Sharif Digital Repository

Gravity drainage is known to be one of the most effective methods for oil recovery in fractured reservoirs. In this study, both free fall and controlled gravity drainage processes were studied using a transparent fractured experimental model, followed by modelling using commercial CFD software. The governing equations were employed based on the Darcy and mass conservation laws and partial pressure formulation. Comprehensive examination was done on variables such as fluid saturation, velocity, and pressure distribution in the matrix and fracture, as well as fluid front level and production rate. Additionally, effects of the model parameters on the gravity drainage performance were... 

Gas flooding processes have emerged as attractive enhanced oil recovery (EOR) methods over the last few decades. Among different gas flooding processes, CO2 flooding is recognized as being most efficient for displacing oil through miscible displacement. Minimum miscibility pressure (MMP) is a crucial parameter for successfully designing CO2 flooding, which is traditionally measured through time-consuming, expensive, and cumbersome experiments. In the present study, a new reliable model based on feed-forward artificial neural networks was presented to predict both pure and impure CO2-crude oil MMP. Among various properties and parameters, reservoir temperature, reservoir oil composition, and... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

Production from gas condensate reservoirs requires precise determination of reservoir fluid properties along with their positive impact on real reservoir performance evaluation and fluid in place volume calculation. This fact is particularly important because liquid drop out phenomena occurs as a result of pressure drop due to fluid production and condensate remains in reservoir [Mohebzadeh, 2005. In this study the challenges and problems of fluid phase behavior simulation in southern Iranian retrograde gas condensate reservoirs is discussed. Most of the problems and challenges are inaccuracy of equation of states near the critical point, special conditions and produced fluid flow... 

Characterizing the electrical resistance of the formation rock is of great importance in, for example, interpreting the well log data, calculating the porosity, and water saturation for the formation rocks. The relation between the resistivity factor and porosity and also between the resistivity index and water saturation (Archie equation) in the formation rock uses the parameters, such as the cementation factor and saturation exponent. However, the direct application of Archie equation to carbonate rocks that are very heterogeneous and mostly oil-wet needs further investigation. In this experimental work, the effects of overburden pressure, temperature, and interfacial tension on the... 

The low salinity water injection has become one of the most important studies in the oil industry for improving oil recovery compared to conventional seawater injection. Thus, extensive studies have been conducted in carbonate and sandstone reservoirs to investigate how the physical properties of rocks and the chemical composition of fluids influence low salinity effect, while, the carbonate reservoir rocks requires more investigation of the effect of molecular and/or ionic interactions. In this experimental work, the effectiveness of various water flooding schemes in carbonate reservoir rock samples is investigated. In this regard, the oil recovery potential of seawater (SW), reservoir... 

Engineered water (EW) flooding is one of the enhanced oil recovery (EOR) techniques in carbonate reservoirs. In this method, the wettability of reservoir rock is altered by controlling the amount of various ions in the injected brine. The thermodynamics of wettability is related to the surface interactions and stability of water film on a rock surface. It can be identified by calculating disjoining pressure isotherms. In this study, core flooding tests, contact angle and zeta potential measurements along with the disjoining pressure isotherm calculation by the DLVO theory were used to investigate the wettability alteration of dolomite rock. Four brines include reservoir formation water... 

Phase behavior of active crude oil/alkaline was systematically studied in the presence of cosolvents. For this purpose, several factors have been considered: alkaline concentration, oil concentration, and type of brine. The best composition was used to generate emulsion for rheology and displacement tests. Furthermore, precipitation of alkaline was eliminated by its synergy with EDTA. Next, rheology of emulsion was analyzed by which a Power law model was developed that indicates non-Newtonian behavior of emulsion. Moreover, the viscosity of emulsion was reduced by the addition of cosolvent as well as by the increase of alkaline concentration. Finally, the best formulation (containing... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

In recent years, improving oil recovery (IOR) has become an important subject for the petroleum industry. One IOR method is infill drilling, which improves hydrocarbon recovery from virgin zones of the reservoir. Determining the appropriate location for the infill wells is very challenging and greatly depends on different factors such as the reservoir heterogeneity. This study aims to investigate the effect of reservoir heterogeneity on the location of infill well. In order to characterize the effect of heterogeneity on infill well locations, some geostatistical methods, e.g., sequential gaussian simulation, have been applied to generate various heterogeneity models. In particular, different... 

Wettability is a key parameter affecting petrophysical properties of reservoir rocks. Mirzaei-Paiaman et al. (Energy Fuels 27:7360–7368, 2013) presented an index (referred to as MPMS) for laboratory characterization of wettability of native- or restored-state reservoir rock samples. To use this index two counter-current spontaneous imbibition (COUCSI) experiments are needed, one on the native- or restored-state core sample and another on the strongly water-wet (SWW) reference system. Slope analysis of recovery data in these two systems gives inputs for determination of MPMS index. The two systems must have the same pore structure, initial water saturation, and viscosity ratio. The case of... 

Reservoir heterogeneity has a major effect on the characterization of reservoir properties and consequently reservoir forecast. In reality, heterogeneity is observed in a wide range of scales from microns to kilometers. A reasonable approach to study this multi-scale variations is through fractals. Fractal statistics provide a simple way of relating variations on larger scales to those on smaller scales and vice versa. Simple statistical fractal models (fBm and fGn) can be useful to understand the model construction and help the reservoir structure characterization. In this paper, the fractal methods (fGn and fBm) have been applied to characterize and to estimate of reservoir properties.... 

The relation between porosity and permeability parameters in carbonated rocks is complicated and indistinct. Flow units are defined with aim of better understanding reservoir unit flow behavior and relation between porosity and permeability. Flow units reflect a group of rocks with same geological and physical properties which affect fluid flow, but they do not necessarily coincide with boundary of facies. In each flow unit homogeneity of data is preserved and this homogeneity fades in the boundaries. Here, in this study, three methods are used for identification of flow units and estimation of average porosity and permeability in three wells of Tabnaak gas field located in south of Iran.... 

Determining the time of breakthrough of injected water is important when assessing waterflood in an oil reservoir. Breakthrough time distribution for a passive tracer (for example water) in percolation porous media (near the percolation threshold) gives insights into the dynamic behavior of flow in geometrically complex systems. However, the application of such distribution to realistic two-phase displacements can be done based on scaling of all parameters. Here, we propose two new approaches for scaling of breakthrough time (characteristic times) in two-dimensional flow through percolation porous media. The first is based on the flow geometry, and the second uses the flow parameters of a... 

It has been shown that one kind of poly silicon particles with sizes ranging from 10-500 nm, can be used in oilfields to enhance the oil recovery of water injection by 15-20%. The contributing mechanism might be reducing the interfacial tension which appears through improving relative permeability of the oil-phase. However, fundamental understanding of how hysteretic behavior of relative permeability curves affected by nanosilica particles remains a topic of debate in the literature. In this study, water as well as water dispersed nanosilica particles floods was performed on sandstone rock sample saturated by light crude oil supplied from one of Iranian oil reservoir, and the relative... 

The coning phenomenon usually occurs in water and gas cap drive reservoirs. Water coning in Iranian hydrocarbon reservoirs is one of the most important problems that affects the cumulative production, operation costs and causes environmental problems. Before producing from a reservoir, its fluids are in equilibrium and their contact surfaces remain unchanged, but after starting production from the reservoir, when the viscous force overcome gravitational force in vertical direction, contact surfaces will displace and coning will occur. So, the production rates will be controlled in a range that prevents entering water and gas to the production well. For this reason, investigation and modeling... 

In this study a new iterative algorithm is developed to evaluate dispersivity in fracture and matrix, distinctly. The novelty of proposed algorithm is using mathematical model of solute transport in fractured porous media coupled with experimental data iteratively. A fractured glass micromodel has been designed to visualize the interaction between fracture and matrix during displacement of n-Decane by n-Octane at constant rate. The similarity between numerical and experimental model has been enhanced by reducing the assumptions which were applied in previous related studies. The iteration is performed on velocity components of solute transport and longitudinal as well as transversal... 

Obtaining a reliable reservoir permeability map that is consistent with all available data is of great important for reservoir engineers. However, there is not enough core from existing wells to estimate the reservoir permeability directly but Well log data are more widely available. This study aims to model permeability within the reservoir while there is no enough data. In particular, we use artificial neural networks to estimate permeability using four input logs of sonic, gravity, porosity and neutron logs in six existing wells. In order to eliminate the correlated data, we have done Principal Component Analysis on selected input logs. Collocated cokriging is considered as a valuable... 

The knowledge of the connectivity across the reservoir not only helps to find out the potential oil recovery within a particular well configuration but also affects on the other reservoir engineering decisions such as infill drilling. Connectivity also controls the swept fraction of the hydrocarbon in place in secondary displacement other than the recoverable rates of the hydrocarbon. Most of the time we need a fast estimation of connectivity for decision making during field development. Percolation theory is a very useful tool to get this goal. According to this fact that the results of this method are universal, they could be used widely. During this study a percolation model is developed... 

The knowledge of the conductivity across the reservoir that is based on the swept fraction controls the recoverable rates of the hydrocarbon in the secondary displacement processes. Most of the time, we need a fast estimation of the conductivity for decision making during field development. Percolation theory is a very useful tool to get this goal. According to this fact that the results of this method are universal, they could be used widely. In this study connectivity and conductivity percolation models are developed and the universal exponents for connectivity and conductivity in fractured reservoir as well as their dependency on the correlation length are investigated. For L< ξ the...