Sharif Digital Repository

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La... 

A tri-layered nanofibrous hydrogel thin film with temperature sensitivity is introduced as a new controlled drug release system to treat breast cancer. A simultaneous heat generation with the tunable release of dual drugs is observed in response to visible light radiation. A tri-layered nanofibrous sheet was fabricated through sequential electrospinning the blends of Au@Chit@DOX-loaded poly(N-isopropylacrylamide-co-N-methylol acrylamide) (poly (NIPAAm-co-NMA)) and Curcumin-loaded poly (vinyl alcohol) (Cu-loaded PVA), where the Cu-loaded PVA nanofibers (NFs) are sandwiched between two layers of Au@Chit@DOX-loaded poly (NIPAAm-co-NMA) NFs. After thermal crosslinking of the tri-layered... 

Polyvinylidene fluoride (PVDF) has special piezo/pyro/ferroelectric, flexibility, low weight, biocompatibility, economical, good chemical/thermal, and high mechanical properties, such as excellent nontoxic fiber/film formation. It has polar and nonpolar phases of α, β, γ, ε, and δ, in which the nonpolar α phase is the most stable one. However, the β phase is the best because it has good piezo/pyro/ferroelectric properties. Copolymers are attractive due to their low weight, nontoxic, chemical acid resistance, flexibility, and ease of processing. These aspects result in their applications in many fields. They are used for piezoelectric nanogenerators, cooling/heating sensors, electronic... 

Nanofiber layers have exciting properties such as fine fiber diameter, small pores, suitable connectivity between pores, high surface area and high porosity. These properties make nanofibers applicable for a variety of applications, such as high-performance filters and tissue engineering scaffolds. Different applications of electrospinning layers require different porosities. Therefore, it is very important to measure the porosity of nanofiber layers to express their application. To date, many methods have been expressed for this purpose, but all methods have disadvantages. Therefore, finding the best method is a challenge that will be addressed in this project. © 2022 The Author  

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of... 

TiO2 nanotubes (TNTs) were synthesized hydrothermally and modified by Cu2O using a sol-gel method to provide photocatalytic activity in visible light. Cellulose nanofiber (CNF)-based films were prepared by adding TiO2, TNTs, and Cu2O-modified TNT (TNT-Cu2O). The TiO2-based nanoparticles (TiO2, TNTs, and TNT-Cu2O) were uniformly distributed in the base polymer to make compatible and flexible films. The incorporation of nanoparticles significantly enhanced the UV-shielding properties of the film while slightly decreasing the transparency. Incorporating nanofillers improved the film's mechanical and water resistance properties depending on the nanoparticle type. The TNT-Cu2O-added CNF film... 

Myocardial infarction is a major cause of death worldwide and remains a social and healthcare burden. Injectable hydrogels with the ability to locally deliver drugs or cells to the damaged area can revolutionize the treatment of heart diseases. Herein, we formulate a thermo-responsive and injectable hydrogel based on conjugated chitosan/poloxamers for cardiac repair. To tailor the mechanical properties and electrical signal transmission, gold nanoparticles (AuNPs) with an average diameter of 50 nm were physically bonded to oxidized bacterial nanocellulose fibers (OBC) and added to the thermosensitive hydrogel at the ratio of 1% w/v. The prepared hydrogels have a porous structure with open... 

Here we report on the development of a hybrid nanofibrous scaffold made from polyvinylidene fluoride (PVDF) nanofibers embedding zinc oxide nanorods (ZnOns), and poly(ε-caprolactone) (PCL) nanofibers incorporating dexamethasone (DEX)-loaded chitosan nanoparticles using dual-electrospinning method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile analysis were carried out for physiochemical characterization of the scaffolds, followed by DEX release profile. In addition, an MTT assay was conducted to assess the viability of mouse bone marrow-derived mesenchymal stem cells (mBMSCs) on the hybrid nanofibrous scaffold.... 

Background: This research follows some investigations through neural tissue engineering, including fabrication, surface treatment, and evaluation of novel self-stimuli conductive biocompatible and degradable nanocomposite scaffolds. Methods: Gelatin as a biobased material and polyvinylidene fluoride (PVDF) as a mechanical, electrical, and piezoelectric improvement agent were co-electrospun. In addition, polyaniline/graphene (PAG) nanoparticles were synthesized and added to gelatin solutions in different percentages to induce electrical conductivity. After obtaining optimum PAG percentage, cold atmospheric plasma (CAP) treatment was applied over the best samples by different plasma variable... 

A series of UiO-66/polyaniline (UiO-66/PANI) nanohybrids with various UiO-66 to aniline weight ratios ranging from 0.01 to 0.1 was synthesized using an in situ polymerization technique. The adsorption behavior of the neat PANI nanofiber network and the synthesized nanohybrids was examined toward anionic methyl orange (MO) dye from aqueous media. It was realized that the maximum adsorption capacity of PANI (229 mg/g) increases steadily by increasing the UiO-66 content in the nanohybrid up to 7 wt % at 426 mg/g, and then, it approximately levels off at 432 mg/g for the nanohybrid sample containing 10 wt % UiO-66, that is, UP10. Based on a thorough characterization, it was shown that UiO-66 is... 

Plastic packaging is causing a serious environmental concern owing to its difficulty in degrading and micro-particulates' emissions. Developing biodegradable films has gained research attention to overcome ecological and health issues associated with plastic based packaging. One alternative substitute for petroleum-based plastic is nanocellulose based films, having distinguishing characteristics such as biodegradability, renewability, and non-toxicity. Nanocellulose is classified into three major types, i.e., cellulose nanofibril, cellulose nanocrystals, and bacterial nanocellulose. However, the scope of this review is limited to cellulose nanofibril (CNF) because this is the only one of... 

Unique physiochemical and biological properties of nanofibers along with the choice of a wide variety of materials for both fabrication and tunable release patterns make nanofibers an ideal option for drug delivery. Loading antibacterial agents into nanofibers has attracted great deal of attention. Whilst there are several studies focusing on applying new generations of antibacterial materials, antibiotics are still the gold standard in clinical applications. Therefore, we aimed at introducing antibiotic-loaded nanofiber substrates with potential for topical skin delivery applications, reduced consumption of antibiotics and increased storage time. We applied Amoxicillin (AMX) as a model drug... 

Electrospinning is a simple and cheap process for forming one-dimensional (1D) nanofibers with controllable size, morphology, and chemistry. Besides these, the ultrahigh surface area with industrialization capability has attracted extensive interest in the research community. On the other hand, a photocatalytic process is a promising method for degrading organic pollutants that cannot be removed by conventional wastewater treatment. This review focuses on the recent progress of electrospun nanofibers for the photocatalytic degradation of water pollutants. The linkage between the electrospinning technique and the photocatalytic process is classified into two main categories: (1) polymeric... 

Magnetic nanofiber cellulose (NFC) was selected as a biopolymer surface for the reaction with ferric metformin and a novel nanocatalyst was prepared. This green heterogeneous organometallic catalyst was analyzed by physiochemical techniques. The new metformin drug complex supported on magnetic NFC was used as a powerful and efficient catalyst for the synthesis of functionalized 4H-pyrans derivatives. The antimicrobial activity of the products showed excellent activity against all the bacterial and fungal strains (especially compounds 7q and 6r). © 2022 Taylor & Francis Group, LLC  

The core-shell nanofibers, produced by the coaxial electrospinning method, are good candidates for delivery of anticancer drugs due to their continuous release without initial burst release. In this work, the N-carboxymethyl chitosan (N-CMCS)-polyvinyl alcohol (PVA)/poly(ε-caprolactone) (PCL) composite and core-shell nanofibers were prepared by two-nozzle and coaxial electrospinning techniques, respectively. Doxorubicin (DOX) as an anticancer drug was loaded into the N-CMCS/PVA/PCL nanofibers fabricated by two-nozzle and coaxial electrospinning. The performance of nanofibers was compared for the adsorption and controlled release of DOX against MCF-7 breast cancer cells death in vitro. The... 

Fabrication of scaffolds with enhanced mechanical properties and desirable cellular compatibility is critical for numerous tissue engineering applications. This study was aimed at fabrication and characterization of a nanofiber skin substitute composed of collagen (Col)/sodium alginate (SA)/ polyethylene oxide (PEO)/Rhodotorula mucilaginosa sp. GUMS16 produced exopolysaccharides (EPS) were prepared using the biaxial electrospinning technique. This study used collagen extracted from the bovine tendon as a natural scaffold, sodium alginate as an absorber of excess wound fluids, and GUMS16 produced exopolysaccharides as an antioxidant. Collagen was characterized using FTIR and EDS analyses. The... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

In this work, the addition of a novel polyaniline (PANI)/silica (SiO2) nanostructure (PSn) in chitosan/polyvinyl alcohol nanofibers (CP) was evaluated to enhance the dye removal capacity of CP. Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) results confirmed the chemical grafting of SiO2 on PANI nanoparticles. Brunauer-Emmett-Teller (BET) results showed a specific surface area of 61 m2 g−1 for the PSn filled CP nanofiber (CP-PSn). FE-SEM and EDS-elemental mapping results showed the uniform dispersibility of PSn in CP nanofibers. After the addition of PSn into CP, the adsorption capacity of... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

A straightforward three-stage method was applied to fabricate a super-hydrophobic mixed-matrix nanofiber membrane using the electrospinning method for desalination purpose. First, a hydrothermal technique was applied to synthesize a super-hydrophobic nano-sheet, called octadecylamine-reduced graphene oxide (ODA-rGO) with a water contact angle of 162°, which was then added to PVDF-HFP dope solution. After, 0.005 wt% LiCl was added to the dope solution to decrease the mean pore size by increasing solution conductivity. Moreover, some membranes were hot-pressed to improve liquid entry pressure (LEP). Eventually, a top-quality nanofiber membrane was synthesized using 0.1 wt% ODA-rGO and 0.005...