Sharif Digital Repository

In this paper, a diverse range of routing algorithms is classified into a new family of routings called zone-ordered label-based routing algorithms. The proposed classification is based on three common steps (factors) for generating such routings, namely, graph labeling, deadlock-free zones, and zone ordering. The main goal of this classification is to define several new routing concepts and streamline the knowledge on routing algorithms. Following the classification, a novel methodology is proposed to generate routing algorithms for irregular networks. The methodology uses the three mentioned steps to generate deadlock-free routings. Consequently, the methodology-based routings fall into... 

Using whole cell as a catalyst of enzymatic transesterification is a method to produce biodiesel with fewer drawbacks and at a lower cost. In the present study, biodiesel was produced by the reaction of waste frying oil with methanol in the presence of Rhizopus oryzae PTCC 5174 in both immobilized and free forms. Effect of four influencing factors including temperature, methanol to oil molar ratio, amount of biomass, and shaking speed was investigated. Response surface methodology was used to find the optimum conditions of the transesterification reaction. Each factor was set at three levels and the yield of the biodiesel was considered as the response. A quadratic equation was well-fitted... 

In this research the application of design of experiment (DOE) coupled with the artificial neural networks (ANN) in kinetic study of oxidative dehydrogenation of propane (ODHP) over a vanadium-graphene catalyst at 400-500 °C and a method of data collection/fitting for the experiments were presented. The proposed reaction network composed of consecutive and simultaneous reactions with kinetics expressed by simple power law equations involving a total of 20 unknown parameters (10 reaction orders and 5 rate constants each expressed in terms of a pre-exponential factors and activation energies) determined through non-linear regression analysis. Because of the complex nature of the system, neural... 

In this work, the electrophoretic deposition method was utilized to immobilize TiO2 particles on stainless steel substrates. In addition, for the first time, statistics-based experimental design using response surface methodology was employed to investigate the effect of four key coating parameters (i.e. applied voltage, calcination temperature, photocatalyst weight percentage, and deposition time) on the photocatalytic degradation. Analysis of variance revealed that the proposed model was adequate. X-ray diffraction and scanning electron microscope were used to evaluate the effects of the parameters on degradation efficiency. The optimum applied voltage, calcination temperature, catalyst... 

In salting-out liquid-liquid extraction (SALLE) technique, water-miscible organic solvents are used for extraction of polar analytes from saline solutions. In this study, for the first time, a coupled 1-mL syringes system was utilized to perform a miniaturized SALLE method. Sulfanilamide antibiotic was extracted and determined via the developed method followed by high performance liquid chromatography-ultraviolet detection (HPLC-UV). The extraction process was carried out by rapid shooting of acetonitrile as extraction solvent (syringe B) into saline aqueous sample solution (syringe A), and then the shooting was repeated several times at a rate of 1 cycle s-1. Thereby, an extremely large... 

Biodiesel as an alternative fuel for fossil diesel has many benefits such as reducing regulated air pollutants emissions, reducing greenhouse gases emissions, being renewable, biodegradable and non-toxic. In this study, used frying oil was applied as a low cost feedstock for biodiesel production by alkali-catalyzed transesterification. The design of experiments was performed using a double 5-level-4-factor central composite design coupled with response surface methodology in order to study the effect of factors on the yield of biodiesel and optimizing the reaction conditions. The factors studied were: reaction temperature, molar ratio of methanol to oil, catalyst concentration, reaction time... 

Purpose - This paper aims to present the design and implementation of VirSense, a novel six-DOF haptic interface system, with an emphasis on its gravity compensation and fixed-base motors. Design/methodology/approach - In this paper, the design and manufacture of the VirSense robot and its comparison with the existing haptic devices are presented. The kinematic analysis of the robot, design of the components, and manufacturing of the robot are explained as well. Findings - The proposed system is employed to generate a Virtual Sense (VirSense) with fixed-base motors and a spring compensation system for counterbalancing the torques generated by the weight of the links. The fixed bases of the... 

In this study, biodegradation of corn starch/glycerol/Na-MMT nanocomposites by soil burial tests were carried out for up to 6 months. Films were prepared by casting method according to central composite design and response surface methodology was applied for analysis of the results. The effects of formulation on the water solubility, contact angle and tensile strength of starch films were investigated. Increasing in Na-MMT content decreased biodegradability; while presence of glycerol, increased it. The effect of nanoparticles content might have been attributed to interactions between starch and Na-MMT that further prevented enzymatic attack on the biopolymer. In addition, the films with... 

Membrane nanotubes, ubiquitous in cellular systems, adopt a spectrum of curvatures and shapes that are dictated by their intrinsic physical characteristics as well as their interactions with the local cellular environment. A high bending flexibility is needed in the crowded cytoplasm where tubes often need to bend significantly in the axial direction at sub-micron length scales. We find the stiffness of spontaneously formed membrane nanotubes by measuring the persistence length of reconstituted membrane nanotubes freely suspended in solution and imaged by fluorescence microscopy. By quantifying the tube diameter we demonstrate for the first time that the persistence length scales linearly... 

The optimal design of complex systems in engineering requires pursuing rigorous mathematical modeling of the system's behavior as a function of a set of design variables to achieve goal-oriented design. Despite the success of current knee implants, the limited life span remains the main concern of this complex system. The mismatch between the properties of engineered biomaterials and those of biological materials leads to insufficient bonding with bone, stress shielding effects and wear problems (i.e. aseptic loosening). The use of a functionally graded material (FGM) for the femoral component of knee implants is attractive because the properties can be designed to vary in a certain pattern... 

Synchronization behavior of electroencephalographic (EEG) signals is important for decoding information processing in the human brain. Modern multichannel EEG allows a transition from traditional measurements of synchronization in pairs of EEG signals to whole-brain synchronization maps. The latter can be based on bivariate measures (BM) via averaging over pair-wise values or, alternatively, on multivariate measures (MM), which directly ascribe a single value to the synchronization in a group. In order to compare BM versus MM, we applied nine different estimators to simulated multivariate time series with known parameters and to real EEGs. We found widespread correlations between BM and MM,... 

Optimization of operational conditions for the preparation of Ultrahigh-molecular-weight polyethylene (UHMWPE)/Graphene nanocomposites with Ziegler-Natta catalyst was carried out via response surface methodology (RSM). This study deals with the optimization of process variables to optimize the productivity and molecular weight. A three-factor, three-level Box-Behnken design with temperature (X1), monomer pressure (X2), and [Al]/[Ti] molar ratio (X3) as the independent variables were selected for the study. The dependent variables were productivity and molecular weights of the final nanocomposites. It was developed by using the three parameters at three levels including 50, 60, and 70°C for... 

Enhancing the quality of the product has always been one considerable concern of production process management, and this subject gave way to implementing so many methods including robust design. In this paper, robust design utilizes response surface methodology (RSM) considering the mean and variance of the response variable regarding system design, parameter design, and tolerance design. In this paper, customer requirements and robust design are regarded simultaneously to achieve enriched quality. Subsequently, with a non-linear programming, a novel method for integrating RSM and quality function deployment has been proposed to achieve robustness in design. The customer requirements are... 

In economic design of profiles, parameters of a profile are determined such that the total implementation cost is minimized. These parameters consist of the number of set points, n, the interval between two successive sampling, h, and the parameters of a control chart used for monitoring. In this paper, the Lorenzen-Vance cost function is extended to model the costs associated with implementing profiles. The in-control and the out-of-control average run lengths, ARL0 and ARL1, respectively, are used as two statistical measures to evaluate the statistical performances of the proposed model. A genetic algorithm (GA) is developed for solving both the economic and the economic-statistical... 

Adjusting control factors (independent variables) to achieve an optimal level of output (response variable) is usually required in many real-world manufacturing problems. Common optimization methods often begin with estimating the relationship between a response and independent variables. Among these techniques, response surface methodology (RSM), due to its simplicity, has recently attracted extensive attention. However, on the one hand, in some cases, the relationship between a response and independent variables is too complex to be estimated using polynomial regression models. On the other hand, solving the obtained optimization model is not easy by exact methods. This paper introduces a... 

This paper reviews the main concepts of experimental design applicable to the optimization of analytical chemistry techniques. The critical steps and tools for screening, including Plackett-Burman, factorial and fractional factorial designs, and response surface methodology such as central composite, Box-Behnken, and Doehlert designs, are discussed. Some useful routines are also presented for performing the procedures  

This paper reports on design and measurement results of a state of the art low-noise and high-gain transimpedance amplifier (TIA) implemented in 0.18 μm TSMC CMOS technology. Thorough design methodology for high gain and low power TIA design for 2.5 Gb/s optical communication circuits family is presented. A noiseless capacitive feedback is proposed and implemented as a noise efficient feedback network for TIA circuits. Besides, analytical noise calculations in this family of TIA circuits are presented and optimum noise criteria are derived. The saturation and instability problem of TIA circuits resulted from DC dark current of the input photodiodes (PDs) is addressed and a circuit level... 

Purpose: The purpose of this paper is to apply a hybrid neuro-fuzzy paradigm called self-organizing neuro-fuzzy multilayered classifier (SONeFMUC) to classify the operating faults of a hydraulic system. The main motivation behind the use of SONeFMUC is to attest the capabilities of neuro-fuzzy classifier for handling the difficulties associated with fault diagnosis of hydraulic circuits. Design/methodology/approach: In the proposed methodology, first, the neuro-fuzzy nodes at each layer of the SONeFMUC are trained separately using two well-known bio-inspired algorithms, i.e. a semi deterministic method with random walks called co-variance matrix adaptation evolutionary strategy (CMA-ES) and... 

Ways to reduce an airline's cost has been studied for years. In fact, in order to achieve this goal, ones need to know different types of airline's costs including; fuel and oil, maintenance, Ticketing, passenger services, etc. and their impact on the total cost of an airline. According to announcement of ICAO [1], "maintenance cost (about 11% of total cost) is the second major cost after fuel and oil". Therefore, this may attract airline owners' attention to find ways to control maintenance cost and eventually the total cost of an airline. Though, there are many systematic approaches to analyze cost reduction and making policies, in this article, SD modeling is applied to develop a... 

A simple electrodeposition method is employed to construct a thin film modifier of palladium-gold nanoparticles (Pd-AuNPs) decorated multi-walled carbon nanotube (MWCNT) on the surface of glassy carbon electrode (GCE). Morphology and property of Pd-AuNPs-MWCNT have been examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Electrochemical performance of Pd-AuNPs-MWCNT/GCE for detection of ceftazidime (CFZ) has been investigated by cyclic voltammetry (CV). This nanostructured film modified electrode effectively exhibited enhanced properties for detection of ceftazidime (CFZ). The effects of various experimental variables such as, the amount of casted MWCNT,...