Sharif Digital Repository

In this study, in order to investigate the effect of the underlying pore-scale processes on continuum scale simulations of porous media dissolution, we improve the standard Lattice Boltzmann method using Quadtree grid refinement approach to simulate fluid flow and reactive transport through large domain sizes. Our results have shown considerable computational improvements up to 80% in simulation time together with increased numerical accuracy. The results and the added value of the new approach are discussed using comparison of our model with the conventional LBM. Moreover, we have applied a systematic analysis by increasing complexity levels and starting from fluid flow and continuing with... 

Minimization of drop contact time is so important and critical for applications such as self-cleaning and anti-corrosion. In recent years, surface acoustic waves are presented as a powerful method for the manipulation of the drops. In this manuscript, a numerical study of drop shedding under the effect of acoustic waves is presented, which may have potential use in the anti-icing systems. Therefore, the effects of different parameters, such as acoustic wave frequency, amplitude, and direction of the wave on the water removal, are investigated. For this purpose, a color gradient lattice Boltzmann method (LBM) is developed and used in these simulations. The acoustic actuator effect is added as... 

The dynamics of droplet detachment from a surface is a fundamental topic studied in coating engineering, fluid mechanics, and subsurface engineering applications. This topic has direct relevance to wettability alteration using the modified ionic composition of water in contact with oil droplet, low salinity waterflooding (LSWF). Previous experimental studies of LSWF have shown a very long timescale in wettability alteration which cannot be explained using bulk diffusion coefficient. In the present study, we address both the time scale of detachment, as well as the impact of buoyancy and interfacial forces (referred to as Bond number) on droplet detachment by proposing an advanced... 

Purpose: The purpose of this study is to present a comprehensive hydrothermal analysis on an inclined mini-channel using numerical and experimental techniques. The fin array acts as heat source within the channel, and a wavy wall located at the top of the channel is heat sink. The side walls are insulated with curved profiles. Also, the channel is inclined with four known inclination angles. To solve the governing equations, the dual-multi-relaxation-time lattice Boltzmann method with D2Q9 and D2Q5 lattice models for flow and temperature fields is used, respectively. Also, the channel is filled with SiO2-glycol nanofluid. Design/methodology/approach: Identifying the behavior of a thermal... 

Several types of research are performed on flow control and this fact highlights the importance of this topic. Over the last two decades, actuators based on acoustic waves have attracted much attention and have been used in widespread applications from mixing to pumping. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behavior of a sessile drop in order to change the flow characteristics. For this purpose, the removal of water from surfaces and drop movement against gravity are considered. Flow dynamics is simulated using lattice Boltzmann method. The results show that the drop can be removed from the surface in a short... 

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor-in-Chief. Concern has been raised about the identity of the author “David Ross” as the listed institution has denied the affiliation of a person with this name. Further inquiry revealed that the names of the co-authors were added to the revised version of the article without notifying the handling Editor, which is contrary to the journal policy on changes to authorship. Also, the co-authors were not able to provide a reasonable description of their contribution to the article.... 

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the... 

Individual drops are suitable tools to study the liquid-fluid interfacial properties. In this work, force-displacement equation and non-linear oscillations of a pendent drop are numerically investigated. The presented novel force-displacement function allows following the dynamics of a pendent drop and realizing its elastic behavior. The growth and detachment of drop, which is pending due to gravity from a capillary tip, is considered (assuming high density and high viscosity ratios and immiscible two-phase flows). Two-dimensional multi-relaxation time lattice Boltzmann method (MRT-LBM) was used to simulate growth, detachment, and oscillations of the drop using a conservative model for... 

The objective of this study is to develop and apply an arbitrary Lagrangian-Eulerian unstructured finite-volume lattice-Boltzmann method (ALE-FVLBM) for solving two-dimensional compressible inviscid flows around moving bodies. The two-dimensional compressible form of the LB equation is considered and the resulting LB equation is formulated in the ALE framework on an unstructured body-fitted mesh to correctly model the body shape and properly incorporate the mesh movement due to the body motion. The spatial discretization of the resulting system of equations is performed by a second-order cell-centered finite-volume method on arbitrary quadrilateral meshes and an implicit dual-time stepping... 

This paper aims at the investigation of acoustic streaming produced by surface acoustic waves (SAWs) in a drop. Computational simulation of acoustofluidic phenomenon, using lattice Boltzmann method (LBM), presenting acoustic applications in flow control, and a relatively complete parametric study are the motivations of this work. For this purpose, a computational fluid dynamics modeling based on multi-relaxation time multi-component multiphase color gradient lattice Boltzmann method was used. The simulations were carried out at wave frequencies ranging from 20 MHz to 271 MHz and wave amplitudes ranging from 0.5 nm to about 350 nm. First, the non-dimensional form of Navier-Stokes equations... 

Surface acoustic waves have gained much attention in flow control given the effects arising from acoustic streaming. In this study, the hydrodynamic interference of a drop under surface acoustic waves is comprehensively investigated and the contact angle hysteresis effects are considered, too. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behaviors of drop. For these purposes, a multiple-relaxation-time color-gradient model lattice Boltzmann method is developed. In these case studies, wave frequency and amplitude were in the ranges of 20–60 MHz and 0.5–2 nm, respectively. In addition, the density ratio of 1000, the... 

Since the discovery of inertial focusing in 1961, numerous theories have been put forward to explain the migration of particles in inertial flows, but a complete understanding is still lacking. Recently, computational approaches have been utilized to obtain better insights into the underlying physics. In particular, fundamental aspects of particle focusing inside straight and curved microchannels have been explored in detail to determine the dependence of focusing behavior on particle size, channel shape, and flow Reynolds number. In this review, we differentiate between the models developed for inertial particle motion on the basis of whether they are semi-analytical, Navier-Stokes-based,... 

Micro-scale systems have gained considerable attention in recent years and a large amount of researches have been done in this field. In this study, the hydrodynamic interference of a droplet is comprehensively investigated under surface acoustic waves. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behavior of droplet. For these purposes, a two-dimensional multiple-relaxation-time color-gradient model lattice Boltzmann method is developed. This model is first validated by dynamical behaviors of a droplet subjected to shear flow. Moreover, displacement of a droplet affected by surface acoustic waves is comprehensively... 

Several lattice Boltzmann models for multi-phase flow have been developed, but few of them are capable of modeling fluid flows with high density ratio in the order of 1000. Therefore, an advanced chromodynamics, Rothmann-Keller (RK) type model is employed in current study, which can handle liquid-gas density ratio in the order of 1000 and viscosity ratio in the order of 100. Other distinctive characteristics of the proposed model are high stability, and capability of setting parameters such as surface tension independently. In spite of these benefits, the original RK model fails to model wetting tendency of the fluids. As a result, it is impossible to correctly simulate two-fluid phase flow... 

Due to the widespread use of rarefied gas flow in micro-porous media in industrial and engineering problems, a pore-scale modeling of rarefied gas flow through two micro-porous media with fractal geometries is presented, using lattice Boltzmann method. For this purpose, square- and circular-based Sierpinski carpets with fractal geometries are selected due to their inherent behavior for real porous media. Diffusive reflection slip model is used and developed for these porous media through this study. With this respect, the planar Poiseuille flow is selected as a benchmark and validated with the literature. The effect of Knudsen number (Kn) on the permeability is investigated and compared in... 

Dynamics of a drop under the influence of gravitational force was examined using lattice Boltzmann method and color-gradient model. The term associated with the buoyancy force caused by the density difference between the two phases was modified in the lattice Boltzmann equations and verified in some cases. The motion of n-butyl acetate drops in water was predicted in various deformation regimes. The modeling results were in good agreement with the experimental results, solutions obtained by common CFD methods and semi-empirical correlations. Contrary to the common multiphase models, the behavior of moving drops in oscillating regime was predicted with good accuracy using the present model.... 

The lattice Boltzmann simulation of natural convection fluid flow and heat transfer is performed. The double-MRT lattice Boltzmann method is employed. The D2Q5 and D2Q9 lattice models are used to simulate the temperature field and flow field, respectively. The configuration of the cavity is U-shaped, and the cavity is filled with CuO-water nanofluid. The KKL (Koo-Kleinstreuer-Li) model is utilized to estimate the thermal conductivity and dynamic viscosity; as well as, the nanoparticle shape effect on the thermo-physical properties of nanofluid is considered. The streamlines, temperature distribution, local entropy generation map, average Nusselt number, magnitude of total entropy generation... 

Purpose: This paper aims to to simulate the flow and heat transfer during free convection in a square cavity using double-multi-relaxation time (MRT) lattice Boltzmann method. Design/methodology/approach: The double-MRT lattice Boltzmann method is used, and the natural convection fluid flow and heat transfer under influence of different parameters are analyzed. The D2Q5 model and D2Q9 model are used for simulation of temperature field and flow field, respectively. The cavity is filled with CuO-water nanofluid; in addition, the thermo-physical properties of nanofluid and the effect of nanoparticles’ shapes are considered using Koo–Kleinstreuer–Li (KKL) model. On the other hand, the cavity is... 

Purpose: The nanofluid flow and heat transfer within a heat exchanger, with different thermal arrangements of internal active bodies, are investigated. Design/methodology/approach: For the numerical simulations, the lattice Boltzmann method is utilized. The KKL model is used to predict the dynamic viscosity of CuO-water nanofluid. Furthermore, the Brownian method is taken account using this model. The influence of shapes of nanoparticles on the heat transfer performance is considered. Findings: The results show that the platelet nanoparticles render higher average Nusselt number showing better heat transfer performance. In order to perform comprehensive analysis, the heatline visualization,... 

We study drag reduction of a uniform flow over a flat surface due to a series of rectangular microgrooves created on the surface. The results reveal that making grooves on the surface usually leads to the generation of secondary vortices inside the grooves that, in turn, decreases the friction drag force and increases the pressure drag force. By increasing the thickness of the grooves to the thickness of the obstacle, the pressure drag increases due to the enhancement of the generated vortices and the occurrence of separation phenomenon and the friction drag reduces due to a decrease of the velocity gradient on the surface. In addition, by increasing the grooves depth ratio, the pressure...