Search for: numerical-methods
0.02 seconds
Total 873 records

    Determination of Forming Limit Diagram with Existence of Normal Stress and Investigation on the Methods of Calibration in this Diagram

    , M.Sc. Thesis Sharif University of Technology Khakpour Nejad Khaki, Hamid (Author) ; Assempour, Ahmad (Supervisor)
    Theoretical studies in the analysis of sheet metal failures are referred to obtain the Forming Limit Diagrams (FLDs). Since extracting the Forming Limit Diagrams experimentally is cost and time consuming, many researches have been accomplished for obtaining these diagrams theoretically. However, in many of these researches, the assumption of plane stress state has been used to obtain the FLD, which is not correct in some processes such as hydroforming because of high level of normal stress. In this study, determination of the forming limit diagram with existence of the normal stress is based on the Marciniak and Kuczynski model. Newton-Raphson method has been used to find the set of... 

    Scattering from Objects in Presence of Rough Surfaces

    , M.Sc. Thesis Sharif University of Technology Masoumi, Amir Reza (Author) ; Shishegar, Amir Ahmad (Supervisor) ; Rejaei, Behzad (Co-Advisor)
    Electromagnetic wave scattering from objects is one of the most important problems in applied electromagnetics. Usually the electromagnetic scattering characteristic from an object is analyzed with the assumption that the object is in free space. If the object is not near other objects or surfaces this is acceptable. However if the object is near other objects or surfaces then the interactions between the scattered wave from the object and surroundings can significantly alter the scattering characteristic from the object.In this thesis we have proposed a method for the analysis of electromagnetic scattering from an object in the presence of rough surfaces. This method is based on the... 

    Development of a Finite Volume Numerical Method by Overlapping Grids

    , M.Sc. Thesis Sharif University of Technology Masoudi, Ali (Author) ; Seif, Mohammad Saeed (Supervisor) ; Nouri Borujerdi, Ali (Supervisor)
    A finite volume algorithm to assess hydrodynamic aspects of a rigid and up to three degrees of freedom marine structure in the context of transient two-phase flow o viscous incompressible fluids is presented. Different components of the algorithm are selected just after a complete review of all probable choices. Using a collocated arrangement to save data, a fractional step method is applied to satisfy Navier-Stokes and continuity equations, as an appropriate choice in transient flows. Also, a volume fraction transport equation is solved to capture large and complex deformations of the interface between two phases. So, an effective fluid is introduced by combining two immiscible phases in... 

    Investigation on Improving Direct Discrete Method and its Application in Adjoint Diffusion Equation Numerical Solvers

    , M.Sc. Thesis Sharif University of Technology Ayyoub Zadeh, Mohsen (Author) ; Vosoughi, Naser (Supervisor)
    Numerical analysis method improvement is a topic of interest among all engineering disciplines. Regarding the fact that our ability to predict the behavior of a physical system is often limited by our computational resources, the efficiency of the employed numerical method is an important factor in the degree of approximation used in modeling. One of the recent numerical methods is the Cell Method (CM), which is also known as the Direct Discrete Method (DDM). This method combines some features of a variety of methods, especially finite volume and finite element, and gains some insight from the graph theory used in network analysis. The result is a method in which the set of equations which... 

    Numerical Simulation and Modeling of Thermosyphon Using PIV Method

    , M.Sc. Thesis Sharif University of Technology Bastankhah, Majid (Author) ; Saeedi, Mohammad Hassan (Supervisor)
    Heat pipe is a device with several applications in various industries such as electronics cooling, nuclear and renewable technologies. This apparatus transfers heat from a hot source to a cold one. Thermosyphon is a special type of heat pipe that transmits heat using gravitational forces. Although scholars have performed many experiments on thermosyphon, mostly they were about the thermal characteristics of thermosyphon and rarely the hydraulic specifications of thermosyphon have been investigated. But it is clear that these two specifications (thermal, hydraulic) relate to each other closely and detailed study about their interaction may bring out better results. In this thesis, initially a... 

    Obtaining a Semi-analytical Solution for Contaminant Transport in Coastal Aquifers: Fourier-galerkin Method

    , M.Sc. Thesis Sharif University of Technology Koohbor, Behshad (Author) ; Ataie-Ashtiani, Behzad (Supervisor) ; Jamali, Mirmosaddegh (Co-Advisor)
    Existing closed form solutions of contaminant transport problems are limited by the mathematically convenient assumption of uniform flow. These solutions cannot be applied for coastal aquifers where seawater intrusion induces a variable velocity field. The Fourier series method is adapted to obtain a semi-analytical solution for contaminant transport in confined coastal aquifer in which the saltwater wedge is in equilibrium with a freshwater discharge flow. The developed method can be applied for different scenarios of contamination. Two scenarios dealing with, respectively, contaminant leakage from a source at the aquifer top surface and aquifer contamination from the landward boundary are... 

    Assessment of Performance Based Behavior of of the Rock Mass Abutment Anchorage System during Construction of Karun IV Bridge by Numerical Methods

    , M.Sc. Thesis Sharif University of Technology Ghorbanzadeh, Alireza (Author) ; Sadaghiani, Mohammad Hossein (Supervisor)
    Three dimensional analyses have been carried out for predicting the behavior of the jointed rock slope of the abutments of the bridge which is proposed to be constructed across the river Karun4 in Iran using 3DEC. The rock overall slope angle is approximately 60 to 70 degrees, composed of highly jointed rock mass and the joint spacing and orientation are varying at different locations. Since 3DEC is a three-dimensional numerical code, utilizes a Lagrangian calculation scheme to model large movements and deformations of a blocky system, allows for modeling of large movements and rotations, and including complete detachment of rigid or deformable discrete blocks has been utilized for the... 

    Numerical Investigation of Laminar Premixed Flame Response to Acoustic Excitation

    , M.Sc. Thesis Sharif University of Technology Behzadi, Milad (Author) ; Farshchi, Mohammad (Supervisor)
    Flame Response to acoustic excitation which plays an important role in combustion chamber stability state may be found through numerical simulation. A finite volume code of higher order accuracy developed for compressible flows was adopted. Species equations along with a single-step irreversible reaction model were added to this non-reacting program. Changes were also made to the energy equation. Premixed methane/air flame in tubes was studied and the same problem was solved with FLUENT software. It was found that whether the Lewis number is considered constant or temperature dependent has a strong effect on flame structure and shape and that using mean values for gas properties yields out... 

    Generating a Pulsatile Pulmonary Flow after Fontan Operation by Means of Computational Fluid Dynamics (CFD)

    , M.Sc. Thesis Sharif University of Technology Ghoreyshi, Mostafa (Author) ; Saidi, Mohamad Said (Supervisor) ; Firoozabadi, Bahar (Supervisor) ; Navaee Shirazei, Mohammad Ali (Co-Advisor)
    This study considers blood flow in total cavopulmonary connection (TCPC) morphology, which is created in Fontan surgical procedure in patients with single ventricle heart disease. Ordinary process of TCPC operation reduces the pulmonary blood flow pulsatility; because of right ventricle being bypassed. This phenomenon causes a lot of side effects for patients. A cardiac surgeon has suggested that keeping main pulmonary artery (MPA) partially open, would increase pulmonary flow pulsations. MPA gets closed in ordinary TCPC operation. The purpose of current study is to verify the effects of keeping MPA partially open on pulmonary flow pulsations, by means of computational fluid dynamics (CFD).... 

    Numerical Investigation on Offshore wind Turbine Feasibility and Function

    , M.Sc. Thesis Sharif University of Technology Ebrahimi, Alireza (Author) ; Abbaspour Tehrani Fard, Madjid (Supervisor)
    This thesis consists of three main chapters. The first chapter is about describing principles about offshore wind turbine, principal concepts. This chapter also explains about advantages and disadvantages of installing wind turbine at offshore fields, and economical aspect of this kind of wind turbine farms. In the second chapter,anumerical method is used to investigate a SeaStar tension leg platform offshore wind turbine response behavior in parked condition. This code considers nonlinearities due to changes in tension of tethers. Wave forces are calculated adopting the Airy wave theory. Furthermore, shear turbulent wind is exerted on tower, with maximum speed 30 m/s on the hub. Since surge... 

    Accuracy and Stability Properties of the Numerical Integration Method with Combined Implicit or Explicit Steps for Use in Hybrid Simulations

    , M.Sc. Thesis Sharif University of Technology Abi, Amir Reza (Author) ; Ahmadizadeh, Mehdi (Supervisor)
    The increased need for experimental verification of the seismic performance of conventional and novel structural systems has resulted in highly sophisticated dynamic test procedures. Hybrid simulation is one of the most efficient experimental methods for assessment of dynamic and rate-dependent behavior of large-scale structural systems under earthquake excitation. Compared to earthquake simulations using shake tables, hybrid simulation may have significant advantages in terms of cost, scale, geometry, and required physical mass of structures. However, recent hybrid simulations have been limited to simplified structural models with only a few degrees of freedom. Currently, the major... 

    Structure Formation and Galactic Dynamics in Modified Gravity (MOG)

    , Ph.D. Dissertation Sharif University of Technology Vakili, Hajar (Author) ; Rahvar, Sohrab (Supervisor) ; Mohammad Movahed, Sadegh (Co-Advisor)
    The standard model of Cosmology (SM), based on Einstein’s theory of general relativity (GR), is the best model in describing the cosmic-scale observations. In galactic scales, however, galactic dynamics show a discrepancy between the observed luminous mass and the predicted value from the theory. Two approaches are suggested to eliminate this inconsistency: assuming the existence of dark matter within the context of GR, or modifying the theory of gravity in galactic scales, like MOND or MOG. In this thesis, we study the spherical collapse and the formation of shell galaxies in MOG, in comparison with SM. We introduce the action and the field equations of MOG and the equation of motion of a... 

    Numerical Methods for Approximation and Visualization of Invariant Manifolds in Dynamical Systems

    , M.Sc. Thesis Sharif University of Technology Naderi Yeganeh, Hamid (Author) ; Razvan, Mohammad Reza (Supervisor)
    Invariant manifolds are important objects in the theory of dynamical systems. The stable manifold theorem is a very important theorem about this concept which proves the existence of stable and unstable manifolds in a wide range of dynamical systems. The importance of invariant manifolds encourages us to view their pictures. It helps us to understand their bahavior. For this purpose, at first we need to approximate the invariant manifold we want to visualize. There are several algorithms designed to approximate invariant manifolds. Those algorithms approximate a set of points on an invariant manifold and then provide an approximation of the manifold by the calculated points. Visualizing an... 

    Determination of Hydrodynamic and Aerodynamic Coefficients and Longitudinal Dynamic Equation of a High Speed Catamaran with Commercial Softwares

    , M.Sc. Thesis Sharif University of Technology Motiallah, Arash (Author) ; Kazemzadeh Hannani, Siamak (Supervisor) ; Seif, Mohammad Saeed (Co-Advisor)
    In recent years design and manufacturing of high speed marine vessels has been developed. to estimate and control dynamics of these vessels the dynamic equation is needed.The aim of this research is Determination of hydrodynamic and aerodynamic coefficients and longitudinal dynamic equation of a high speed catamaran wich is a kind of AAMV. There are three ways to determine these coefficients. Analytical method which is usually not applicable for industrial problems, Experimental method which is too expensive and numerical method which have two parts. The first is softwares that analyse the flow with assumption that the fluid is inviscid and second softwares which solve the full Navier-Stokes... 

    Vibration Modeling of a Variable Section Beam under Moving Mass with Neural Networks Techniques

    , M.Sc. Thesis Sharif University of Technology Khorramdel, Reza (Author) ; Ghaemi Osgouie, Kambiz (Supervisor) ; Khayyat, Amir Ali Akbar (Supervisor)
    The investigation of the behavior of structures subjected to various kinds of loadings is of considerable importance. In this research, an attempt was made to analyze behavior of beams that a load is moving on them.Most of the existing relevant works in this field are dealt with examination of elastic beams with constant section, while in most cases beams with variable sections are used in order to have the optimum structure and appropriate stress distribution and to maximize strength to weight or cost ratio. While construct analysis is very advantageous, it is very difficult due to the complexities arising from the variable sections. But this design is so advantageous that it dominates... 

    Developing an Object-oriented Computer Program for Seepage Analysis through Earth Dams using Boundary Element Method

    , M.Sc. Thesis Sharif University of Technology Asadi, Roza (Author) ; Ashtiani, Ataie (Supervisor)
    Destruction of a dam is not only an economic disaster but also a catastrophe for the down stream residents. Seepage related problems are the main reasons for the destruction of the embankment dams. Therefore controlling seepage in an earth dam is of great importance.Graphical, experimental,and numerical methods can be applied for analysis of seepage problems in embankment dams.Due to the complexity of geometry and of in homogeneous and/or anisotropic media there are few analytical solutions to porous media problems. Numerical solutions have long played an important role in ground water calculation such as Finite Difference Method (FDM),Finite Element Method (FEM) and Boundary Element Method... 

    Modeling of Wellbore Stability in Shales including Proelsatic, Chemical and Thermal Effects

    , M.Sc. Thesis Sharif University of Technology Rafiee Pur, Saeed (Author) ; Ghotbi, Sirous (Supervisor) ; Pishvaie, Mahmoud Reza (Supervisor)
    Wellbore instability is one of the serious problems during drilling. This can cause delay in drilling, increasing drilling costs and in some cases well abandonment. The present project investigates the effects of non- isothermal drilling and the difference in salt concentration between formation fluid and drilling fluid on the stability of wellbores drilled in the saturated porous shale formations subjected to an arbitrary stress field. This project also focuses on the analysis of wellbore stability in shale formations in which the thermal diffusivity is higher than fluid invasion and the mechanism of heat transfer is dominated by conduction. The governing equations used in this dissertation... 

    Numerical Methods in Simulation and Implementation of Proportional-Weighted Integral (PWI) Controllers

    , M.Sc. Thesis Sharif University of Technology Rezaei, Davood (Author) ; Tavazoei, Mohammad Saleh (Supervisor)
    The main effort of this thesis is to present a numerical method to simulate and implement a special type of controllers, called proportional-weighted integral (PWI) controllers. For this purpose, at first mathematical equations of the fractional order proportional-integral controllers have been investigated in the time domain, and then by generalization of these controllers, the PWI controllers are achieved. Next the discretization of these controllers are carried out and the performance of the controllers are simulated by means of this discretization and comparison between these controllers and the conventional PI controllers has been held. After that a method for estimation of these... 

    Numerical Solution Of One-Dimensional Non-Fourier Bioheat Transfer Through Skin Tissue

    , M.Sc. Thesis Sharif University of Technology Fazel, Zeynab (Author) ; Taghizadeh Manzari, Mehrdad (Supervisor)
    Innovations in laser, microwaves, and similar technologies have significantly advanced thermal treatments for diseases or even injuries concerning skin tissue. For a thorough understanding in the underlying mechanisms of bioheat transfer behavior of skin,a1D unsteady non-dimensional hyperbolic model of heat transfer through this tissue with metabolic heat generation which is subject to specific boundary conditions, is solved numerically using the finite difference method. A thermal shock is generated at the base of the tissue, which moves forward with a finite speed. A Numerical solution for a simple one-layer skin tissue is obtained. Then, the effects of various parameters, time step,... 

    Measuring Limb Darkening of Distant Stars Using Microlensing Events by Finite Element Method

    , Ph.D. Dissertation Sharif University of Technology Golchin, Laya (Author) ; Rahvar, Sohrab (Supervisor)
    The finite-size effect in gravitational microlensing provides a possibility to measure the variation of surface brightness of stars from centre to limb which is called limb darkening profile. Measuring limb darkening profile provides information about star atmosphere. It is also useful in other fields of astrophysics. In this thesis we develop a numerical method to recover limb darkening of source stars from single lens microlensing light curves with finite source effect in which the lens transits the source disk. We use the Finite Element Method (FEM) as an inversion tool for discretization and inversion of the finite source effect integral equation. This method makes no explicit assumption...