Sharif Digital Repository

Vortex flow reactor (VFR) is used for biochemical reactions and separation applications. By using the second flow regime, called Taylor-Couette flow, VFR provides high amounts of mass transfer and mixing for biological components sensitive to shear stress. Mass transfer in a bench-scale Taylor-Couette contactor with a radius ratio, equal to 0.77 and an aspect ratio, equal to 30.7 was studied for solid particles dissolution. The working fluid was water and the suspended particles were benzoic acid. In this project the concentration of fluid phase was measured by injection of definite amount of the solid particles in to the contactor and sampling in different time intervals and the effects of... 

There are many different opinions about the mass transfer contribution during jet formation in liquid - liquid extraction columns, and this could impact on their design. In this work, using experimental data obtained in two RDC columns and unpublished data of the jet mass transfer coefficients, mass transfer can be predicted during jet formation. The jet length and diameter were anticipated by using existing relations, and then the jet mass transfer coefficient was predicted, jet mass transfer rate and total column mass transfer rate were calculated and finally the contribution of mass transfer during jet formation in the column was predicted. Mass transfer contribution in the jet in various... 

Liquid-liquid extraction is one of most important processes in chemical industries. So determination of operating condition effects is very critical. In this thesis we modeled concentration profile in the jet via mathematical equations and compare with experimental data. The major problem in concentration profile and solving equations is lack of knowledge in velocity profile within the jet was formed. Therefore, different flow models such as piston flow model, parabolic flow model, vortex flow model and a cone flow model was used and terminal concentrations inside the jet compared with laboratory values. Results shows the most accurate model to predict the flow concentration along the... 

Nanofluids are new engineering materials with great potential for application in process industries. Their enhanced heat-transfer properties are reported in recent literatures. However, with respect to the influence of nanoparticles on mass transfer characteristics, limited number of studies available in the literature, deal primarily with gas-liquid systems. In this work, mass transfer performance and droplet behavior along a pulsed liquid-liquid extraction column, is studied where SiO2 nanoparticles with concentrations of 0.01, 0.05 and 0.1 vol% and different hydrophobicities are applied to the dispersed phase. Using ultrasonication, nanoparticles were dispersed in kerosene as the base... 

In present study, it is tried to investigate the effect of physical properties on hydrodynamic and overall mass transfer coefficient of single drops using different experiments and then simulation of drop motion with OpenFOAM software version 1.7.1. the systems were choosen are toluene/acetone/water and n-butanol/succinic acid/water which their interfacial tensions are 36 and 1.6 mN/m respectively. Various type of nozzles have been used for produce of 1.5, 2, 3 and 4 millimeter drops. The results show that in absence of solute component, the rising velocity of toluene drops in each size is higher than rising velocity of butanol drops inside the water between 25 to 75 percent. But with... 

In this study, the numerical simulation of cavitating flows for cryogens fluids is performed. The algorithm employs the homogenous, multiphase Euler/Navier-Stokes equations with the interface capturing method. The thermodynamic and thermal effects substantially impact the cavitation dynamics of cryogenic fluids and therefore these effects should be considered by solving the energy equation in conjunction with the mass and momentum conservation, and updating the fluid physical properties. Here, two cavitation modeling strategies, namely, the barotropic cavitation model and the transport equation-based model are used. Both laminar and turbulent cavitating flows are studied in this work. For... 

Importance: Age related cataract is the major cause of blindness worldwide.in recent years several studies has been done with the aim of understanding the cataract process, but no attempts has been done for simulation and study of the vitreous aging and its effect on cataract.
Objective: To investigation and determination of effective mechanism for increasing oxygen in vitreous humor and simulation the oxygen tension changes with vitreous degeneration with age or vitrectomy.Methods: Effects of changes in chemical composition of vitreous humor with age or vitrectomy on oxygen solubility is studied by thermodynamic relations. The posterior segment of the eye is modeled using transport... 

In this dissertation, mass transport in cardiovascular system has been simulated using one-dimensional approach. As one-dimensional simulation has computation cost less than that of the three-dimensional simulations, and as it is more precise than lumped models, they are extensively used in the study of the phenomena in cardiovascular system. In addition, such an approach is more useful in the extraction of medical indices. In this study, a one-dimensional geometry of the systemic arteries has been used to solve momentum and continuity equations using characteristics method.
At first, the physiological data of the systemic arteries have been used to simulate a one-dimensional geometry... 

In this study the effect of nanoparticles on the mass transfer of dispersed phase in the liquid-liquid extraction systems, containing toluene with acetic acid as dispersed phase and saturated water of toluene as continues phase was investigated. For the ease of dispersion of nanoparticles in nonpolar organic dispersed phase, with the use of a novel method, hydrophobic tiania nanoparticles were synthesized and during producing with the sole-gel method were modified by adding Tetraethyl Ortho titanate as modifying agent, also the smallest hydrophobic nanoparticles of magnetite were synthesized by co-precipitating method and then, under optimum thermal condition were coated by adding Oleic... 

Dissemination of an analyte under the laminar flows plays a major role in measuring and assessment of biological fluids such as sample preparation in the context of microfluidic systems. Due to the development of manufacturing technology in the Lab-on-a-chip devices, the production of rectangular microchannels with finite aspect ratios and micron and submicron sizes has been provided by which the effect of electrokinetic phenomena on concentration distribution will be magnified in these systems. On the other hand, these biofluids are viscoelastic and show extraordinary flow behaviors, not existing in Newtonian fluids and adopting appropriate constitutive equations these exotic flow behaviors... 

The theory of mass transfer accompanied by chemical reaction for gas-liquid systems was used to measure the specific interfacial area and mass transfer coefficient in a two impinging jets reactor (TIJR) in the presence of γ-Al_2 O_3 nanoparticles.The absorption of oxygen in sulfite solutions used for the determination of mass transfer characteristics. First 3 liters of nanofluids were prepared at concentration of 1 w% then diluted To produce 10 Liters of nanofluids containing 0.3 w%. The stability of this nanofluid was determined using uv-vis to be less more than 95% in the first 3 hours. The influence of weight percent of nanoparticles (0, 0.05, 0.1, 0.15, 0.2, 0.3) on the specific... 

Given two stationary random measures on Rd, we study transport kernels between them that are translation-covariant. We will provide an algorithm that constructs such a transport kernel, with some assumption on their intensities. As a result, this algorithm can be used to construct the Palm version of an ergodic random measure by simply applying a (random) translation and vice versa, to reconstruct the distribution of the random measure from its Palm distribution. Given realizations of the two random measures, our algorithm provides its result in a deterministic way. The existence of such transport kernels is proved in [18] in an abstract way. Nevertheless, there has been tremendous interest... 

In this research, separation of carbon dioxide from a mixture of CO_2-N_2 with the aid of liquid membrane containing immobilized solution of diethanolamine-triethylene, known as facilitated liquid membrane, (DEA-TEG) in porous and hydrophilic poly vinylidene fluoride (PVDF) substrate was experimentally and theoretically carried out. The effects of DEA concentration, CO_2 partial pressure, and thickness of membrane on permeability coefficient, facilitation factor, permeation rate and selectivity of liquid membranewere investigated and importance of mass transfer resistance in gas phase on permeability or liquid membrane performance was also shown. Reversible reaction of complex formation... 

The main objective of this project is to study the effect of the presence of nanoparticles on mass transfer in liquid-liquid systems. To do this research, TiO2/water, Al2O3/water, CNTs/water and CNTs/toluene have been used as nanofluids. The experiments of TiO2/water nanofluid were been carried out in water-acetone-toluene system at two weigh percents of TiO2 nanoparticles. The result showed that mass transfer decreased in 0.5wt% of TiO2, compared to base fluid, and it increase in 1 %wt. Also in 0.5%wt the decrease in interfacial tension decreased diameter of drops and as a result mass transfer decreased too. In 1%wt the increase in viscosity increased the diameter of drops and then the... 

In this research the performance of the Moving Bed Biofilm Rector (MBBR) in different amounts of dissolved oxygen (DO) was investigated. Reactor with a useful volume of 15 liters was used in this study. In order to obtain optimum oxygen concentration, stayed at 6, 10 and 15 hours, and at different levels of dissolved oxygen in the range 0.5 -6 mg/lit, the amount of organic material was removed respectively. Also, in two different aeration intensity of 3.5 and 5.5 liters per minute at different values of e% (percentage of filling of media) the mass transfer coefficient values were obtained. When the aeration intensity increases from 3.5 to 5.5 liters per minute, and the percentage of 40%... 

Magnetite (Fe3O4) nanoparticles were synthesized and coated with Oleic Acid using the co-precipitation method. The particles were characterized using DLS, FT-IR, SEM, XRD, VSM and UV-Vis spectrophotometry analysis. The mean size of particles was 28.8 nm and the FT-IR analysis indicated that Oleic Acid was coated suitably on the nanoparticles. The vsm test indicated no hysteresis loop for the particles, defining the superparamagnetism of them. A nanofluid containing nanoparticles in 5wt% Acetic Acid in Toluene as the base fliud was prepared. The stability of this nanofluid was determined using UV-Vis spectrophotometry to be less more then 95% in the first two hours. This nanofluid is used as... 

In this research, surface reaction phenomenon in porous media has been numerically simulated in pore scale. The main interesting part in this kind of physics is surface reaction exposed to a flow field. In this regard, an in-house code, based on LBM was developed. To speed-up our simulation, parallel computing was used on a GPU platform leading to a significant speed-up. Also, to model a real complex geometry, X-CT and MRI medical imaging technique were used to accurately model several complex 3D geometries. While, image processing technique was used to model our 2D geometries. The basic equilibrium equation of isopropanol dehydrogenation was considered to simulate and to analize chemical... 

High mixing efficiency and high liquid-liquid mass transfer rate are two key features of spinning disk contactors. This work presents the experimental investigation of mixing and liquid-liquid mass transfer characteristics in a new double coaxial spinning disks contactor. The micromixing efficiency was investigated using a standard system of competitive parallel reaction known as iodide/iodate test reaction. The influences of various operating conditions such as the rotational speed of the disks, the direction of rotation, the feed radial location, the feed distribution pattern, the distance between the disks, and the feed flow rate on the mixing quality were examined carefully. The obtained... 

The main objective of the present work was to improve the turbulence in single drops using ferrofluids (magnetic nanoparticles) in the presence of uniform and oscillating magnetic fields. In this regard, magnetite nanoparticles ($\mathrm{Fe_3O_4}$) were synthesized by co-precipitation method, characterized using DLS, FT-IR, XRD, VSM, and TEM, and their stability was checked by UV-Vis. The obtained results indicate the proper synthesis of nanoparticles with a mean diameter of about 20 nm and by coating their surfaces by silane that were well stabilized in the base fluid. In the numerical section, the governing equations of transport phenomena for a single drop containing magnetic fluids were... 

It has been shown that absorption of carbon dioxide can be enhanced using nanoparticles and in the presence of magnetic field. In the present work, the influences of ferrofluids and magnetic fields on the absorption of CO2 in packed-bed contactors have been investigated carefully. In this regard, multi-tube approach has been applied to model the contactor. The simulation results were validated against experimental data reported in the literature in the absence of nanoparticles and magnetic fields and good agreement was obtained. The influences of variable operating conditions on the contactor performance were carefully investigated. It was found that for 3.4% volume percent of magnetic...