Sharif Digital Repository

In this study, spinel CuCo2O4 (CCO) with a hierarchical hollow sphere morphology was encapsulated in V2O5-decorated ultra-wrinkled graphitic carbon-nitride (VO-UCN) for the first time via a facile glycerol-assisted solvothermal method in the interest of developing a novel high-efficiency double Z-type nano-photocatalyst (denoted as VO-UCN@CCO). The remarkable physicochemical features of the as-prepared nano-photocatalysts were verified using diverse characterization techniques including TGA, XRD, FT-IR, FE-SEM, TEM, BET, UV–vis DRS, PL, EIS, and transient photocurrent techniques. Herein, VO-UCN@CCO nanocomposite was employed for the photodisintegration of levofloxacin (LVOF) antibiotic under... 

Crystalline anatase TiO2 nanoparticles were synthesized in the gas phase using an H2O-assisted atmospheric-pressure CVS process. Simultaneous oxidation/hydrolysis of TiCl4 in the H2O-assisted APCVS process demonstrates the feasibility of facile fabrication and the designed synthesis of TiO2 nanoparticles in atmospheric pressure. Kinetics and thermodynamics studies of TiCl4 reactions in the gas phase illustrated oxidation or hydrolysis domination theoretically and were confirmed by experimental runs. Effects of H2O/O2 ratio on the reactions mechanisms, phase formation, size characteristics, morphology, and purity of TiO2 nanoparticles were experimentally studied using various analytical... 

SiBNC nanofibers were synthesized through the polymeric route by a one-pot synthesis approach. DMTA (dichloroboryl methyl trichlorosilyl amine) polymer was selected as pre-ceramic for SiBNC, which was shaped into nanofibers by electrospinning. Then, the nanofibers were cured in an inert atmosphere in order to obtain the final ceramic. By changing the curing atmosphere, the compound of final ceramic has been manipulated. In addition, the ceramic yield of DMTA as a preceramic was increased in the nitrogen atmosphere. The effects of applied voltage, solution concentration, and feeding rate on the morphology of final electrospun ceramic nanofibers were also investigated. Final ceramic remains... 

Recently, aluminum titanate (Al2TiO5)-based nanostructures have been proved to serve as an efficient photocatalytic material with satisfactory photodegradation capacity. In this study, the citrate sol–gel method was used to synthesize these nanostructures and inspect the significant impacts of nitrogen-doping-originated crystalline defects on their photocatalytic performance in some details for the first time. The results indicated that the penetration of nitrogen atoms into AT crystal lattice, depending on the nitriding time and temperature, can induce a great deal of the residual stress and result in propagating the existing cracks and breaking down the particles. The XPS and FTIR results... 

Massive amounts of spent lead-acid battery separators with 50 wt % silica nanoparticles (SiNPs) can be recycled for further use. One compelling application is form-stable phase change materials (FSPCMs). This study proposes a novel tertiary eutectic mixture of green and non-toxic lauric acid, palmitic acid, and paraffin, and recycled SiNPs to find a sustainable approach to deal with industrial wastes and energy consumption. Fatty acids and paraffin are promising for thermal energy storage in buildings. However, they lack sufficient thermal conductivity, mechanical strength, and suffer from leakage. To give mechanical strength, high-density polyethylene (HDPE) was added and sintered.... 

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired... 

The paper aims at understanding solidification phenomena and solid state precipitations during dissimilar transient liquid phase bonding of γ-TiAl intermetallic compound to IN718 Ni-based superalloy using a quinary Ni–7Cr–3Fe–4.5Si–3.2B (wt%) filler metal. The mechanisms of intermetallic formation via solidification and solid state reactions are discussed. The joint is featured by the formation of Ni-rich solid solution in an isothermal solidification zone near to IN718, Ni-rich solid solution and isostructural binary phases solid solution designated as Al1-xNi3Six in an isothermal solidification zone near to TiAl, boride/silicide and boro-silicide formation during binary and ternary... 

Herein, a novel type of multifunctional magnetic nanoparticles with dual thermal and pH-responsive behavior was fabricated as the carrier for delivery of doxorubicin (DOX). Fe3O4@SiO2 magnetic nanoparticles, were grafted with polymer brushes consisting of poly (NIPAM-co-GMA) (PNG) chains via surface initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization. The polymer brushes were then modified with hydrazine groups as DOX binding sites. The prepared multifunctional magnetic nanoparticles were characterized by FT-IR, 1H NMR, XPS, TGA, DLS, VSM, GPC, TEM, and XRD analysis. The in vitro drug release of the multifunctional magnetic nanoparticles was examined at 37 °C... 

The supernatant obtained from the extracellular laccase produced by Phanerochaete chrysosporium was used as the enzyme source to conduct a partial purification, characterization and dye decolorization study. The partially purified enzyme was stable in the pH range of 3–5 and showed an optimum activity at pH 4.0, using guaiacol as a substrate. Laccase stability of pH was determined and discovered to retain 100% of its activity at a pH of 4.0 after 2 h. The maximum enzyme activity was obtained between 30 and 50 °C. The maximum velocity and Michaelis constant were calculated as 3.171 µM−1·min and 1628.23 µM, respectively. The enzyme was activated by Fe2+, Zn2+, Ca2+ and Cu2+, while Hg2+, Mn2+,... 

The current paper reports the deposition of sulfur micro-particles using sulfur vapor deposition (SVD). Sulfur particles in size of 5 to 45 μm were deposited on a stainless steel substrate to be used as the cathode with porous structure in lithium sulfur (Li-S) batteries. Mass loading of about 0.5 mg cm-2 was obtained from this pure sulfur cathode. The structure of this binder-free cathode was characterized by field emission scanning electron microscopy (FESEM), x-ray spectroscopy (EDS), and x-ray diffraction (XRD). The electrochemical performance of the battery with two different organic liquid ether- and carbonate-based electrolytes was investigated and the results demonstrated that the... 

Although morphological disorder of nanotube structure is further down than the nanoparticular electrode, its density of traps are the hindering effects in the charge transport. In this study, crack-free TiO2 nanotube membranes, which obtained through a re-anodizing process, are fixed on transparent fluorine–tin-oxide glass by applying a few drops of Titanium Isopropoxide without needing the TiO2 powder paste. Front-side illuminated dye sensitized solar cells fabricated by undoped, N-doped and blue TiO2 nanotube membranes are investigated. The electrical characteristics of TiO2 nanotube based dye sensitized solar cells are followed by theoretical analysis using simple one-diode model.... 

Highly porous nanocomposites of graphitic-carbon nitride and tin oxide (g-C3N4/SnO2) were prepared through simple pyrolysis of urea molecules under microwave irradiation. The initial amount of tin was varied in order to investigate the effect of SnO2 content on preparation and properties of the composites. The synthesized nanocomposites were well-characterized by XRD, FE-SEM, HR-TEM, BET, FTIR, XPS, DRS, and PL. A homogeneous distribution of SnO2 nanoparticles with the size of less than 10 nm on the porous C3N4 sheets could be obtained, suggesting that in-situ synthesis of SnO2 nanoparticles was responsible for the formation of g-C3N4. The process likely occurred by the aid of the large... 

In the present work, mesoporous nitrogen-doped carbon nanotubes (N-CNTs) were synthesized by using a low-cost and unique set of precursors (camphor and urea). The CVD method at 1000 °C was used with different camphor/urea ratios, and Co-Mo/MgO nanocatalyst was utilized as growth catalyst. Application of mesoporous N-CNTs in selective oxidation of H2S was studied experimentally and N-CNTs interactions with H2S was also investigated using DFT calculations. The as-synthesized N-CNTs were characterized using FTIR, FE-SEM, elemental analysis, X-ray diffraction (XRD), XPS and nitrogen adsorption/desorption. The N-CNT2 sample with urea to camphor ratio (U/C) of 1 showed the highest sulfur yield at... 

Two new macrocyclic ligands containing 17- and 19-membered O2N3-donor aza-crowns anchored to [60]Fullerene were synthesized and characterized by employing HPLC, electrospray ionization mass (ESI-MS), 1H and 13C NMR, UV–vis, IR spectroscopies, as well as powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA) in solid state. TGA measurements revealed that upon linking each of these macrocycle rings to [60]Fullerene, the decomposition point measured for [60]Fullerene moiety was increased, indicating on the promoted stability of [60]Fullerene backbone during binding to these macrocyclic ligands. Moreover, the ground state non-covalent interactions of [60]Fullerene derivatives of... 

The preparation of two new azulene-based imine ligands N-(2,6-diisopropylphenyl)-6-tBu-1-azulenylmethaneimine, 3, and N-(2,6-diisopropylphenyl)-6-tBu-3-(2,6-diisopropylphenyliminomethyl)-1-azulenylmethaneimine, 4, is described. These imine ligands display stimuli responsive emissive behavior and their fluorescence can be switched on and off by protonation and neutralization with trifluoroacetic acid and trimethylamine, respectively. The cyclometalation of the monoimine ligand by platinum gave the cyclometalated complex [PtMe(SMe2)(3′)], 5, (where the prime denotes the cyclometalated ligand 3). The reaction of 5 with TlPF6 yields the trinuclear bent Pt2Tl complex {[PtMe(SMe2)(3′)]2(μ-Tl)}PF6,... 

Molybdenum(VI)–oxodiperoxo complex containing an oxazine ligand, ([MoO(O2)2(phox)], phox: 2-(2′-hydroxyphenyl)-5,6-dihydro-1,3-oxazine) was conveniently synthesized and immobilized onto chloro-functionalized mesoporous silica SBA-15 by covalent bonding between the chloropropyl group on the internal surface of the pores and the nitrogen atom of oxazine ligand yielding [MoO(O2)2(phox)]/SBA-15. The resulting material was characterized by FT-IR, TGA, XRD, SEM, TEM, EDX, ICP-AES, BET and UV–vis spectroscopy. The heterogeneous catalyst [MoO(O2)2(phox)]/SBA-15 was employed in the epoxidation of alkenes, exhibiting high catalytic performance and selectivity for epoxide similar to that of homogeneous... 

Perovskite solar cells have been constructed under ambient conditions by using 2,2',7,7'-Tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) mixed with a small quantity of soluble tetra-n-butyl substituted copper phthalocyanine as hole transporting material. The introduction of the phthalocyanine derivative resulted in an impressive increase of cell efficiency, which changed from 10.4% in the absence to 15.4% in the presence of phthalocyanine. This effect is related to the creation of deep traps in the hole transporting phase which block back-travelling electrons as well as to the improvement of the structural quality of the spiro-OMeTAD film in the presence of... 

Perovskite solar cells have been constructed under the standard procedure by employing soluble tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material. Solution processed device construction was carried out under ambient conditions of 50–60% ambient humidity. Triphenylamine substitution played the double role of imparting solubility to the core metal phthalocyanine as well as to introduce electron-rich ligands, which could enhance the role of Zn phthalocyanine as hole transporter. Indeed, the obtained material was functional. The present data highlight tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material but also highlight the importance of... 

Readily prepared copper nanoparticles supported on CeO2 have been found to effectively catalyse the 1,3-dipolar cycloaddition (CuAAC) of a variety terminal alkynes and organic azides generated in situ from sodium azide and different organic halides furnishing the corresponding 1,2,3-triazoles in excellent yields. Cu nanoparticles supported on CeO2 have been characterized by X-ray diffraction analysis, energy dispersive X-ray analysis, scanning electron microscope and transmission electron microscope. The salient features of the present protocol are shorter reaction time, mild reaction conditions, reusability of the catalyst, and applicability to a wide range of substrates. © 2016 Elsevier... 

Perovskite solar cells have been constructed under ambient conditions by using 2,2',7,7'-Tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) mixed with a small quantity of soluble tetra-n-butyl substituted copper phthalocyanine as hole transporting material. The introduction of the phthalocyanine derivative resulted in an impressive increase of cell efficiency, which changed from 10.4% in the absence to 15.4% in the presence of phthalocyanine. This effect is related to the creation of deep traps in the hole transporting phase which block back-travelling electrons as well as to the improvement of the structural quality of the spiro-OMeTAD film in the presence of...