was repeated several times at a rate of 1 cycle s-1. Thereby, an extremely large... 

The objective of the work ahead is presentation of a new carbon paste electrode (CPE) modified by TiO2 nanoparticles (TiO2NPs) and 1,2-bis-[o-aminophenyl thio] ethane (APTE) ligand as a selective cation receptor for determination of the Cd (II) ions using differential pulse anodic stripping voltammetry (DPASV). The electrode shows an excellent tendency to Cd (II) ions in presence of some interfering species. Under the optimum conditions, a linear calibration curve was obtained in the concentration range of 2.9 nM to 4.6 μM with a correlation coefficient of 0.9969 in the anodic potential of 0.54 (V vs. Ag/AgCl). The metal detection limit was 2.0 nM after 10 min preconcentration (S/N = 3). The... 

We have investigated the water permeation through carbon nanotube (CNT) membranes as a model of peptide nanotube channels (PNCs). The effect of different charge configured CNTs which tailored based on some artificial ion channels on the water permeation through the channels have been studied. In addition, the temperature dependence of the permeation has been investigated. We have found that there is a jump in the permeation which is somehow related to the characteristics of each channel and the temperature of this permeation jump changes according to the channel configuration. Our investigation on the channels shows that the temperature at which the permeation jump occurs is related to the... 

Using non-equilibrium molecular dynamics simulations, we investigate the effects of nanotube size, mean flow velocity, ion concentration and temperature of an electrolyte water solution on shearing stress and nominal viscosity. It is shown that the distributed electric field arising from the electrolyte water solution has significant influences on fluid properties. Also, the temperature of the solution, which causes thermal movement, affects nanofluidic transport in nanoenvironments. The nominal viscosity and shearing stress increases as the tube diameter increases. When the temperature of solution increases or ion concentration decreases, the shearing stress and nominal viscosity increase....