Sharif Digital Repository

With the decline in oil discoveries over recent decades, it is believed that enhanced oil recovery (EOR) technologies will play a key role to meet energy demand in the coming years. Polymer flooding is used commonly worldwide as an EOR process. In this work, we propose the synthesis of protected polyacrylamide (PAM) nanoparticles (PPNs) with a hydrophobic polystyrene (PSt) shell by one-pot two-step inverse emulsion polymerization, in which the PSt shell was created by surface polymerization. The shell protects the active PAM chains from premature degradation caused by the harsh environment in the reservoirs, controls the release of the chains as rheological modifiers, and additionally, it... 

Gravity drainage is known to be one of the most effective methods for oil recovery in fractured reservoirs. In this study, both free fall and controlled gravity drainage processes were studied using a transparent fractured experimental model, followed by modelling using commercial CFD software. The governing equations were employed based on the Darcy and mass conservation laws and partial pressure formulation. Comprehensive examination was done on variables such as fluid saturation, velocity, and pressure distribution in the matrix and fracture, as well as fluid front level and production rate. Additionally, effects of the model parameters on the gravity drainage performance were... 

Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

The present study aims at monitoring the bulk and bubble-scale behaviour of anionic polyacrylamide-sodium dodecyl sulphate stabilized foam in the absence and presence of oil. Dynamic stability tests provided results indicating that polymer increases the foam dynamic stability and decreases the drainage. Oil slows down the drainage rate of polymer-surfactant foam. In the absence of oil, foam is drained gradually/smoothly whereas remarkable fluctuations are evident in drainage graphs when oil is present. The Hele-Shaw cell was employed to conduct bubble-scale as well as statistical analyses on how foam texture is influenced by a polymer-surfactant system and hydrocarbon. Bubble-scale analyses,... 

Gas flooding processes have emerged as attractive enhanced oil recovery (EOR) methods over the last few decades. Among different gas flooding processes, CO2 flooding is recognized as being most efficient for displacing oil through miscible displacement. Minimum miscibility pressure (MMP) is a crucial parameter for successfully designing CO2 flooding, which is traditionally measured through time-consuming, expensive, and cumbersome experiments. In the present study, a new reliable model based on feed-forward artificial neural networks was presented to predict both pure and impure CO2-crude oil MMP. Among various properties and parameters, reservoir temperature, reservoir oil composition, and... 

Advanced reservoir characterization methods can yield geological models at a very fine resolution, containing 1011–1018 cells, while the common reservoir simulators can only handle much lower numbers of cells due to computer hardware limitations. The process of coarsening a fine-scale model to a simulation model is known as upscaling. Predicting the accuracy of simulation results over an upscaled grid with respect to the fine grid is highly important, as it can yield the optimum upscaling process. In this paper, permeability-based and velocity-based a priori error estimation techniques are proposed by introducing image processing-based comparison methods in the context of upscaling. The... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude... 

An integrated model is proposed for simultaneous study of CO2-flood enhanced oil recovery and sequestration in both technical and economic points of view. Based on this model, Green Balance software is developed for quick estimation of performance and profitability of CO2-flood enhanced oil recovery and carbon capture and storage projects. This software benefits users to do sensitivity analyses in extended times, easily and quickly. Several sensitivity analyses were done and effects of reservoir parameters and economic expenditures and taxes were studied. Among all affecting parameters, the role of tax per CO2 emission is the most important one. The use of... 

In the recent years, declination of oil reservoir causes the importance of researches on enhancement of oil recovery processes become more important. One of wide applicable approaches in enhancement of oil recovery is carbon dioxide injection which becomes interested because of relative low cost, good displacement and environmentally aspects. The injection of carbon dioxide to oil reservoir causes the lighter hydrocarbons of crude oil are extracted by CO2. This phenomena can be affected by various factors such the solubility of hydrocarbons in carbon dioxide so in the present investigation Fuzzy c-means (FCM) as a novel approach for estimation of solubility of alkanes in carbon dioxide in... 

In the recent years due to increasing demand for energy and declination of reservoir production, an impressive notice on enhancement of oil recovery has been found. The gas injection especially carbon dioxide injection due to low cost and friendly environmentally of this approach the special attention to CO2 injection increased. The miscibility is known as key factor which effects on enhancement of recovery. The miscibility is controlled by interfacial tension of hydrocarbons and carbon dioxide so the importance of investigation of the interfacial tension becomes highlighted.in this investigation by using radial basis function (RBF) artificial neural network (ANN) as a novel approach the... 

The low salinity water injection has become one of the most important studies in the oil industry for improving oil recovery compared to conventional seawater injection. Thus, extensive studies have been conducted in carbonate and sandstone reservoirs to investigate how the physical properties of rocks and the chemical composition of fluids influence low salinity effect, while, the carbonate reservoir rocks requires more investigation of the effect of molecular and/or ionic interactions. In this experimental work, the effectiveness of various water flooding schemes in carbonate reservoir rock samples is investigated. In this regard, the oil recovery potential of seawater (SW), reservoir... 

Engineered water (EW) flooding is one of the enhanced oil recovery (EOR) techniques in carbonate reservoirs. In this method, the wettability of reservoir rock is altered by controlling the amount of various ions in the injected brine. The thermodynamics of wettability is related to the surface interactions and stability of water film on a rock surface. It can be identified by calculating disjoining pressure isotherms. In this study, core flooding tests, contact angle and zeta potential measurements along with the disjoining pressure isotherm calculation by the DLVO theory were used to investigate the wettability alteration of dolomite rock. Four brines include reservoir formation water... 

Phase behavior of active crude oil/alkaline was systematically studied in the presence of cosolvents. For this purpose, several factors have been considered: alkaline concentration, oil concentration, and type of brine. The best composition was used to generate emulsion for rheology and displacement tests. Furthermore, precipitation of alkaline was eliminated by its synergy with EDTA. Next, rheology of emulsion was analyzed by which a Power law model was developed that indicates non-Newtonian behavior of emulsion. Moreover, the viscosity of emulsion was reduced by the addition of cosolvent as well as by the increase of alkaline concentration. Finally, the best formulation (containing... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

CO2 gas injection is known as one of the most popular enhanced oil recovery techniques for light and medium oil reservoirs, therefore providing an acceptable mass transfer mechanism for CO2–oil systems seems necessary. In this study, interfacial mass transfer coefficient has been evaluated for CO2–normal heptane and CO2–normal hexadecane systems using equilibrium and dynamic interfacial tension data, which have been measured using the pendant drop method. Interface mass transfer coefficient has been calculated as a function of temperature and pressure in the range of 313–393 K and 1.7–8.6 MPa, respectively. The results showed that the interfacial resistance is a parameter that can control... 

High molecular weight polyacrylamide (PAM) nanoparticle dispersions are products with wide application possibilities, the most important of which is in petroleum industry such as drilling fluid and flooding agent in enhanced oil recovery. For that aim, it is necessary to achieve complete control of the final dispersion and polymer properties during the synthesis step. In this work, PAMs were synthesized by inverse emulsion polymerization of aqueous acrylamide solution in cyclohexane in the presence of emulsifier mixture of Span 20 and Span 80. We present a comprehensive study of the effects of variation of all important reaction conditions (agitation rate, reaction time and temperature,... 

Production optimization is defined as the process of maximizing oil production over the long term while minimizing total production costs. The overall goal is to achieve the optimum profitability from the well or field. In this process, the reservoir system can be considered as a multiple input–output system. In this complex system injection and production wells are known as inputs and outputs. The output of the system is often affected by various parameters consisting reservoir conditions, petrophysics, and PVT data. The optimization of the injector rates and number and installation of submersible pumps are the main issues which have been studied in this paper. Determining the factor with... 

Environmentally responsive surface-modified nanoparticles are colloidal nanoparticles coated with, at least, two physicochemically distinct surface groups. Recent advances in the synthesis and production of nanoparticles have enabled the production of environmentally responsive surface-modified nanoparticles with both hydrophilic and hydrophobic surface groups. These nanoparticles act like colloidal surfactants. In this paper, environmentally responsive surface-modified silica nanoparticles are synthesized and used for enhancement of oil recovery. For this purpose, silica nanoparticles are coated with polyethylene glycol chains as hydrophilic agent and propyl chains as hydrophobic agent at... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

Although Alkaline-Surfactant-Polymer (ASP) flooding is proved to be efficient for heavy oil recovery, the displacement mechanisms/efficiency of this process should be discussed further in fractured porous media especially in typical waterflood geometrical configurations such as five-spot injection-production pattern. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels which were initially saturated with heavy oil. The ASP flooding tests were conducted at constant injection flow rates and different fracture geometrical characteristics were used. The ASP solutions constituted of five polymers, two surfactants and three alkaline types. The results...