Sharif Digital Repository

In this paper, we investigate an efficient deadlock-free shortest path routing algorithm for WK-recursive mesh networks which has been shown that possess several advantages like suitable to be manufactured by VLSI technology and easy to be expanded. It will be shown that the proposed algorithm requires O(√n) routing steps (where N is the network size) to route the entire network by exploiting either the self-routing or second order routing scheme. © Springer-Verlag Berlin Heidelberg 2008  

Accurate estimation of the capacity curve of offshore jacket structures to achieve performance levels and ductility is of great importance. Proper modeling of compressive members to correctly investigate global and local buckling is crucial in estimation of the capacity curve. Buckling modes and deformations due to local buckling can be considered, if the compressive braces are modeled by shell or solid elements. The purpose of this paper is to achieve the correct compressive behavior of braces with solid type elements and investigate the effects of five different parameters such as D/t, L/D, mesh size, mesh size ratio, and imperfections. ABAQUS FE software is used for this purpose. The... 

Accurate estimation of the capacity curve of offshore jacket structures to achieve performance levels and ductility is of great importance. Proper modeling of compressive members to correctly investigate global and local buckling is crucial in estimation of the capacity curve. Buckling modes and deformations due to local buckling can be considered, if the compressive braces are modeled by shell or solid elements. The purpose of this paper is to achieve the correct compressive behavior of braces with solid type elements and investigate the effects of five different parameters such as D/t, L/D, mesh size, mesh size ratio, and imperfections. ABAQUS FE software is used for this purpose. The... 

Seven half-scale reinforced concrete (RC) columns with supporting beam were experimentally studied under combined axial and lateral cyclic loading. The specimens were categorized in two groups based on reinforcement ratios. Three specimens were strengthened with carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) sheets. Other specimens were strengthened using a high strength mortar reinforced with textile mesh (textile reinforced concrete (TRC)). Strengthening of specimens were carried out using a vertical layer and a horizontal layer of FRP sheet or two vertical and two horizontal layers of textile meshes for TRC specimens. Since the weight of each layer of... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

Accurate estimation of the capacity curve of offshore jacket structures to achieve performance levels and ductility is of great importance. Proper modeling of compressive members to correctly investigate global and local buckling is crucial in estimation of the capacity curve. Buckling modes and deformations due to local buckling can be considered, if the compressive braces are modeled by shell or solid elements. The purpose of this paper is to achieve the correct compressive behavior of braces with solid type elements and investigate the effects of five different parameters such as D/t, L/D, mesh size, mesh size ratio, and imperfections. ABAQUS FE software is used for this purpose. The... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

A novel technique for upscaling of detailed geological reservoir descriptions is presented. The technique aims at reducing both numerical dispersion and homogenization error, generated due to incorporating a coarse computational grid and assigning effective permeability to coarse grid blocks respectively. In particular we consider implicit-pressure explicit-saturation (IMPES) scheme where homogenization error impacts the accuracy of the coarse grid solution of the pressure equation. To reduce the homogenization error, we employ the new vorticity-based gridding that generates a non-uniform coarse grid with high resolution at high vorticity zones. In addition, to control numerical dispersion,... 

In this paper, the data transfer operators are developed in three-dimensional elasto-plasticity using the Superconvergent Patch Recovery (SPR) method. The transfer operators are defined for mapping of the state and internal variables between different meshes. The internal variables are transferred from Gauss points of old mesh to the nodal points. The variables are then transferred from the nodal points of old mesh to the nodal points of new mesh. Finally, the values are computed at the Gauss points of new mesh using their values at the nodal points. Aspects of the transfer operators are presented in a three-dimensional superconvergent path recovery technique, based on C0, C1 and C2... 

Fractional-pixel accuracy Motion Estimation (ME) has been shown to result in higher quality reconstructed image sequences in hybrid video coding systems. However, the higher quality is achieved by notably increased Motion Field (MF) bitrate and more complex computations. In this paper, new half-pixel block matching ME algorithms are proposed to improve the rate-distortion characteristics of low bitrate video communications. The proposed methods tend to decrease the required video bandwidth, while improving the motion compensation quality. The key idea is to put a deeper focus on the search origin of the ME process, based on center-bias characteristics of low bitrate video MFs. To employ the... 

The present work describes the preparation and electrochemical characterization of RuO2/MWCNT/Stainless Steel Mesh (SSM) electrode as compared with a MWCNT/SSM electrode in the positive half-cell of a Vanadium Redox Flow Battery (VRFB). The electrochemical characterization of prepared electrode was carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The electrochemical activity of MWCNT/SSM modified with RuO2 as positive electrode in a VRFB was notably improved. The RuO2-included electrodes demonstrated high peak current ratio, small peak potential difference and high electron... 

We report the effect of the geometric parameters on transparency and conductivity in a metallic nanowire mesh as a transparent electrode. Today, indium tin oxide and fluorine-doped tin oxide are used as the transparent electrode for displays and solar cells. Still, there is a definite need for their replacement due to drawbacks such as brittleness, scarcity, and adverse environmental effects. Metallic nanowire mesh is likely the best replacement option, but the main issue is how to find the optimal structure and how to get the best performance. Since the interaction of light with nanowire mesh is complicated, there is no straightforward rule with a simple analytical solution. We developed a... 

The process of coarsening the detailed geological model of a reservoir to simulation models is known as upscaling. There are two fundamental steps in the procedure of upscaling, i.e., defining the coarse grid geometry and calculating the average properties for the generated coarse grid. In this paper, the focus will be on investigating the applicability of optimization in the context of coarse grid geometry definition. To do so, different objective function candidates will be defined, and their behavior in terms of predicting the two-phase flow accuracy of coarse grids will be analyzed to determine the proper objective function. A modified objective function employing the idea of analytical... 

This paper presents the results of an experimental work in order to evaluate the performance of a novel proposed retrofitting technique on a typical dome-roof adobe building by shaking table tests. For this purpose, two specimens, scaled 2:3, were subjected to a total of nine shaking table tests. The unretrofitted specimen, constructed by common practice, is designed to evaluate seismic performance and vulnerability of dome-roof adobe houses. The retrofitted specimen, exactly duplicating the first specimen, is retrofitted based on the results obtained from unretrofitted specimen tests, and the improvement in seismic behavior of the structure is investigated. Zarand earthquake (2005) Chatrood... 

Hydraulic fracturing (HF) of underground formations has widely been used in different fields of engineering. Despite the technological advances in techniques of in situ HF, the industry uses semi-analytical tools to design HF treatment. This is due to the complex interaction among various mechanisms involved in this process, so that for thorough simulations of HF operations a fully coupled numerical model is required. In this study, using element-free Galerkin (EFG) mesh-less method, a new formulation for numerical modeling of hydraulic fracture propagation in porous media is developed. This numerical approach, which is based on the simultaneous solution of equilibrium and continuity... 

Superhydrophobic surfaces demonstrate significant characteristics which make them suitable for a wide variety of applications. In this study, we propose a facile, one-step, and cost-effective anodizing scheme using aluminum nitrate/stearic acid mixture solution to create a superhydrophobic surface on an aluminum mesh. The surface outperforms the surface anodized by the widely used oxalic acid solution in terms of superhydrophobicity and water-surface friction behavior. The proposed surface reduced the friction by 11% on average respective to the surface prepared by oxalic acid. The durability of the introduced superhydrophobic surface has also been investigated. The proposed surface retained... 

Coping with the intrinsic limitations of electrical networks-on-chip, optical on-chip interconnect is emerged as a promising paradigm for future high performance multi-core designs. However, optical networks-on-chip (ONoCs) are drastically vulnerable to on-chip thermal fluctuation. Specifically, electrical power consumed by processing cores induces temperature drift, which may cause false paths for optical data communication through the network. Therefore, customizing electrical power distribution throughout the chip plays a critical role for reliable data communication in ONoCs. On the other hand, chip-scale distribution of electrical power is directly affected by mapping various... 

Most of clustered models in wireless sensor networks use a double-layered structure. In these structures a node is considered as cluster-head and has the responsibility of gathering information of environment. Static attribute is the main disadvantage of these clustering method. because as traffic rises in environment as time passes, cluster-head nodes energy and its close nodes, is consumed rapidly and so these nodes that has important role in data gathering, are break down. This issue is considered as age decrease in network life time and finally, network death. In this paper, a new three-layered dynamic model is introduced that its main goal is to increase network life time. The dynamic...