Sharif Digital Repository

Purpose: The purpose of this paper is to investigate the natural convection behavior of nanofluids in an enclosure. The enclosure is a 3D capsule with curved boundaries filled with TiO2-water nanofluid. Design/methodology/approach: In this paper, a multiple relaxation times lattice Boltzmann method (MRT-LBM) has been used. Two-component LBM has been conducted to consider the interaction forces between nanoparticles and the base fluid. Findings: Results show that the enhanced Nusselt number (Nu*) increases with the increase in volume fraction of nanoparticles (ϕ) and Ra number and decrease of nanoparticle size (λ). Additionally, the findings indicate that increasing volume fraction beyond a... 

A new characteristic-based method is developed and used for solving the mixed and forced convection problems. The nano-fluid flow with heat transfer is simulated with a novel characteristic-based scheme in closed domains with different aspect ratios. For this purpose, a FORTRAN code has been written and developed. Water as a pure fluid and water-titanium dioxide as a nano-fluid were considered. The governing equations are solved by the finite volume utilizing a characteristic-based scheme for the convective fluxes. The simulation is done at Grashof numbers from 100 to 104, Reynolds numbers from 100 to 1000, and volume fractions of nano-particles from 0% to 10%. Streamlines, isotherms,... 

An extracting medium based on chitosan-polypyrrole (CS-PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS-PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS-PPy magnetic nanocomposite was compared with the CS-MNPs and Fe3O4 nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS-PPy magnetic... 

We report herein the development of a highly sensitive colorimetric method for detection of d-Penicillamine using citrate-capped gold nanoparticles (AuNPs). This assay relies upon the distance-dependent of gold nanoparticles surface plasmon resonance band of gold nanoparticles. By replacing the thiol-containing chelator drug, d-Penicillamine, with citrate on the gold nanoparticles surface, a new peak appearing at a longer wavelength intensifies and shifts further to the red from the original peak position due to aggregation of gold nanoparticles which depends on ionic strength, gold nanoparticles and d-Penicillamine concentration. During this process, the plasmon band at 521 nm decreases... 

Developments of sensitive, rapid, and cheap systems for identification of a wide range of biomolecules have been recognized as a critical need in the biology field. Here, we introduce a simple colorimetric sensor array for detection of biological thiols, based on aggregation of three types of surface engineered gold nanoparticles (AuNPs). The low-molecular-weight biological thiols show high affinity to the surface of AuNPs; this causes replacement of AuNPs' shells with thiol containing target molecules leading to the aggregation of the AuNPs through intermolecular electrostatic interaction or hydrogen-bonding. As a result of the predetermined aggregation, color and UV-vis spectra of AuNPs... 

High performance Fe-Gd-P tri-doped TiO2 nanoparticles (1 at% for each dopant) were successfully synthesized by a modified sol–gel method. Various analytical and spectroscopic techniques were carried out to determine the physicochemical properties of the prepared samples, including XRD, EDX, FESEM, BET, FTIR, XPS, PL, EIS and UV–Vis diffuse reflectance spectroscopy. The photocatalytic activities of prepared samples were evaluated by photo degradation of methyl orange (MO) and 4-chlorophenol (4-CP) as model pollutants under visible light irradiation. Effects of each dopant on different properties of TiO2 nanoparticles were investigated. Results show that Gd and P doping enhances TiO2 surface... 

In the current study, two series of antimicrobial dressings conjugated with silver sulfadiazine (SSD) and silver nanoparticles (AgNPs) were developed and evaluated for chronic wound healing. Highly porous polycaprolactone (PCL)/polyvinyl alcohol (PVA) nanofibers were loaded with different concentrations of SSD or AgNPs and compared comprehensively in vitro and in vivo. SSD and AgNPs indicated a strong and equal antimicrobial activity against S. aureus. However, SSD had more toxicity against fibroblast cells over one week in vitro culture. An in vivo model of wound healing on male Wistar rats was developed with a full thickness wound. All the wound dressings indicated enough flexibility and... 

In this work, we compared formation and properties of heat-treated Ag nanoparticles in silica matrix synthesized by RF- reactive magnetron cosputtering and sol-gel methods separately. The sol-gel and sputtered films were annealed at different temperatures in air and in a reduced environment, respectively. The optical UV-visible Spectrophotometry have shown that the absorption peak appears at 456 and 400 nm wavelength indicating formation of silver nanoparticles in SiO2 matrix for both the sol -gel and sputtering methods at 100 and 800 °C, respectively. XPS measurements showed that the metallic Ag0 nanoparticles can be obtained from both the techniques at these temperatures. According to XPS... 

The Sonogashira reaction using nickel ferrite nanoparticles as catalyst and under copper-free conditions was investigated in water as a green solvent. Various types of aryl and alkyl halides were successfully coupled with phenyl acetylene under the optimized reaction conditions with very good to excellent yields at a short time. The catalyst is easily recoverable and can be reused for several runs with a good turnover number  

We synthesized a titanium dioxide–polyaniline core–shell nanocomposite and implemented it as an efficient sorbent for the needle-trap extraction of some volatile organic compounds from urine samples. Polyaniline was synthesized, in the form of the emeraldine base, dissolved in dimethyl acetamide followed by diluting with water at pH 2.8, using the interfacial polymerization method. The TiO2 nanoparticles were encapsulated inside the conducting polymer shell, by adapting the in situ dispersing approach. The surface characteristics of the nanocomposite were investigated by Fourier transform infrared spectrometry, scanning electron microscopy, and transmission electron microscopy. After... 

Purpose. Drug release from nanosystems at the sites of either absorption or effect biophase is a major determinant of its biological action. Thus, in vitro drug release is of paramount importance in gaining insight for the systems performance in vivo. Methods. A novel in vitro in vivo correlation, IVIVC, model denoted as double reciprocal area method was presented and applied to 19 drugs from 55 nano formulations with total 336 data, gathered from literature. Results. The proposed model correlated the in vitro with in vivo parameters with overall error of 12.4 ± 3.9%. Also the trained version of the model predicted the test formulations with overall error of 15.8 ± 3.7% indicating the... 

Activated layered manganese oxides with deposited nano-sized gold or silver were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectrometry, atomic absorption spectroscopy and energy-dispersive X-ray mapping. Here, we report that Au or Ag nanoparticles deposited on layered Mn oxides improve the catalytic activity of the Mn oxides toward the epoxidation of olefins in the presence of H2O2 and NaHCO3  

In this study a low-width MoS2 ribbon has been used for probing the electronic structure and local magnetic moment near vacancies. A theoretical study with the full-potential Density Functional Theory (DFT) approach (Wien2K code) have shown that when the dimension of MoS2 is reduced from 2-D to 1-D the nonmagnetic semi-conductor MoS2 becomes a magnetic conductor. Our study has shown that a vacancy on the S-edge with 50% coverage intensifies the magnetization of the edge of the MoS2 nanoribbon but such a vacancy on S-edge with 100% coverage causes this magnetic property to disappear. It is concluded that in both of them, there are positive or negative strong gradients of local magnetic moment... 

This study focuses on developing an efficient material that integrates high adsorption performances of dye and antibiotics as well as effective oxidation activity of it. Herein, we report a facile method to synthesize polyresorcinol@CoFe2 O4 via a one-step hydrothermally route. The prepared composite possesses multifunctional performance for methylene blue (MB) and tetracycline (TC) removal with appropriate magnetic separation operation and significant removal ability with an adsorption capacity of 51.48 and 28.16 mg g–1, respectively. Meanwhile, the aforementioned composite exhibits a high oxidation activity toward MB and TC molecules where the adsorption capacity increases to 1,723 and 120... 

There is an eminent interest to improve the photoactivity of TiO 2 nanostructures via doping with midband gap donors or acceptors to achieve a high solar absorption. In the present work, Cr- and V-doped TiO 2 nanoparticles were prepared via a facile chemical vapor synthesis method. The effect of the transition metals (TM) on the solar light activity of the semiconductor nanoparticles as photocatalyst was examined by degradation of methylene blue and acid red 27. Induced coupled plasma and X-ray photoelectron spectroscopy analyses indicated high efficiency of the doping process in the hot wall reactor without surface covering of the TiO 2 nanoparticles by the dopants. Diffuse reflectance... 

The core-shell nanofibers, produced by the coaxial electrospinning method, are good candidates for delivery of anticancer drugs due to their continuous release without initial burst release. In this work, the N-carboxymethyl chitosan (N-CMCS)-polyvinyl alcohol (PVA)/poly(ε-caprolactone) (PCL) composite and core-shell nanofibers were prepared by two-nozzle and coaxial electrospinning techniques, respectively. Doxorubicin (DOX) as an anticancer drug was loaded into the N-CMCS/PVA/PCL nanofibers fabricated by two-nozzle and coaxial electrospinning. The performance of nanofibers was compared for the adsorption and controlled release of DOX against MCF-7 breast cancer cells death in vitro. The... 

In this study, copper oxide nano particles were synthesized by batchwise supercritical hydrothermal method. After preparation of CuO nano particles, they were immobilized into the porous matrix of sodium alginate. The drying process formed a very porous structure that is useful for enhancing of adsorption activity. Produced CuO particles were characterized by X-ray diffractometery (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and BET for measuring the surface area. The prepared materials were then used as adsorbent in the removal of toxic metal ions in aqueous solution. To optimize the adsorption system, the effect of various parameters such as adsorbent... 

Batch adsorption experiments were carried out for the removal of malachite green (MG) cationic dye from aqueous solution using novel hydrogel nanocomposite that was prepared by graft copolymerization of acrylic acid (AA) onto kappa-carrageenan (κC) biopolymer in the presence of a crosslinking agent, a free radical initiator and aminosilica-functionalized TiO2 nanoparticles (κC-g-PAA/TiO2-NH2). The factors influencing adsorption capacity of the adsorbents such as initial pH value (pH0) of the dye solutions, TiO2-NH2 content (wt%), initial concentration of the dye, amount of adsorbents, and temperature were investigated. The adsorption capacity of hydrogel nanocomposite for MG was compared... 

Understanding the adsorption dynamics of nanoparticles at solid-liquid interfaces is of paramount importance to engineer nanoparticles for a variety of applications. The nanoparticle surface chemistry is significant for controlling the adsorption dynamics. This study aimed to experimentally examine the adsorption of surface-modified round-shaped silica nanoparticles (with an average diameter of 12 nm), grafted with hydrophobic (propyl chains) and/or hydrophilic (polyethylene glycol chains) agents, at an aqueous solution-silica interface with spherical soda-lime glass beads (diameter of 3 mm) being used as adsorbents. While no measurable adsorption was observed for solely hydrophobic or... 

By a single-step supercritical hydrothermal synthesis method, yttrium oxide nanoparticles were successfully prepared without additional treatment. Yttrium oxide nanoparticles were employed as an adsorbent to study the adsorption of some heavy metal ions. This study revealed that nano structure yttrium oxide was an effective adsorbent for removal of lead ions from aqueous solutions