Sharif Digital Repository

We present a procedure for simultaneous deposition of enzyme-laden chitosan/reduced graphene oxide (rGO) film by electrophoretic deposition (EPD) for fast and efficient detection of glucose. The role of rGO nanosheets is studied on the EPD kinetics of the enzyme-laden suspensions. Investigating the performance of the biosensor by electrochemical techniques indicates its high sensitivity (9700 μA.mM−1.cm−2), low limit of detection (4 µM), and suitable selectivity. © 2021 Elsevier B.V  

The ultrathin films of pyrochlore lattice along [111] direction provide a fertile ground for exploring topological states in oxide materials, where the electron correlations are strong and magnetically ordered states are favored. As a result of strong interactions, most of states are magnetic insulators with strong Dzyaloshinskii–Moriya and anisotropic spin interactions. We considered three types of heterostructures, a bilayer of triangular-kagome (TK), and two trilayers of triangular-kagome-triangular (TKT) and kagome-triangular-kagome (KTK) thin films. The ground states are magnetically ordered with the low-energy excitations, the magnons, characterized by nontrivial topology. While for TK... 

Three-dimensional macroporous fluorine-doped tin oxide (p-FTO) films were successfully deposited using commercial ink of FTO powder and SnCl2 salt via Dr. Blade method. Various features of p-FTO thin films were studied as a function of the ink composition and sintering temperature. The morphological studies corroborated formation of porous, uniform, and crack-free FTO films after annealing at 300 °C for 10 min in air. X-ray diffraction pattern demonstrated development of highly crystalline FTO films. The lowest sheet resistance of 47 Ω/□ was obtained for the p-FTO film with a thickness of 21 μm. The capacitance of thin p-FTO films was investigated using a three-electrode system and the... 

Three-dimensional macroporous fluorine-doped tin oxide (p-FTO) films were successfully deposited using commercial ink of FTO powder and SnCl2 salt via Dr. Blade method. Various features of p-FTO thin films were studied as a function of the ink composition and sintering temperature. The morphological studies corroborated formation of porous, uniform, and crack-free FTO films after annealing at 300 °C for 10 min in air. X-ray diffraction pattern demonstrated development of highly crystalline FTO films. The lowest sheet resistance of 47 Ω/□ was obtained for the p-FTO film with a thickness of 21 μm. The capacitance of thin p-FTO films was investigated using a three-electrode system and the... 

In-situ deposition of cupric oxide (CuO) thin films on fluorine-doped tin oxide is performed through a rapid microwave-assisted method. The duration of microwave (MW) irradiation is optimized in order to prepare efficient and stable photocathodes for photoelectrochemical (PEC) water splitting. We obtain CuO with a unique morphology consisted of intermingled nanosheets. We evaluate PEC performance of the photocathodes through Linear Sweep Voltammetry (LSV) and current stability analyses. The highest achieved photocurrent density is -1.15 mA.cm-2 at 0 V vs. RHE for the sample MW-irradiated for 60 min. This value is comparable or superior to several other CuO-based photocathodes prepared by... 

The effect of substitutional Li doping into NiOx hole transporting layer (HTL) for use in inverted perovskite solar cells was systematically studied. Li doped NiOx thin films with preferential crystal growth along the (111) plane were deposited using a simple solution-based process. Mott-Schottky analysis showed that hole carrier concentration (NA) is doubled by Li doping. Utilizing 4 % Li in NiOx improved the power conversion efficiency (PCE) of solar devices from 9.0 % to 12.6 %. Photoluminescence quenching investigations demonstrate better hole capturing properties of Li:NiOx compared to that of NiOx, leading to higher current densities by Li doping. The electrical conductivity of NiOx is... 

Experimental parameters have direct influences on materials properties and therefore their applications. The effect of plasma power on the properties of cobalt oxide thin films, prepared using plasma-enhanced chemical vapor deposition technique, on stainless steel substrates have been addressed in this paper. The structural, morphological, and compositional properties of these films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) technique. The XRD patterns demonstrated the growth of polycrystalline Co3O4 thin film with a cubic spinel structure such that the intensity of (511) and (311) peaks increase as the... 

In this study, biocompatible ceramic layers containing TiO2 and hydroxyapatite (HA) nanoparticles (TiO2/HA) were deposited on pure commercial titanium (Grade 2) by using plasma electrolytic oxidation and AC power supply. The coating process was carried out in five different solutions for various times at a current density of 500 mA cm−2. To achieve the optimum conditions for thickness and microstructure, the coating process was conducted in solutions with a 3 g L−1 concentration of HA nanoparticles. FESEM, XRD, and FTIR results showed that HA nanoparticles were successfully incorporated into the pores of the layer. Furthermore, the corrosion behavior of the coating layers in the simulated... 

Electrochemical exfoliation of graphite has recently attracted a big attention as a simple, fast and scalable method for the preparation of high quality graphene, but there are some drawbacks that hinder its application. Direct deposition is one of the most critical challenges that makes it difficult to deposit uniform, compact and large scale graphene thin films. This work develops a facile electrophoretic deposition route to fabricate exfoliated graphene (EG) film on Ag nanowires (NWs) networks with a controllable film thickness in nanometers scale. EG thin films are deposited with different applied potentials and times from an EG dispersion in N, N-dimethylformamide solvent. Since... 

Poly (vinyl alcohol)/graphene oxide (PVA/GO) gamma irradiated nanocomposite films and hydrogels were prepared. In composite films, GO was initially irradiated by gamma ray in order to improve interactions between GO and PVA. The film containing 1 wt-% GO was very strong where tensile modulus and tensile yield strength were 45 and 115% higher than those of pure PVA. In the second set of experiments PVA/GO hydrogels were made by irradiating PVA/GO suspensions by gamma ray at various doses. It was an interesting finding that GO increased the gel portion of hydrogels through contribution of H-bonds between PVA and GO. The hydrogels prepared at 20 kGy had remarkable water swelling ratio that... 

Surface turbulence during the filling of the mold triggers the entrainment of oxide films, which appears to be detrimental to the soundness of the final casting. Nonpressurized and bottom-gating systems have been employed in order to avoid such casting defects by reducing the surface velocity of the liquid metal. However, recent studies have shown that the melt front velocity in the mold entrance may exceed the critical value in the nonpressurized and bottom-gating systems. Therefore, a study was conducted on numerical simulation melt flow pattern in nonpressurized and bottom-gating systems. It was noted that the liquid metal enters the gate and then mold cavity with a higher velocity by... 

We demonstrate for the first time the application of p-NiFe2O4/n-Fe2O3 composite thin films as anode materials for light-assisted electrolysis of water. The p-NiFe2O4/n-Fe2O3 composite thin films were deposited on planar fluorinated tin oxide (FTO)-coated glass as well as on 3D array of nanospike (NSP) substrates. The effect of substrate (planar FTO and 3D-NSP) and percentage change of each component (i.e., NiFe2O4 and Fe2O3) of composite was studied on photoelectrochemical (PEC) water oxidation reaction. This work also includes the performance comparison of p-NiFe2O4/n-Fe2O3 composite (planar and NSP) devices with pure hematite for PEC water oxidation. Overall, the nanostructured... 

Transition metal oxides are being more frequently used as hole injection layer (HIL) in organic light emitting diodes (OLEDs), in place of polymer HILs such as PEDOT:PSS. The very thin films of the metal oxide HILs are usually deposited using vapor deposition, in order to create uniform films. Here, we report OLEDs fabricated using solution processed MoOx films as the HIL and super yellow as the emissive layer. The performance of the devices is comparable to PEDOT:PSS based devices, while the stability tests show the lifetime of MoOx-based devices is 4 × 106 h, about 40 times longer than PEDOT:PSS devices, at typical working condition. X-ray photoelectron spectroscopy (XPS) indicates both... 

Chitosan films have a great potential to be used for wound dressing and food-packaging applications if their physicochemical properties including water vapor permeability, optical transparency, and hydrophilicity are tailored to practical demands. To address these points, in this study, chitosan (CS) was combined with polyvinylpyrrolidone (PVP) and graphene oxide (GO) nanosheets (with a thickness of ∼1 nm and lateral dimensions of few micrometers). Flexible and transparent films with a high antibacterial capacity were prepared by solvent casting methods. By controlling the evaporation rate of the utilized solvent (1 vol % acidic acid in deionized water), self-organization of GO in the... 

Gold nanoparticles (AuNPs) of less than 50 nm diameter were electrodeposited from cyanide solution by pulsating electric current on modified copper and indium tin oxide (ITO) films coated on glass. Morphology, size, and composition of the deposited AuNPs were studied by X-ray photoelectron spectroscopy, atomic force microscopy, and field emission scanning electron microscopy. Effects of peak current density, pulse frequency, potassium iodide and cysteine on grain size, and morphology of the AuNPs were determined. Experiments showed that cathode current efficiency increases with the pulse frequency and the iodide ion. Size of the AuNPs increased with the current density. The number of... 

Ethylene-vinyl acetate-based nanocomposites with 18 and 28 wt% vinyl acetate were prepared via solution casting method. To improve the mechanical and barrier properties of ethylene-vinyl acetate, linear low-density polyethylene, and graphene oxide were introduced to matrix. The morphological studies indicated that the graphene oxide diffraction peak disappeared in all prepared nanocomposites, probably due to its exfoliation; also proper dispersion and good interaction between nanofillers and polymer matrix were achieved. By introducing low amount of graphene oxide into the matrix, the mechanical and thermal properties and oxygen permeability were improved especially for those with 28 wt%... 

Ethylene vinyl acetate/graphene oxide (EVA/GO) nanocomposite films were prepared via solution casting method. The morphological studies investigated using SEM and XRD methods and the results confirmed the formation of likely exfoliation structures and good interaction between matrix and fillers. The results of permeability measurements showed that films have good resistance against oxygen. Mechanical measurements revealed that Young’s modulus and tensile strength of EVA have improved with introducing GO because of proper dispersion of GO into matrix and good interaction between them; however, elongation at break decreased due to formation of strong and rigid polymer/filler network preventing... 

In this study, novel graphene oxide/chitosan nanocomposite coatings with long term drugeluting potential are presented. The coatings are fabricated by the facile and reproducible electrophoretic deposition technique. Analysis of the prepared films shows that the graphene oxide nanosheets are exfoliated in the chitosan matrix. Fourier-transform infrared spectrometry reveals polymer attachment to the carboxylic bonds of graphene oxide, providing a strong interaction and exfoliation of the nanolayers. In vitro viability assay by human osteosarcoma cells (MG-63) demonstrates that the nanocomposite films are highly biocompatible up to 30 wt% graphene oxide, but at higher concentrations a slight... 

The effects of melt quality and the placement of a filter in the filling system on Weibull distributions of tensile strength and elongation of Al-7%Si-Mg alloy castings were investigated. Three different combinations of melt quality and filtering were used: (a) unstirred, with filter in the filling system, (b) stirred to produce and entrain surface oxide films with no filter in the filling system to emulate poor initial melt preparation and melt handling, and (c) stirred and with a filter placed in the filling system. The results showed that the highest elongation and tensile strength values were obtained from the unstirred, filtered condition and lowest values were from stirred and... 

Tungsten oxide thin films (deposited by thermal evaporation or sol gel method) were used for photocatalytic reduction of graphene oxide (GO) platelets (synthesized through a chemical exfoliation method) on surface of the films under UV or visible light of the environment, in the absence of any aqueous ambient at room temperature. Atomic force microscopy (AFM) technique was employed to characterize surface morphology of the GO sheets and the tungsten oxide films. Moreover, using X-ray photoelectron spectroscopy (XPS), chemical state of the tungsten oxide films and the photocatalytic reduction of the GO platelets were quantitatively investigated. The better performance of the sol-gel tungsten...