Sharif Digital Repository

Geographical environments can be modeled through the medium of TINs, in which some discrete points are sampled as vertices, and the union of polygonal faces, particularly triangles, constitutes its surface. As regards the two-dimensional space, the TIN boundary is an x-monotone path and we focus on this case. If the number of vertices is too large to be stored or some sampled points should be removed due to a lack of vital information, the necessity of TIN simplification arises. On top of this situation, if a point observer locates on or above the TIN, the points visible to the observer have more priorities to be considered in the simplified TIN. For example, human eyes can see the closer or... 

Direct Torque Control (DTC) is one of the vector methods to control Permanent Magnet Synchronous Machines (PMSM). In order to achieve an appropriate control in vector control methods, an accurate estimation of flux is indispensable. Flux estimation should be fulfilled in a wide speed range without considerable dependence on motor parameters. Prevalent flux estimation methods are based on integration of stator voltage which is not feasible in low speed, or performed based on assumption of decoupled equations on d and q axis which is not precise for applications with fast dynamic. Different flux estimation methods are investigated in this thesis with the aim of improving the flux estimation in... 

The design and implementation of the hybrid control method for a three-pole active magnetic bearing (AMB) is proposed in this paper. The system is inherently nonlinear and conventional nonlinear controllers are a little complicated while the proposed hybrid controller has a piecewise linear form, i.e., linear in each sub-region. A state-feedback hybrid controller is designed in this study and the unmeasurable states are estimated by an observer. The gains of the hybrid controller are obtained by the LQR method in each sub-region. To evaluate the performance, the designed controller is implemented on an experimental setup. The experimental results show that the proposed method can efficiently... 

Recent advancements in wireless communication along with the urgent need for new care systems for the patients, has attracted the attention of many communication researchers to Wireless Body Area Networks (WBANs), which has led to IEEE 802.15.6 and IEEE 802.15.4j standards, accordingly. The main goal of such networks, is to send the vital data of the associate, through the over/in-body-implanted sensors, to one central node. One of the key features of these networks is the limited energy sources of the sensors, transmit the data. Meanwhile, on-time error-free transmission of the data is also of great importance. Therefore, designing a proper algorithm, satisfying the aforementioned... 

In this project a complete simulator for a two-winding, 25cm air gap Maglev system by considering the pratical constaritns, position and velocity observer and the current sensor dynamics was derived. In order to control the ball in any desired position a twisting sliding mode controller was designed as the basic controller in the rest of project. The designed controller can not transfer the ball in far trajectory. In first step we modify that to reach a better performance by changing the value of current, passing through the coils in steady state. In the second step, the far trajectories are divided to a finite number of sub-trajectory such that the ball can pass these sub-trajectory by... 

In modern industries, multivariate multistage auto-correlated processes are widely used to ensure productivity and product quality. Interconnections between work stations bring a challenging task in detecting various shifts and identifying their root causes. In addition, simultaneous monitoring process mean and variability with single control chart methods has gained considerable attention throughout these years. In this article, a double-max multivariate exponentially weighted moving average (DM-MEWMA) chart is proposed based on two novel statistics to monitor the parameters of multivariate multistage auto-correlated processes jointly. Prior knowledge of variation propagation has been used... 

One of the main arguments between scientific realists and scientific anti-realists is about observability. As a prominent anti-realist, van Fraassen and his theory of constructive empiricism and his views on observability and the use of scientific instruments, have been the subject of many debates. He believes that observation is the sole path to knowledge and observation is only possible through unaided human eye, so seeing through scientific instruments like microscopes does not count as observation, therefore the information gained from these procedures are not necessarily true.This thesis not only examines van Fraassen’s outlooks on the matter, but also examines his opponents’ view and... 

In this thesis, the performance of a special type of controllers, called Proportional-Integral weighted (PIw) controllers, in control of nonlinear systems is studied. To this aim, the domain of attraction of polynomial nonlinear control systems in the presence of PIw and Proportional-Integral (PI) controllers is estimated and compared with each other. For this estimation, two different methods are used, and the obtained results are compared. Next, adaptive PIw and adaptive PI controllers are designed to be used in control of nonlinear systems. The effectiveness of the proposed controllers is illustrated for a Continuous-Stirred-Tank-Reactor (CSTR) that has an uncertain parameter in its... 

Three-phase inverters as a UPS are very common in industry and non-linear loads such as rectifiers are growing in industry. Three phase inverter with non-linear load can lead to highly distorted output voltage which can make problem for sensitive loads such as servers etc. Parallel configuration of three-phase inverters, also have the same problem with non-linear loads. Droop control and Master/slave control methods are two major methods which investigated in this thesis. This paper proposes a method for reducing voltage THD in three phase inverters with non-linear load. The proposed method considers the load current as a disturbance and provide a control strategy to reject it using the... 

Structures that change color in an adjustable way have been noticed in recent years. There are structures in nature such as the skin of chameleons and octopuses and other animals that can change color. In recent years, inspired by these structures, materials based on photonic crystals or surface plasmonics have been proposed to change color. In this research, a review is made on these structures in nature as well as recent efforts to make such materials. In fact, photonic crystals create a special color due to the interference between scattered waves. For example, the change in the distance between the nanoparticles in the photonic crystals inside the chameleon skin is the cause of its color... 

Microrobots are the robots which manufactured or operated in micro dimentions. High accuracy, compatibility with harsh situations and caring or assembling in micro dimensions are the most important advantages of these robots. Manufacturing new microrobots with higher speed or increasing the velocity of existed microrobots is the discussion of these days.An A-shape microrobot designed and manufacturared before. The goal of this thesis is to model, identify the friction and observe the velocity of the A-shape microrobot. In low speeds both legs of microrobots are on the ground; it walks with the stick-slip motion principle. Increasing the velocity of the microrobot causes separation of one or... 

During the past decades, structural parameters are used as a tool for studying the formation and evolution of galaxies. Sersic parameter is one of these parameterswhich also known as shape parameter. Sometimes, measuring such parameters depend on the observed wavelength. So far, this dependence has been rarely attended. In this thesis we are trying to know how and why these parameters depend on the wavelength  

This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops... 

In an official announcement during the inaugural speech in 2012, where Hempel Award presented on behalf of the Philosophy of Science Association to Bas van Fraassen for “a lifetime scholarly achievement in the philosophy of science”, it was said that, “van Fraassen advocates a semantic approach to scientific theories and, on that basis, urges skepticism regarding laws of nature, anti-realism regarding unobservables, and pragmatism regarding explanation” (Gonzalez 2014, 5). van Fraassen’s approach to unobservable entities has a crucial role in his philosophy of science and also in this dissertation. The aim here is to defend van Fraassen’s claim based upon the distinction he makes between... 

In this paper, a novel control approach for one-dimensional bilateral teleoperated nanomanipulation system is proposed. While manipulating objects with a nanomanipulator, real time visual feedback is not available. So, force feedback is used to compensate for the lack of visual information. Since nanometer scale forces are dominated by surface forces instead of inertial forces as in macro world, scaling of nanoforces is one of the major issues of teleoperation system. The Hertz elastic contact model is used to model the interactions between the slave robot and the environment. The proposed framework uses the simple proportional derivative control, i.e., the master and slave robots are... 

Due to the presence of a random variable in the process dynamics or due to the presence of measurement noise, many processes have stochastic in nature. Behaviors of these processes are different from the deterministic processes and therefore their controllers are also different. The aim of this research is to design adaptive controller for stochastic processes with a non-strict feedback structure and in the presence of input constraints. Also, the considered system has other limitations such as the unmeasured states, actuator failure, unknown dynamics and fixed time stability is desired. The input limitation can be caused by the limitation of the final control element, because the input... 

This paper proposes a globally and exponentially convergent predictor observer for attitude and position estimation based on landmark measurements and velocity (angular and linear) readings. It is assumed that landmark measurements are available with time delay. The maximum value of the sensor delay under which the estimation error converges to zero is calculated. Synthesis of the observer is based on representation of the rigid-body kinematics and the sensor delay by a combination of ordinary and partial differential equations (ODE-PDE). An observability condition specifies necessary and sufficient landmark configuration for convergence of attitude and position estimation error to zero.... 

This thesis is related to the identification and design of a robust controller for an electrohydrodynamic printer system. As an emerging technology, this printer uses a strong electric field to deliver fluid ink from various conductive materials to the substrate. Modeling this system is complex due to the effect of different variables on its performance. In this project, first a simplified model with numerical solution data of the COMSOL model that is validated experimentaly is proposed. Then, by presenting a new control method that is a variant of an active disturbance rejection control baesd on extended state observer has been controlled. The new control method is actually an amendment to... 

To suppress stick-slip oscillations a controller is designed. However, because the lack of rotary speed at the surface, two approaches to implement this controller is considered: 1) Using an observer to estimate the rotary speed, 2) Using acoustic communication. To implement the second method, we confront several challenges including delay in the feedback loop and noise in communication system. In this thesis, a controller is designed based on prediction of the current rotary speed using its delayed value. It is shown that this system is less sensitive to uncertainty in system parameters compared to the controller based on observer. The performance of both systems in terms of settling... 

In a typical rigid robot manipulator, joint angels and velocities are often considered as system states. Joint angels are usually measured by precise Shaft Encoders. However, lack of velocity measurement sensors “Tachometers” and their undesired characteristics in most of existing robotic systems make it difficult to have access to full system states. As full access to the system states in various applications is inevitable, velocity observers can be used to reconstruct or estimate the unmeasured velocity signals. This thesis presents an observer for global estimation of joint velocities in robot manipulators. A non-minimal model of a robotic manipulator is introduced to design an...