Sharif Digital Repository

Although Multi-Walled Carbon NanoTubes (MWCNTs) are found to influence the rheological behavior of drilling fluids, there are yet some controversies regarding their performance towards reducing formation damage induced by the invasion of water-based drilling fluids (WBFs). To address this important question, we synthesized novel nanocomposite materials via modifying the MWCNT via varying the proportion of carboxylated MWCNTs to PolyVinyl Alcohol (PVA). These nanocomposites were then used to make nano-based drilling-fluids (NDFs). The performance of the NDFs was evaluated by a set of rheological behavior tests, filtration experiments, and core-scale mud flow tests. To distinguish between the... 

In this paper, the effects of the multi-walled carbon nanotubes (MWCNTs) and nanographene (GP) on the mechanical performance of the cementitious mortars were investigated in different environments. Six mix designs were fabricated by considering the previous studies and exposed to potable water, acidic, and alkaline environments. The GP and MWCNTs partially replaced the cement with 0.25 %, 0.5 %, and 1 % of its weight. The standard mechanical tests, X-ray diffraction (XRD), and scanning electron microscope (SEM) analysis were performed on the specimens. The results indicated that including the MWCNTs and GP increases the compressive strength by 10 % and 20 % and similarly improves the tensile... 

Multi-walled carbon nanotubes (MWCNTs) are one of the preferred candidates for reinforcing polymeric nanobiocomposites, such as acrylic bone type of cement. In this study, at first, bulk samples of the reinforced polymethylmethacrylate (PMMA) matrix were prepared with 0.1, 0.25, and 0.5 wt per wt% of MWCNTs by the casting method. Tensile and three-point bending tests were performed to determine the essential mechanical properties of bone cement, such as tensile and bending strengths. The tensile fracture surfaces were investigated by scanning electron microscopy (SEM). The commercial software (Abaqus) was used to conduct finite element analysis (FEA) by constructing a representative volume... 

In this research study, interfacial assembled nanoporous zeolitic imidazolate framework (ZIF-8) multiwalled oxidized carbon nanotubes (MW-OCNTs) were developed and introduced into a silane coating. To analyze the destructive behavior of the nanoparticles exposed to salty solutions with three distinctive pHs of 2, 7.5, and 12, various types of tests such as X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and inductively coupled plasma (ICP) were accomplished. The XRD test revealed that the main characteristic peaks of ZIF-8 were eliminated and/or their intensity decreased. In accordance with the obtained data from the XRD test, nanoparticles at pH = 2 had been... 

Disposal of contaminated wastewater causes many serious problems especially when it gets mixed with the ground and seawater. It is, therefore, important to apply any remedial action to eradicate dangerous pollutants from the aqueous effluents and to avoid exposure of this wastewater to aquatic life. The research results discussed herein deal with the removal of Rhodamine B (RhB) and Congo Red (CR) dye from wastewater by using multi-walled carbon nanotubes (MWCNTs) as an adsorbent. Different factors like solid dosage, initial pH and concentration, time, and temperature were studied to understand the behavior and mechanism of adsorption. The maximum adsorption capacity in case of a single... 

In this work, single- and double-layer electromagnetic wave absorbers were prepared by as-prepared MWCNTs/BaTiO3/pitted carbonyl iron composites. MWCNT/BaTiO3 (MW/BTO) was prepared via sol-gel method whereas the carbonyl iron particles (CI) were corroded via pitting corrosion method. The structural, microstructural, magnetic and microwave absorption properties of the composites were evaluated via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA) methods. CST studio software was employed to simulate the microwave absorption characteristics of double-layer absorbers. Moreover, the effects of... 

In this article, the novel concept of using magnetic nanofluidic electrolyte for redox flow batteries is demonstrated for the first time. In this regard, the stable magnetic nanofluidic electrolytes are prepared by dispersing magnetic modified multiwalled carbon nanotubes (MMWCNTs) in the positive electrolyte of a polysulfide-iodide redox flow battery at mass concentrations of less than 0.3 g L−1. The electrochemical behavior of magnetic nanofluidic electrolyte was examined using cyclic voltammetry at different mass concentrations of MMWCNTs with a carbon felt electrode. Higher and stable peak current densities were observed at larger mass concentrations of MMWCNTs. A polysulfide-iodide... 

Convective heat transfer plays a significant role in numerous industrial cooling and heating applications. This method of heat transfer can be passively improved by reconfiguring flow passage, fluid thermophysical properties, or boundary conditions. The broader scope of nanotechnology introduced several studies of thermal engineering and heat transfer. Nano-fluids are one of such technology which can be thought of engineered colloidal fluids with nano-sized particles. In the present study, turbulent forced convection heat transfer to nanofluids in an axisymmetric abrupt expansion heat exchanger was investigated experimentally. During heat transfer investigation, the functionalized... 

Risperidone (RIS), one of the typical antipsychotics drugs, originally approved to be used for the mental illness treatment, especially schizophrenia, bipolar disorder, autism and major depression. In the present study, different carbon nanostructures including functionalized multi-walled carbon nanotubes (F-MWCNTs), carbon nanoparticles, nanodiamond-graphite and reduced graphene oxide were employed for modification of the surface of glassy carbon electrode (GCE) for ultrasensitive detection of RIS. The most significant increase in the anodic peak current of RIS was observed on F-MWCNTs-modified electrode (compared to the other modified electrodes and bare GCE). The influence of different... 

MWCNTs/Ag/TiO2NTs plates were synthesized via electrochemical reduction of functionalized multiwalled carbon nanotubes (MWCNTs) on Ag/TiO2NTs. The loading of silver nanoparticles was carried out by electroless reduction of Ag1+ onto TiO2 nanotubes previously formed by anodizing titanium. The SEM analysis revealed that MWCNTs were loaded significantly on the as-prepared Ag/TiO2NTs, where nanoparticles of Ag had grown on the walls of TiO2NTs. The photocatalytic activity of the synthesized plates was evaluated by the photodegradation of Methyl Orange (MO) dye under UV light irradiation. The results indicated that the MWCNTs/Ag/TiO2NTs demonstrated improved efficiency for MO photodegradation in... 

Two nanocatalysts of palladium over multi-walled carbon nanotubes (MWCNT) were synthesized and their catalytic properties evaluated in selective hydrogenation of acetylene. Different procedures were applied to synthesize catalysts which resulted in two distinct average particle sizes of palladium (Pd) over the MWCNT. The resulting catalysts displayed dissimilar NH3-TPD behaviors as well as different selectivity performances at lower temperatures. While enhancement of the hydrogen transfer mechanism occurred upon the temperature increase, similar behaviors for the aforementioned materials were obtained. Furthermore, it was revealed that the catalytic performance at higher temperatures did not... 

Low structure carbon black (CBN330), conductive high structure carbon black (CBXE2B) and carboxylated multiwalled carbon nanotube (MWCNT) were loaded into the blend of natural rubber (NR) and styrene butadiene rubber (SBR) at different contents up to 10 phr. Kraus plots showed that all the reinforcements interact with NR/SBR blend appropriately. However, the CBXE2B whose interfacial area is the highest showed greatest value of Kraus interaction parameter. Flory-Rhener model and effective torque value revealed that all of the reinforcements enhanced the crosslink density, among them CBXE2B showed the highest impact and MWCNT placed in the second rank. It was also shown that the cure kinetic... 

Poly(ethylene terephthalate) (PET) nanocomposites were prepared through a solution casting method using Multi wall carbon nanotubes (MWCNT) and organically modified montmorillonite (OMMT) as nanoparticles and their morphological and thermal properties investigated. The X-ray diffraction and transmission electron microscopy measurements showed that decreasing the ratio of MWCNT to OMMT for the same amount of OMMT creates better conditions for intercalation of PET macromolecules and promotes the transformation of OMMT nanostructures from the intercalated to exfoliated state. It was concluded that the Ozawa's model was not suitable to interpret the crystallization behavior of the... 

The electrochemical reduction of tinidazole (TNZ) is studied on gold-nanoparticle/carbon-nanotubes (AuNP/CNT) modified glassy carbon electrodes using the linear sweep voltammetry. An electrochemical procedure was used for the deposition of gold nanoparticles onto the carbon nanotube film pre-cast on a glassy carbon electrode surface. The resulting nanoparticles were characterized by scanning electron microscopy and cyclic voltammetry. The effect of the electrodeposition conditions, e.g., salt concentration and deposition time on the response of the electrode was studied. Also, the effect of experimental parameters, e.g., potential and time of accumulation, pH of the buffered solutions and... 

A modified glassy carbon electrode, prepared by potentiostatic electrodeposition of platinum-ruthenium nanoparticles (Pt-RuNPs) onto a multi-walled carbon nanotube (MWCNT) layer, offers dramatic improvements in the stability and sensitivity of voltammetric responses toward methyldopa (m-dopa) compared to glassy carbon electrodes individually coated with MWCNT or Pt-RuNPs. The surface morphology and nature of the hybrid film (Pt-RuNPs/MWCNT) deposited on glassy carbon electrodes was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. A remarkable enhancement in the microscopic area of the electrode together... 

Citric acid was polymerized onto the surface of functionalized multiwall carbon nanotubes (MWCNTCOOH) and MWCNT-graft-poly(citric acid) (MWCNTg-PCA) hybrid materials were obtained. Due to the grafted poly(citric acid) branches, MWCNT-g-PCA hybrid materials not only were soluble in water but also were able to trap water soluble metal ions. Reduction of trapped metal ions in the polymeric shell of MWCNT-g-PCA hybrid materials by reducing agents such as sodium borohydride led to encapsulated metal nanoparticles on the surface of MWCNT. Herein palladium nanoparticles were encapsulated and transported by MWCNT-g-PCA hybrid materials (MWCNT-g-PCA-EPN) and their application as nanocatalyst toward... 

In this review, the importance of nanoparticles (NPs), with emphasis on their general and specific properties, especially the high surface-to-volume ratio (A/V), in many technological and industrial applications is studied. Some physical and chemical preparation methods for growing several metallic and binary alloy NP catalysts are reviewed. The growth and mechanism of catalytic reactions for synthesis of 1D nanostructures such as ZnO nanowires and multiwall carbon nanotubes (MWCNTs) are discussed. Gas-phase production with emphasis on dependence of catalytic activity and selectivity on size, shape and structure of NPs is also investigated. Application of NP catalysts in several... 

In this work the effect of a conjugated macromolecule on the conformation of CNT was studied. Typically polyglycerol (PG) was covalently grafted onto the surface of multi-wall carbon nanotubes (MWCNTs) and MWCNT-graft-PG (MWCNT- g-PG) hybrid materials were obtained. Dynamic light scattering (DLS) experiments showed an average diameter around 100nm for MWCNT- g-PG hybrid materials in water. The difference between this size and the expected size for MWCNT- g-PG hybrid materials (the length of pristine MWCNTs was several micrometers) was assigned to the effect of the grafted PG on the conformation of MWCNT in the solution state. Transmission electron microscopy (TEM) evaluations showed a change... 

Hydrogen storage capacities of raw, oxidized, purified and Fe-doped multi-walled carbon nanotubes (MWCNTs) were studied by electrochemical method. Based on transmission electron microscopy and Raman spectroscopic data, thermal oxidation removed defective graphite shells at the outer walls of MWCNTs. The analysis results indicated that the acid treatment dissolved most of the catalysts and opened some tips of the MWCNTs. Thermal gravimetric analysis and differential scanning calorimetry results illustrated that by oxidation and purification of MWCNTs, the weight loss peak shifts toward a higher temperature. N2 adsorption isotherms of the purified and oxidized MWCNTs showed an increase in N2... 

There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. A new type of the modified electrodes is prepared in a layer-by-layer process by using multi-walled carbon nanotube (MWCNT) and poly-pyrrole. In this procedure, the glassy carbon electrode is casted by a drop suspension of MWCNT, which leads to form a thin film of nanotube on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNT pre-coated electrode. The modification procedure led to fabrication of a...