Sharif Digital Repository

The presence of different energy carriers as well as the advent of new multi-generation technologies such as combined heat and power (CHP) at homes necessitates designing an integrated model for optimal operation of such multi-carrier energy home. A residential energy hub model including a CHP and a Plug-in hybrid electric vehicle (PHEV) is presented in this paper to show the multi-carrier energy system operation. In addition, this paper proposes an optimization-based formulation for PHEV charging control in the residential energy hub. The payment cost is minimized for the charge scheduling of PHEV through optimization of the residential energy hub operation in response to the... 

This paper presents a new method to simultaneously optimize components' size, set points of the control system and slope of PV panels of standalone hybrid energy systems (HESs) using the Passive Congregation PSO (PSOPC) approach. New control set points are defined for the HES, and a new operation strategy is presented based on the defined set points. The optimization algorithm determines the optimal values of the set points to efficiently optimize the HES operation. The effectiveness of the proposed control set points is finally verified through some numerical analyses. In this regard, the proposed optimization method is employed to optimize various HES configurations and compared with other... 

In this research, a site selection method for wind-compressed air energy storage (wind-CAES) power plants was developed and Iran was selected as a case study for modeling. The parameters delineated criteria for potential wind development localities for wind-CAES power plant sites. One important consequence of this research was the identification of the wind energy potential for wind-CAES sites. The theoretical wind energy potential of Iran of greater than 50 W/m2 was identified from a wind atlas of Iran. The model produced factor maps by considering the boundary conditions of the input data and created geo-databases from the outputs maps. The main factor maps were electrical grids and... 

This paper presents a comprehensive operation model for micro-grids (MG) operating in the islanded mode. Various energy sources of a MG including diesel engine generator, micro-turbine, wind turbine and photovoltaic cell as well as battery storage and AC/DC rectifier/inverter are modeled in the proposed framework. Fuel costs, emission costs, and operation and maintenance (O&M) costs of these sources as well as their operating limits and characteristics are considered in the model. Furthermore, a new multi-cross learning-based chaotic differential evolution (MLCDE) algorithm is presented to solve the optimization problem of MG operation. The numerical results obtained from the proposed... 

In the context of sustainable clean hydrogen production pathways, photovoltaic-electrolyzer systems are one of the most promising alternatives for acquiring hydrogen from renewable energy sources. In fact, determining the optimal set of design and operating variables are always a key issue while coupling directly renewable electricity sources to PEM electrolyzers. Few previous studies have attempted to find the optimal size and operational condition of directly coupled photovoltaic-electrolyzer (PV/El) systems in order to maximize the hydrogen production or to minimize energy transfer loss between photovoltaic devices and the electrolyzer. Nevertheless an easy and efficient approach still... 

This paper focuses on multi-objective optimisation (MOO) to optimise the planar solid oxide fuel cell (SOFC) stacks performance using a genetic algorithm. MOO problem does not have a single solution, but a complete Pareto curve, which involves the optional representation of possible compromise solutions. Here, two pairs of different objectives are considered as distinguished strategies. Optimisation of the first strategy predicts a maximum power output of 108.33 kW at a breakeven per-unit energy cost of 0.51 $/kWh and minimum breakeven per-unit energy cost of 0.30 $/kWh at a power of 42.18 kW. In the second strategy, maximum efficiency of 63.93%at a breakeven per-unit energy cost of 0.42... 

Energy hub as a super node in electrical distribution level has strong potential to receive energy in various carriers and after convert and store, satisfy hub required demands. On the other hand, CO2 emission and fossil fuels reduction raise up the need for integration of renewable based electricity generation such as wind and solar to energy hubs. In this paper, economical operation of energy hub including, stochastic wind generation, Combined Heat and Power (CHP) unit, boiler, and heat and electricity storages are modelled and analyzed. Responsive loads are used for more flexibility of the studied energy hub. Numerical result is observed through GAMS software to serve a commercial load in... 

In this study, application of the Response Surface Methodology and the Central Composite Design (CCD) technique for modeling and optimization of the influence of several operating variables on titanium recovery in a leaching process were investigated. The four main leaching parameters, namely temperature, acid concentration, leaching time and solid to liquid ratio, were changed during-the leaching experiments based on the CCD. A total of 30 leaching experiments were designed and carried out in the CCD method according to software-based designed matrix. According to the results, i.e., titanium recoveries with these four parameters as well as empirical model equations were developed. The model... 

Performance degradation remains as one of the primary limitations for practical applications of proton exchange membrane (PEM) fuel cells. The performance of a PEM fuel cell stack is affected by many internal and external factors, such as fuel cell design and assembly, degradation of materials, operational conditions, and impurities or contaminants. Performance degradation is unavoidable, but the degradation rate can be minimized through a comprehensive understanding of degradation and failure mechanisms. In present work, a single PEM fuel cell for stationary applications is investigated. Membrane and catalyst layers (anode and cathode electrodes) are considered as critical components that... 

This paper presents a new method to simultaneously optimize components' size, set points of the control system and slope of PV panels of standalone hybrid energy systems (HESs) using the Passive Congregation PSO (PSOPC) approach. New control set points are defined for the HES, and a new operation strategy is presented based on the defined set points. The optimization algorithm determines the optimal values of the set points to efficiently optimize the HES operation. The effectiveness of the proposed control set points is finally verified through some numerical analyses. In this regard, the proposed optimization method is employed to optimize various HES configurations and compared with other... 

In the present study a comprehensive thermoeconomic modelling of a heat recovery steam generator (HRSG) for a typical 4MW class gas turbine is performed. Usually, the thermoeconomic analyses involve a thermodynamic model of the HRSG and an economic model dedicated to assess the cost. In this study, different configurations of single and dual pressure level HRSGs are optimized and afterward compared to find the economical design. For these configurations thermodynamic model calculates the performance and the energy balance of systems at the optimal operating conditions which are derived from optimization model, and economic model estimates total cost per unit of produced energy. Finally,... 

The exact numerical solution of the nonlinear Ginzburg-Landau equation for Josephson junctions is obtained, from which the precise nontrivial current density and effective potential of the Josephson junctions are found. Based on the resulting potential well, the tunneling probabilities of the associated bound states are computed which are in complete agreement with the reported experimental data. The effects of junction and bias parameters such as thickness of the insulating barrier, cross sectional area, bias current, and magnetic field are fully investigated using a successive perturbation approach. We define and compute figures of merit for achieving optimal operation of phase qubits and... 

Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

While researchers have developed several approaches to attain design variable settings that simultaneously optimize multiple-quality characteristics, the multi-response optimization has become a common practice in complicated manufacturing processes. Most of these research works assume independency of responses where their variances are constant over the experimental space. However, there are many manufacturing processes in practice where the quality characteristics under consideration are correlated. In this study, an efficient approach based on principal component analysis and a conventional desirability function is proposed to optimize correlated multiple responses. This approach not only...