Sharif Digital Repository

Energy-efficient mixing is vital for chemical and fuel processes. To this end, a flow-focusing configuration is proposed to investigate the effect of a uniform magnetic field on the mixing of a water-based ferrofluid with two streams of deionized water. An external and varying magnetic field is imposed on a straight microchannel, and the mixing between the ferrofluid and deionized waters is qualitatively and quantitatively measured. A commercial code based on the finite-element method is used, and the simulations are validated by two experimental studies in the literature. For a magnetic flux density of 10 mT, a signal frequency of 1 Hz, a duty cycle of 0.3, an inlet velocity of 500 µm/s,... 

In this paper, the thermal conductivity of water-based hematite Fe2O3 and magnetite Fe3O4 nanofluids have been investigated in the absence and presence of a uniform magnetic field. The experiments have been performed in the volume concentration range of 0 % to 4.8 % and the temperature range of 20∘C to 60∘C. The effects of the particle volume fraction, temperature, and magnetic field strength on the thermal conductivity have been analyzed. Results show that the thermal conductivity of iron oxide nanofluids has a direct relation with the particle volume fraction and temperature, without the presence of a magnetic field. But surprisingly, when the magnetic field is applied, it is observed that... 

This paper presents the effects of a non-uniform magnetic field on the hydrodynamic and thermal behavior of ferrofluid flow in a wavy channel by 3D numerical simulation. The wavy surfaces at the top and bottom of the channel are heated by constant heat fluxes. Moreover, the sidewalls are adiabatic. In the wavy section, in the perpendicular direction of the main flow, the magnetic field that linearly varies along the direction of the main flow is applied. The mathematical model that is consistent with the principles of ferrohydrodynamics and magnetohydrodynamics is used for the problem formulation. The results indicate that the wavy wall enhances the heat transfer rate on the bottom of the... 

In this research work, graphene/cobalt nanocomposites are functionalized with polyethylene glycol (PEG) to be a platform for theranostics application and antibacterial activity. The non-covalent functionalization of PEG on the surfaces of nanocomposites improved their stability and diminished their cytotoxicity. The PEGylated nanocomposites are demonstrated to allow simultaneous administration of two cancer therapy methods such as magnetic fluids hyperthermia (MFH) which is carried out by converting magnetic energy into heat through ferromagnetic cobalt nanoparticles and heat generation through near-infrared optical absorption by the reduced graphene oxide. A concise simulation is carried... 

Achieving high efficiency and throughput in droplet-based mixing over a small characteristic length, such as microfluidic channels, is one of the crucial parameters in Lab-on-a-Chip (LOC) applications. One solution to achieve efficient mixing is to use active mixers in which an external power source is utilized to mix two fluids. One of these active methods is magnetic micromixers using ferrofluid. In this technique, magnetic nanoparticles are used to make one phase responsive to magnetic force, and then by applying a magnetic field, two fluid phases, one of which is magneto-responsive, will sufficiently mix. In this study, we investigated the effect of the magnetic field’s characteristics... 

The present work examines experimentally the effect of magnetic field on the viscosity and thermal conductivity of a hybrid nanofluid containing tetramethylammonium hydroxide (TMAH) coated Fe3O4 nanoparticles and Gum arabic (GA) coated carbon nanotubes (CNTs). The hybrid nanofluid was prepared by using ultrasonic dispersion method. Magnetic field was created by a pair of spaced apart magnet plates. The effect of temperature on the time variation of thermal conductivity under applied magnetic field was also investigated. According to the results of this study, viscosity of the hybrid nanofluid increases with the strength of magnetic field, while it decreases with the increase of temperature.... 

In this article, the influences of ferrofluid and magnetic field on the reactive absorption in packed-bed contactors have been investigated. Because of importance of carbon dioxide emission as a global concern, absorption of carbon dioxide was chosen to investigate these effects. In this regard, multitube approach was applied to model the contactor. The simulation results were validated against experimental data reported in the literature in the absence of nanoparticles and magnetic field and good agreement was obtained. Moreover, influences of various operating conditions on the contactor performance were investigated. It was found that for 3.4 vol.% of magnetic nanoparticles (MNPs), the... 

In this study, ferrofluid droplet formation from a nozzle in the presence of a non-uniform Pulse-Width Modulated (PWM) magnetic field with different angles was studied experimentally. A Drop-on-Demand platform was introduced and three different regimes of droplet formation were observed. The regime map of the droplet formation was presented. A new type of droplet formation evolution was observed in which the droplet is formed while it is swinging around the nozzle, and the satellite droplet is not generated in this regime. The effects of five important parameters including magnetic flux density, applied magnetic frequency, duty cycle, distance between the nozzle and the center of the upper... 

To increase heat transfer, ferrofluids have been utilized to study the effective parameters of pool boiling. Changes and possible enhancement of pool boiling heat transfer of magnetic fluids is a function of magnetic field and concentration of nanoparticles. To the best knowledge of the authors, no systematic experiments have been conducted to visualize the phenomena during the boiling of ferrofluids with different concentrations. In this study an experimental investigation has been conducted, by designing and fabricating a novel hele-shaw vessel with glass sides, to explore via visualizations some details in the pool boiling of ferrofluids. Boiling patterns of ferrofluids at various... 

This paper presents the prototype design, fabrication, and characterization of a magnetically actuated micropump. The pump body consists of three nozzle/diffuser elements and two pumping chambers connected to the ends of a flat-wall pumping cylinder. A cylindrical permanent magnet placed inside the pumping cylinder acts as a piston which reciprocates by using an external magnetic actuator driven by a motor. The magnetic piston is covered by a ferrofluid to provide self-sealing capability. A prototype composed of three bonded layers of polymethyl-methacrylate (PMMA) has been fabricated. Water has been successfully pumped at pressures of up to 750 Pa and flow rates of up to 700 μl min-1 while... 

Negative magnetophoresis is a novel and attractive method for continuous microparticle sorting inside a magnetic medium. In this method, diamagnetic particles are sorted based on their sizes using magnetic buoyancy force and without any labeling process. Although this method provides some attractive features, such as low-cost fabrication and ease of operation, there are some obstacles that adversely affect its performance, especially for biological applications. Most types of magnetic media, such as ferrofluids, are not biocompatible, and the time-consuming process of sample preparation can be threatening to the viability of the cells within the sample. Furthermore, in this method, both the... 

The effect of a permanent magnetic field on the heat transfer characteristics of hybrid graphene-magnetite nanofluids (hybrid nanofluid) under forced laminar flow was experimentally investigated. For this purpose, a reduced graphene oxide-Fe3O4 was synthesized by using two-dimensional (2D) graphene oxide, iron salts and tannic acid as the reductant and stabilizer. Graphene sheets acted as the supporting materials to enhance the stability and thermal properties of magnetite nanoparticles. The thermo-physical and magnetic properties of this hybrid nanofluid have been widely characterized and it shows that the thermal conductivity increased up to 11%. The hybrid nanofluid behaves as a Newtonian... 

Pulsating heat pipes (PHPs) are among the best solutions for the electronics cooling due to their low cost, effectiveness and being passive. Experiments to study the effective factors on heat transfer performance have been designed and as a result, improvement of ferrofluid PHP performance has been achieved. Two different heat pipes made of copper and glass were prepared to investigate the behavior of magnetic nanofluids. In order to find the best condition for heat transfer performance, different concentrations of nanofluid with a filling ratio of 50% were tested in 3 different cases of magnetic field. The results indicated that the ferrofluid is more stable in the glass PHP. It also shows... 

In this work, forced-convection heat transfer of magnetic-sensitive nanofluids has been investigated in the presence of rotating magnetic field. In this regard, the laminar, Newtonian, incompressible, and two-dimensional (2D) fluid flow in a horizontal duct subject to constant wall temperature boundary condition was modeled. Moreover, the fluid was supposed to be non-electrical conductive and the magnetic field source comprised of two time varying components perpendicular to each other. Influences of magnetic field intensity and frequency, inlet fluid velocity, and spin viscosity on the forced-convection heat transfer of the magnetic nanofluids were investigated. It was found that the... 

In this study, the effects of ferrofluids on the forced convective heat transfer in a tube with a round cross section under constant heat flux in the laminar flow regime are investigated experimentally. For this purpose, an experimental setup was designed and built. Furthermore, the effects of an external magnetic field on the forced convective heat transfer were examined for various Reynolds numbers and volume concentrations. The parameters of magnetic field strength, magnetic field arrangement, the constancy or oscillation of the magnetic field and also its oscillatory mode were examined. As a result of the experimental studies, in the absence of a magnetic field enhancement in convective... 

In this article, three-dimensional (3D) forced-convection heat transfer of magnetic nanofluids in a pipe subject to constant wall heat flux in the presence of single or double permanent magnet(s) or current-carrying wire has been investigated and compared. In this regard, laminar fluid flow and equilibrium magnetization for the ferrofluid were considered. In addition, variations of magnetic field in different media were taken into account and the assumption of having a linear relationship of magnetization with applied magnetic field intensity was also relaxed. Effects of magnetic field intensity, nanoparticle volume fraction, Reynolds number value, and the type of magnetic field source... 

Hyperthermia generally means as increasing the temperature of particular region of body to rise 5 °C above the body's physiological temperature. Here, we investigate the thermal therapy of PEGylated cobalt ferrite nanoparticles prepared by hydrothermal approach on cancerous cell line in the alternative current magnetic field. To characterize of the magnetic nanoparticles (MNPs), scanning electron microscopy, dynamic light scattering, X-ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometer were used. X-ray diffraction analysis confirmed the spinel phase formation of the MNPs. Cytotoxicity of MNPs using MTT assay on L929 cell lines showed the PEGylated... 

In this article, effects of magnetic fields induced by a finite length solenoid on the forced-convection heat transfer in a pipe partially filled with porous medium have been investigated. In this regard, two-dimensional steady-state fluid flow in the pipe was considered and the Darcy–Brinkman equation of motion was applied to model the fluid flow in the porous medium, as well as the thermal equilibrium was assumed between the solid phase and the magnetic nanofluid. Effects of electric current passing through the solenoid and the solenoid dimensions (i.e.; diameter and length) on the forced-convection heat transfer were studied carefully. The combined effects of the magnetic field and the... 

Magnetically actuated droplet manipulation offers a promising tool for biomedical and engineering applications, such as drug delivery, biochemistry, sample handling in lab-on-chip devices and tissue engineering. In this study, characteristics of an adjustable alternating magnetic field generated by a magnetic coil for droplet manipulation was investigated which enables more control on droplet transport, and it can be considered as a suitable alternative for moving magnets or an array of micro-coils. By adjusting the magnetic flux density, the duty cycle and applied magnetic frequency, the manipulation of water-based ferrofluid droplets with a bio-compatible surfactant for different volumes... 

Ferrofluid has been used in many fields, such as microfluidics, droplet formation, and heat transfer, due to its potential to be attracted in the presence of a magnetic field. Droplet formation, itself, has many applications such as emulsions, 3D micro-printers, MEMS, and electro-sprays. In this study, the mechanism of ferrofluid droplet formation from the nozzle in the presence of an alternating magnetic field was investigated. The magnetic coil was fixed at different angles with respect to gravity and the effect of the alternating magnetic field and the angle of the magnetic coil axis with respect to gravity on the produced droplet volume, satellite droplet, and droplet formation frequency...