Sharif Digital Repository

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

Despite numerous experimental studies, there is a lack of fundamental understanding on how the chemical composition of a co-solvent at different wettability conditions might affect the pore-scale events and oil recovery efficiency in 5-spot models. In this study visualization of solvent injection experiments performed on a one-quarter five spot glass micromodel, which was initially saturated with the crude oil. One hydrocarbon solvent was considered as base, and four other groups of commercial chemicals, as well as their mixtures, were used as co-solvents. Microscopic and macroscopic displacement efficiency of solvent mixtures in both strongly water-wet and oil-wet media has been studied. It... 

Smart water flooding as a developing technique utilizes modified water chemistry in terms of salinity and composition to prepare the best-suited brine composition for a specific brine/oil/rock system to obtain higher oil recovery efficiency. Huge amount of unrecovered oil is expected to be remained in carbonate reservoirs; however, few research works on incremental oil recovery during smart water injection in carbonate cores at reservoir condition are reported. Several core flooding tests using one of the Iranian carbonate reservoir rock are conducted to check the effectiveness of smart water injection for more oil recovery efficiency. The results reaffirm the positive effect of sulfate ions... 

Waterflooding has been regarded as an efficient method for pressure maintenance of oil reservoirs. x Improved techniques such as Smart Water flooding as a new EOR/IOR process has gained more momentum based on the recent research activities in this field and the reduction of oil price. Despite many efforts on achieving the governing mechanisms of Smart Water flooding in many individual fields, most of data are sparse and more possible mechanisms which explains all the interactions yet to be introduced. This experimental study used a systematic laboratory framework which is based on seawater treatments at fixed ionic strength to eliminate the ionic strength effects, NaCl considered as the... 

It is well known that the oil recovery is affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of medium surfaces has remained a topic of debate in the literature. Furthermore, there is a little information of the way dispersed silica nanoparticles affect the oil recovery efficiency during polymer flooding, especially, when heavy oil is used. In this study, a series of injection experiments were performed in a five-spot glass micromodel after saturation with the heavy oil. Polyacrylamide solution and dispersed silica nanoparticles in polyacrylamide (DSNP) solution were used as injected fluids. The oil recovery as well as fluid distribution in... 

In addition to reducing carbon dioxide (CO2) emission, the high oil recovery efficiency achieved by CO2 injection processes makes CO2 injection a desirable enhance oil recovery (EOR) technique. Minimum miscibility pressure (MMP) is an important parameter in successful designation of any miscible gas injection process such as CO2 flooding; therefore, its accurate determination is of great importance. The current experimental techniques for determining MMP are expensive and time-consuming. In this study, multi-gene genetic programming has been combined with constrained multivariable search methods, and a simple empirical model has been developed which provides a reliable estimation of MMP in a... 

Over 60% of the world's discovered oil reserves are held in carbonate reservoirs, which are mostly naturally fractured. Conventional water flooding results in low oil recovery efficiency in these reservoirs as most of them are oil-wet. On account of negative capillary forces, injected brine cannot penetrate simply into an oil-wet matrix of fractured formations to force the oil out. Wettability alteration of the rock surface to preferentially more water-wet state has been extensively studied using both smart water and surfactants separately. This study aims to study the effects of Mg2+ as one of the most important wettability influencing ions on the wetting properties of oil-wet carbonate... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

The solvent-based process appears to be an increasingly feasible technology for the extraction of heavy oil reserves. However, there is a lack of fundamental understanding of how fracture geometrical characteristics control the oil recovery efficiency in this type of enhanced oil recovery (EOR) technique. In this work, a series of experiments were performed whereby the pure and mixed hydrocarbon solvents (HCS) displaced heavy oil in fractured five-spot glass micro-models. Successive images of the solvent injection process were recorded. The oil recovery factor, as a function of injected pore volume of solvents, was measured using image analysis of the provided pictures. It has been observed... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

This paper studies a WAG process for improving the recovery efficiency in light oil reservoirs. Until now, few references have reported the role of CO2 mole percent on recovery improvement in light oil reservoirs. The injected gas was changed, and the effect of composition changes on performance of core flood experiments were conducted at fixed flow rate. Five series of experiments (varied in methane mole percentages, 0, 25, 50, and 75, 100) were systematically examined. The results indicated that the oil recovery efficiency improved with the increasing of CO2 mole ratio and there was also maximum recovery efficiency in this work. That would be helpful to better understanding the role of CO2... 

The amount of residual oil trapped in the matrix of a fractured reservoir after water drive, either natural water drive or water injection, depends on the wettability of the matrix rocks. Gas oil gravity drainage (GOGD) has been proposed as the tertiary oil recovery process for this type of oil reservoir. The current work focuses on experimental investigation of tertiary GOGD in fractured porous media under different types of matrix wettability. Results of a set of experiments performed in artificial porous media composed of sand packs and glass beads of different wettability have been used to check the GOGD rate and the ultimate oil recovery for previously waterflooded models. A novel... 

Naturally fractured reservoirs (NFRs) contribute in large extent to oil and gas production to the ever increasing market demand of fossil energy. It is believed that the vertical displacement of oil during gas injection assisted by gravity drainage (GAGD) is one of the most efficient methods for oil recovery in these reservoirs. Hence, in this work, unconsolidated packed models of cylindrical geometry surrounded by fracture were utilized in order to perform a series of flow visualization experiments during which the contribution of different parameters such as the extent of matrix permeability, physical properties of oil (viscosity, density, and surface tension) and the withdrawal rate was... 

Spontaneous water imbibition into the matrix blocks is known as the main mechanism for increased oil recovery from naturally fractured oil reservoirs. The rate of oil recovery and its ultimate value is mostly affected by wettability of the rocks and their pore structure. Oil viscosity also greatly influences the rate of oil recovery. A novel experimental model was utilized to study the imbibition mechanism under different wettability conditions. Matrix blocks made from different grain types and size distributions of glass beads were saturated with two different types of synthetic oil, to mimic the oil-saturated matrixes. The wetting characteristic of the models used in this study were... 

Micromodel is small-scale artificial model of porous medium which is known as a novel approach for simulating flow and transport in porous media. For better understanding the effect of fracture geometrical properties on oil recovery efficiency, a series of first contact miscible solvent injection process were conducted on horizontal glass micromodels at several fixed flow rate conditions. The micromodels were initially saturated with the heavy crude oil. The produced oil as a function of injected volume of solvents was measured using image analysis of the provided pictures. The concentration calibration curves of solvents in heavy crude oil were used for evaluating the solvents... 

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based...