Sharif Digital Repository

Multivariate curve resolutions (MCR) along with other chemometric techniques are proposed to improve the analysis of Iranian Elettaria cardamomum (E. cardamom) essential oil with gas chromatography-mass spectrometry (GC-MS). In addition, multivariate curve resolution-alternating least squares (MCR-ALS) is used to obtain pure elution and mass spectral profiles for the components present in each chromatographic segment as well as their relative concentrations. This strategy was also used to overcome the problems of baseline offset, asymmetric peaks, retention time shifts, and overlapped and embedded peaks occurring during GC-MS analysis. The analysis of GC-MS data revealed that 42 components... 

This work is concerned with the monitoring of ultrasound effects on inhibition, as well as the reversible kinetics modeling of asphaltene flocculation in toluene-n-alkane systems, which has been rarely reported in the literature. A crude oil sample was exposed to ultrasound waves, and then the colloidal structural evolutions of flocculated asphaltene particles induced by addition of n-alkane were studied, using a confocal microscopy. Observations confirmed that radiation of ultrasound can change the irreversibility of asphaltene flocculation in crude oil. To interpret the kinetics of asphaltene flock aggregation, the Smoluchowski model was used, and the time dependent size distribution of... 

Three strategies were employed for the assembly of gold nanoparticles on silica-coated magnetite particles (SCMPs). In strategy I, citrate-coated gold nanoparticles were attached on the surface of amine-SCMPs. In strategy II, amine-SCMPs were coated with carboxylated gold nanoparticles via amide bond formation. In strategy III, the thiol-SCMPs surface was coated with gold nanoparticles. Among the above examined strategies, coating amine-SCMPs with gold nanoparticles via strategy I resulted in a better coverage and stronger intensity of absorption bands. Furthermore, results obtained through strategy I showed that decreasing the pH of the solution from 7 to 3 leads to a further red-shift of... 

In this work, a novel heterogeneous organocatalyst was synthesized by immobilization of hydroxide ions on the modified salep as a natural polymer. Because of the grafting of ionic polymer chains onto the salep backbone, catalyst has high loading level of hydroxide ions (3.01 mmol/g). The resulting catalyst shows excellent activity in the synthesis of 4H-benzo[b]pyrans in water at room temperature in short reaction times. The present catalyst and protocol represent a simple, ecologically safe and cost-effective route to synthesize 4H-benzo[b]pyrans with high product yield, as well as easy catalyst recycling  

Azlactones have been prepared via Erlenmeyer synthesis from aromatic aldehydes and hippuric acid using Fe 2O 3 nanoparticles under ultrasonic irradiation. Short reaction times, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure  

An eco-friendly, simple, and effective protocol is developed for the synthesis of various multisubstituted 2-aminothiophenes. In the presence of a catalytic amount of ZnO (5 mol), ketones or aldehydes, malononitrile and elemental sulfur were converted to the corresponding 2-aminothiophene derivatives in moderate to high yields (27%-70%) under solvent-free conditions at 100 °C. Zinc oxide as an efficient, readily available, and reusable catalyst, showed very good catalytic activity for the synthesis of 2-aminothiophene derivatives. Thus far, little research has been reported on the Gewald reaction under solvent-free conditions; to the best of our knowledge, this is the first time that it has... 

In this study, mathematical modelling of oxidative coupling of methane (OCM) to C 2 hydrocarbons (C 2H 6 and C 2H 4) over La 2O 3/CaO catalyst in a fixed-bed reactor operated under isothermal and non-isothermal conditions was investigated using the MATLAB program. In this process, methane and acetylene were the inputted feed and ethane, ethylene, propylene, propane, i-butane and n-butane were the output products. The amount of methane conversion obtained was 12.7% for the former feed however; if pure methane was inputted this conversion rose to 13.8%. Furthermore, the plasma process would enhance the conversion, selectivity towards desired product and process yield. A comparison between the... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO 2-coated multiwalled carbon nanotubes (NH 2-TiO 2-CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH 2-TiO 2-CNT nano-composite. These techniques showed that the NH 2-TiO 2-CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH 2-TiO 2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔE p) of 70.6mV and a formal potential (E 0′) of -367.65mV (versus... 

The electrohydrodynamic (EHD) vortices produced by an electric current in freely suspended liquid crystal (LC) films of N-(4-methoxybenzylidene)-4- butylaniline (MBBA), convert to a pure rotation in the presence of external electric field (E ext) perpendicular to the current direction. Here, the direction and strength of the rotation are precisely under control by our self-made device called "liquid-film motor". In this paper, we present experimental observations of the EHD fluid flow when external electric field varies from zero to a value in which pure rotation on the liquid crystal (LC) film is observed. We also show experimentally that the presence of external electric field causes a... 

The main aim of this work was to assess the ability of Bayesian multivariate adaptive regression splines (BMARS) and Bayesian radial basis function (BRBF) techniques for modelling the gas chromatographic retention indices of volatile components of Artemisia species. A diverse set of molecular descriptors was calculated and used as descriptor pool for modelling the retention indices. The ability of BMARS and BRBF techniques was explored for the selection of the most relevant descriptors and proper basis functions for modelling. The results revealed that BRBF technique is more reproducible than BMARS for modelling the retention indices and can be used as a method for variable selection and... 

Dithiocarbamic acids and thiols are employed in the Bargellini reaction to generate useful intermediates for the synthesis of organic molecules. This is the first time that dithiocarbamic acids are used as nucleophile in this reaction  

Solid-phase microextraction (SPME) is a fast, solvent-free technique, which, since its introduction in the 1990s, has been increasingly applied to sample preparation in analytical chemistry. Conventional SPME fibers are fabricated by making a physical bond between the usual silica substrate and the polymeric coatings. However, some applications are limited, as the lifetime and the stability of conventional SPME fibers cannot meet the demands of analyzing relatively non-volatile compounds with more polar moieties. There have been attempts to analyze less volatile compounds by increasing the thermal, physical and chemical stability of the fibers. In this review, we present some new... 

A modelling of the anaerobic digestion process of molasses was conducted in a 70-L multistage anaerobic biofilm reactor or hybrid anaerobic baffled reactor with six compartments at an operating temperature of 26 °C. Five hydraulic retention times (6, 16, 24, 72 and 120 h) were studied at a constant influent COD concentration of 10,000 mg/L. Two different kinetic models (one was based on a dispersion model with first-order kinetics for substrate consumption and the other based on a modification of the Young equation) were evaluated and compared to predict the organic matter removal efficiency or fractional conversion. The first-order kinetic constant obtained with the dispersion model was... 

This work is concerned with the experimental investigation of mass transfer, which occurs during diffusion of hydrocarbon solvents in heavy oil based on constant and concentration-dependent diffusion coefficient. Here, a series of free fall diffusion experiments have been conducted in sealed test tubes at fixed temperatures. Pentane, hexane, and octane were used as solvents and were placed on heavy oil in tubes. The diffusivity of heavy oil into solvents was monitored by a digital camera. The image analysis technique was applied to extract concentration profiles in diffusion zones of solvents by means of calibration curves. Fick's second law was used to obtain both constant and... 

The preparation of two new bis(N-heterocyclic carbene) platinum(ii) complexes, in which NHC rings are joined by a CH2 linker group, is described. While, the chelate complex [PtMe2(bis-NHC1)], 1, was formed with large tert-butyl wingtips, the iso-propyl N-substituent analogue favors formation of the cluster complex [Pt2Me4(μ- SMe2)(μ-bis-NHC2)]2(μ-Ag2Br2), 2, in which two binuclear platinum(ii) complexes are linked together by an Ag2Br2 unit. The chelating platinum complex 1 undergoes aerial CO2 fixation and forms platinum(ii) carbonate complex [Pt(CO3)(bis-NHC1)], 3  

Copper-succinate-layered hydroxide (CSLH), a new nanohybrid material, was synthesized as an inorganic-organic nanohybrid, in which organic moiety was intercalated between the layers of a single cation layered material, copper hydroxide nitrate. Microporous scaffold carbon material was obtained by thermal decomposition of the nanohybrid at 500°C under argon atmosphere followed by acid washing process. Furthermore, the heat-treated product of the nanohybrid at 600°C was ultrafine mesoporous metallic copper particles. The results of this study confirmed the great potential of CSLH to produce the carbon material with large surface area (580m2/g) and high pore volume copper powder (2.04cm3/g)  

Highly active unsupported MoO3 and Co -MoO3 catalysts were prepared by a simple solution reaction method in the presence of different organic additives. Catalysts were characterized by the XRD, BET surface area measurement, SEM and TEM techniques. Results suggested that utilizing different additives produced different morphologies OfMoO3 microstructures. Optimizing reaction conditions was found to produce more active molybdenum oxide nanoparticles when urea and PEG200 additives were utilized. XRD and TEM results indicated crystal growth restriction after cobalt incorporation. Catalytic activities of prepared materials were evaluated in the hydrodesulfurization reaction of Naphtha. Products... 

Petroleum monoaromatics including benzene, toluene, ethylbenzene, and xylenes (BTEX) are among the notorious volatile organic compounds that contaminate water and soil. In this study, a surfactant- modified natural zeolite and its relevant granulated nanozeolites were evaluated as potential adsorbents for removal of petroleum monoaromatics from aqueous solutions. All experiments performed in batch mode at constant temperature of 20°C and pH of 6.8 for 48 h. The results revealed that the amount of BTEX uptake on granulated zeolites nanoparticles were remarkably higher than the parent micron size natural zeolite (in the order of four times). The isotherms data were analyzed using five models... 

This review covers the most recent developments of inorganic and organic-inorganic composite coatings for orthopedic implants, providing the interface with living tissue and with potential for drug delivery to combat infections. Conventional systemic delivery of drugs is an inefficient procedure that may cause toxicity and may require a patient's hospitalization for monitoring. Local delivery of antibiotics and other bioactive molecules maximizes their effect where they are required, reduces potential systemic toxicity and increases timeliness and cost efficiency. In addition, local delivery has broad applications in combating infection-related diseases. Polymeric coatings may present some... 

A new type of composite material based on carbon nanotubes (CNTs) and sol-gel chemistry was prepared and used as sorbent for needle trap device (NTD). The synthesized composite was prepared in a way to disperse CNTs molecules in a sol-gel polymeric network. CNT/silica composites with different CNT doping levels were successfully prepared, and the extraction capability of each composite was evaluated. Effects of surfactant and the oxidation duration of CNTs on the extraction efficiency of synthesized composites were also investigated. The applicability of the synthesized sorbent was examined by developing a method based on needle trap extraction (NTE) and gas chromatography mass spectrometry...