Sharif Digital Repository

Heart attack is one of the most common causes of death in the world. Coronary artery disease is the most recognized cause of heart attack whose onset and progression have been attributed to low-density lipoprotein (LDL) passing through the wall of the artery. In this paper, hemodynamic variables as well as the concentration of LDL through the coronary porous artery at the Left Anterior Descending coronary artery (LAD), and its first diagonal branch (D1) under the heart motion investigated using computational simulation. The geometry that has been studied in this paper is the first bifurcation of Left Anterior Descending (LAD) that has been placed on a perimeter of hypothetical sphere... 

We propose a new nonlinear Rao-Nam like symmetric key encryption scheme. In our design, we employ a specific type of coded modulation schemes namely quasi-cyclic low-density parity-check (QC-LDPC) lattice-codes which have low-complexity encoding and decoding algorithms. Due to the application of coded modulation schemes in our design, the proposed scheme performs encryption, encoding and modulation simultaneously. Therefore, we regard the proposed scheme as a joint cryptosystem. The proposed joint cryptosystem withstands all variants of chosen plaintext attacks applied on Rao-Nam like cryptosystems due to its nonlinearity. Moreover, some conditions implying the uniformity of the ciphertexts... 

E-waste has become one of the greatest sources of environmental pollution. Bioleaching is known as a new, simple, and environmentally friendly technology for metal recovery requiring low energy input, unskilled labor operations, moderate conditions, and low costs. Acidithiobacillus ferrooxidans is a famous and puissant mesophilic bacterium applied extensively to recover metals from ores and different industrial and municipal wastes. It is necessary to identify the parameters affecting consumers E-waste recycling. Separating and recovering different types of E-waste is impossible for small recycling units. There should be a specific combination of E-waste, enabling the extraction of the... 

Polystyrene, acrylonitrile butadiene styrene, and polypropylene are the main polymers in E-waste, existing about 31%, 16%, and 13%, respectively. In this research, the effects of the elimination of low-density materials (such as polymers and plastics) were studied using the shaking table method. Bioleaching of Cu and Ni against the original sample (Sample #1) and pre-treated sample without low-density materials (Sample #2) was compared. The amount of bioleached metals and growth characteristics (including pH, Eh, bacterial count) was investigated within 25 days. The analysis of Sample #1 showed that at pulp density of 15 g/l, 94% and 79% of Cu and Ni were recovered maximally, respectively,... 

Due to increased atherosclerosis-caused mortality, identification of its genesis and development is of great importance. Although, key factors of the origin of the disease is still unknown, it is widely believed that cholesterol particle penetration and accumulation in arterial wall is mainly responsible for further wall thickening and decreased rate of blood flow during a gradual progression. To date, various effective components are recognized whose simultaneous consideration would lead to a more accurate approximation of Low Density Lipoprotein (LDL) distribution within the wall. In this research, a multilayer Fluid-Structure Interaction (FSI) model is studied to simulate the penetration... 

Objective(s): This study aims to evaluate combined proton nuclear magnetic resonance (1H NMR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) metabolic profiling approaches, for discriminating between mustard airway diseases (MADs) and healthy controls and for providing biochemical information on this disease. Materials and Methods: In the present study, analysis of serum samples collected from 17 MAD subjects and 12 healthy controls was performed using NMR. Of these subjects, 14 (8 patients and 6 controls) were analyzed by GC-MS. Then, their spectral profiles were subjected to principal component analysis (PCA) and orthogonal partial least squares regression discriminant... 

Sulfur mustard (SM) is a vesication chemical warfare agent for which there is currently no antidote. Despite years of research, there is no common consensus about the pathophysiological basis of chronic pulmonary disease caused by this chemical warfare agent. In this study, we combined chemometric techniques with nuclear magnetic resonance (NMR) spectroscopy to explore the metabolic profile of sera from SM-exposed patients. A total of 29 serum samples obtained from 17 SM-injured patients, and 12 healthy controls were analyzed by Random Forest. Increased concentrations of seven amino acids, glycerol, dimethylamine, ketone bodies, lactate, acetate, citrulline and creatine together with the... 

McEliece and Goldreich–Goldwasser–Halevi (GGH) cryptosystems are two instances of code and lattice-based cryptosystems whose security are based on the hardness of coding theoretic and lattice problems, respectively. However, such cryptosystems have a number of drawbacks which make them inefficient in practice. On the other hand, low density lattice codes (LDLCs) are practical lattice codes which can achieve capacity over additive white Gaussian noise channel and also can be encoded and decoded efficiently. This paper introduces a public key cryptosystem based on Latin square LDLCs, by which a relationship can be attained between code and lattice-based cryptography. In this way, we can... 

Understanding the co-crystallization behavior of ternary polyethylene (PE) blends is a challenging task. Herein, in addition to co-crystallization behavior, the rheological and mechanical properties of melt compounded high density polyethylene (HDPE)/low density polyethylene (LDPE)/Zeigler − Natta linear low density polyethylene (ZN-LLDPE) blends have been studied in detail. The HDPE content of the blends was kept constant at 40 wt% and the LDPE/ZN-LLDPE ratio was varied from 0.5 to 2. Rheological measurements confirmed the melt miscibility of the entire blends. Study of the crystalline structure of the blends using DSC, wide angle X-ray scattering, small angle X-ray scattering and field... 

Ethylene-vinyl acetate-based nanocomposites with 18 and 28 wt% vinyl acetate were prepared via solution casting method. To improve the mechanical and barrier properties of ethylene-vinyl acetate, linear low-density polyethylene, and graphene oxide were introduced to matrix. The morphological studies indicated that the graphene oxide diffraction peak disappeared in all prepared nanocomposites, probably due to its exfoliation; also proper dispersion and good interaction between nanofillers and polymer matrix were achieved. By introducing low amount of graphene oxide into the matrix, the mechanical and thermal properties and oxygen permeability were improved especially for those with 28 wt%... 

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1-nm thickness and good transparency was synthesized using the well-known Hummers's method. Fourier transform infrared and X-ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are... 

The biodegradability rates of two different kinds of polyethylene bonded with corn and potato starch are studied in this paper. While it is usual to use soil as the environment for biodegradation, an aerated sludge tank was used in this studywhich offers a richermicrobialmediumand increases the rate of biodegradation. The biodegradability is determined by two ways: first, comparing differences in the weight change of two samples, one placed inside distilled water and the other placed in aerated sludge tank. Second test for biodegradation is by examination of FTIR spectroscopy. Through FTIR spectroscopy, the biodegradability rate and reduction in some of the existing bonds in polymer before... 

A vast amount of death in the world has been attributed to atherosclerosis. This disease causes plaque formation and finally lack of blood supply to an organ. The prominent aim of this study is proposing an accurate and simple model to investigate the process of arterial wall thickening. In order to investigate LDL (low density lipoprotein) accumulation in arterial wall which is considered the first stage of atherosclerosis, a four layer model for arterial wall consisting of endothelium, intima, IEL and media is presented. All layers are treated as homogenous porous media. The four-layer arterial wall model is the most powerful and reliable tool for modeling LDL transport within arterial... 

Molybdenum disilicide (ModSi 2) is an attractive structural material due to its unique combination of properties, namely excellent oxidation resistance, high melting point (2030°C) and relatively low density (6.3g.cm -3). The present work investigates joining of two MoSi 2 parts through Cusil/Zr/Cusil interlayer with Cusil being a commercial eutectic of Cu-Ag alloy. The joining operation was implemented in an inert gas tube furnace by brazing. The brazing temperature ranged at 830-930°C while the operation lasted for 1hr. Interfacial microstructure was studied by Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD) techniques. Applying the... 

The progressive-edge-growth (PEG) algorithm of Hu et al. is modified to improve the error floor performance of the constructed low-density parity-check (LDPC) codes. To improve the error floor, the original PEG algorithm is equipped with an efficient algorithm to find the dominant elementary trapping sets (ETS's) that are added to the Tanner graph of the under-construction code by the addition of each variable node and its adjacent edges. The aim is to select the edges, among the candidates available at each step of the original PEG algorithm, that prevent the creation of dominant ETS's. The proposed method is applicable to both regular and irregular variable node degree distributions.... 

Atomistic simulation was used to study the deformation and fracture mechanisms of Ni-Si interfaces under tensile and shear loads dependent on the crystal structure of interface zone. Modified embedded atom method (MEAM) potential was utilized for molecular dynamics (MD) modeling. The simulation includes analysis of common neighbors, coordination number, least-square atomic local strain, and radial distribution function. The profound effect of interface crystallography on the tensile and shear deformation is shown. The highest tensile strength is obtained for interfaces with high plane density due to lowest atomic disorder while under shear loading planes with low density exhibit a high local... 

The influence of electron beam (EB) irradiation and organoclay (OC) loading on the properties of low-density polyethylene (LDPE)/ethylene-vinyl acetate (EVA) blends was investigated. The samples were subjected to the EB irradiation with the dose values of 50 and 250kGy. X-ray diffraction (XRD), gel content, mechanical, thermal, and electrical properties were utilized to analyze the characteristics of the LDPE/EVA blends with and without OC at different irradiation dosages. Gel content analysis showed that the OC promotes considerably the insoluble part so that the LDPE/EVA blends filled with OC become fully crosslinked at 250kGy; possibly through the formation of further crosslinks between... 

Introduction: Today, Fuzzy expert systems have helped physicians in cases of uncertainty in medical decision making for prescribing drugs. Narrowing of coronary heart and reduction in heart blood flow are important causes of coronary heart disease (CHD). Control of blood lipid level is a routine treatment in CHD patients. But damage to liver is a common side effect of lipid lowering drug medication. Measurement of plasma Alanine aminotransferase level is considered as a marker of liver damage. The aim of this study was to determination of optimal dose of atorvastatin using Fuzzy expert system. Materials and Methods: in this study, Fuzzy expert system based on drug dose determination was... 

In this paper, new sequences (λn,ρn) of capacity achieving low-density parity-check (LDPC) code ensembles over the binary erasure channel (BEC) is introduced. These sequences include the existing sequences by Shokrollahi as a special case. For a fixed code rate R, in the set of proposed sequences, Shokrollahi's sequences are superior to the rest of the set in that for any given value of n, their threshold is closer to the capacity upper bound 1 - R. For any given δ, 0 < δ < 1 - R, however, there are infinitely many sequences in the set that are superior to Shokrollahi's sequences in that for each of them, there exists an integer number n0, such that for any n > n0, the sequence (λn, ρn)... 

Attempts were made to trace the effect of organoclay (OC) on the rheological and mechanical behaviors of the low density polyethylene (LDPE)/ethylene-vinyl acetate (EVA) blends. To do this effectively, in addition to LDPE/EVA/OC system, pure LDPE and LDPE/EVA blends were also examined as model systems. The rheological behavior was determined by the capillary rheometer. Morphological characterization was also carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and theoretical approach based on interfacial energies. Shear viscosity, tensile strength and elastic modulus of LDPE/EVA were found to decrease by increasing the EVA...