Sharif Digital Repository

Microfluidic experiments have found wide applications in medical sciences and engineering, such as cell separation and focusing. In the present study, focusing and separation of particles with different sizes and densities were investigated by designing inertial microfluidic devices. The microfluidic channel is designed by analyzing the induced forces on the particles. In the designing process, the objective was to focus and separate the particles in the shortest length of the channel with the lowest possible cycles and high efficiency. The simulation is then used for analyzing the two proposed geometries to evaluate their particle separation and focusing ability, named convergent and... 

In the present study, the solubility of paracetamol in supercritical CO2 is measured at temperatures between 311 and 358 K and pressures between 95 and 265 bar. It was shown that the solubility of paracetamol through a static solubility measurement method was between 0.3055 × 10−6 to 16.3582 × 10−6 based on mole fraction. The obtained experimental solubility data revealed the direct effect of pressure on the paracetamol experimental data, while the temperature has a dual effect of both increasing and decreasing effect considering the shifting point known as crossover pressure which was measured to be around 110 bar for paracetamol. Besides, two theoretical approaches were applied to predict... 

In this research, for the first time, the effect of primary particles (boulders) and secondary particles (fines) in organic mixtures of coffee, black walnut hull, madder, and tea (which are cheap, abundant, and biodegradable) on the improvement of solar stills' daily efficiency is evaluated as an alternative to metal-based nanofluids. A laboratory still simulator is utilised under laboratory conditions to measure the organic mixture's behaviour accurately. Furthermore, the effect of the concentration of organic mixtures and the particle size of organic materials are investigated, as well as the effect of boulders and fines, independently. In addition, two identical solar still systems are... 

The growing environmental concerns, governmental regulations, and significant cost savings are the primary motivations for companies to consider the reuse and recovery of products in their inventory system. The previous research ignored several realistic features of reusable items inventory systems, such as the presence of multiple products and operational constraints. For the first time, this paper presents a new multiproduct economic order quantity inventory model for an inventory system of reusable products. The goal of the model is to determine the optimal replenishment quantity and reuse quantity of each item so that the system's total cost is minimized. Several operational constraints... 

Breast cancer is the most prevalent type of cancer in women; hence, many researches have been focused on developing effective treatment protocols. In this study, a novel nanocarrier was fabricated for gene and photothermal combination cancer therapy by conjugating histone methyltransferase complex subunit SET1 (hSET1) on reduced polydopamine coated graphene oxide nanosheets (rGO-PDA). The rGO-PDA nanocarriers provide higher near-infrared absorption and further integrating with hSET1 antisense as an anticancer gene that down-regulates the amount of hSET1 overexpressed and suppresses the proliferation of cancer cells. The nanoplatform was prepared by polymerizing of dopamine, a mussel adhesive... 

The present research comes up with a novel DNA-loaded poly-L-lysine (PLL)/hyaluronan (HA) nanocarrier (DNA-loaded PLL/HA NCs) for gene delivery applications, as a promising candidate for gene delivery into diverse cells. A straightforward approach was employed to prepare such a nanosystem through masking DNA-loaded PLL molecules by HA. Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), field emission-scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were used to analyse the interaction of the molecules as well as the physicochemical properties of the NCs. The NCs showed a negative charge of –24 ± 3 mV, with an average size of 138 ±... 

In recent years, the importance of capturing CO2 has increased due to the necessity of minimizing climate change and the detrimental effects of CO2 emissions from industrial processes. CO2 absorption, as one of the most mature carbon capture technologies, has been improved by introducing nanosized particles into liquid absorbents. Nanofluids have been the subject of interest in many studies recently due to their tremendous impact on absorption. This review comprehensively examines the CO2 absorption behavior for nanofluids through the investigation of different absorption systems. Potential mechanisms for improving the absorption/regeneration performance of nanoabsorbents as well as the... 

A series of nanohybrids using ZIF-8 in the presence of chitosan (CS) at various compositions (0.5–15 wt%) were synthesized. Thorough characterization exhibited that the morphology of the nanoparticles in terms of surface charge, particle size, specific surface area, and pore volume is significantly dominated by the CS content in the hybrid nanoparticles. Amongst the nanoparticles synthesized, a hybrid nanoparticle containing 2 wt% CS, named CS-ZIF-2, represented the largest positive zeta potential and smallest particle size. Moreover, adsorption experiments indicated that CS-ZIF-2 had considerable adsorption capacity against anionic dye (Congo Red, CR) compared with the individual ZIF-8 and... 

The employment of tissue engineering scaffolds in the reconstruction of the damaged bone tissues has shown remarkable promise since they significantly facilitate the healing process. Fabrication of highly porous biocompatible scaffolds with sufficient mechanical strength is still challenging. In this regard, polymers have been widely utilized to construct three-dimensional (3D) porous scaffolds due to their excellent processability and biocompatibility. However, insufficient mechanical strength and inappropriate degradation rate of the monophasic polymer scaffolds in the bone regeneration process, as the main challenges, limit their extensive clinical application. The incorporation of... 

Polymeric microspheres which can load biomolecules, cells and active agents play an important role in tissue engineering and drug delivery systems. The conventional double emulsion method has been frequently used to fabricate polymeric microspheres. However, this method has two major shortcomings: the complicated fabrication process which makes it difficult to predict the characteristics of the final microspheres while the size distribution of the microspheres has a wide range. In this study, we eliminate the shortcomings of the conventional double emulsion method and increase its performance without decreasing its high production rate. This can make the proposed modified method a promising... 

Herein, the facile and tunable technique for the preparation of novel multi-stimuli-responsive nanocomposites via RAFT polymerization for DOX delivery is reported. The influence of the molecular weight of pH- and thermo-sensitive poly (acrylic acid-co-NIPAM) (PNAx), as a macro-RAFT agent, on the nanocomposites size and drug release rate was investigated. The outcome of this study reveals that macro-RAFT agent with lower molecular weight can be attached to the surface of magnetic nanoparticles with higher content of polymeric layer than can macro-RAFT agent with higher molecular weight. Also, it was observed that the particle size, polymer grafting density, DOX loading capacity, and DOX... 

Silica nanoparticles, which have a broad range of sizes and specific surface features, have been used in many industrial applications. This study was conducted to synthesize monodispersed silica nanoparticles directly from tetraethyl orthosilicate (TEOS) with an alkaline catalyst (NH3) based on the sol–gel process and the Stöber method. A central composite design (CCD) is used to build a second-order (quadratic) model for the response variables without requiring a complete threelevel factorial experiment. The process was then optimized to achieve the minimum particle size with the lowest concentration of TEOS. Dynamic light scattering and scanning electron microscopy were used to analyze the... 

An efficient and selective drug delivery vehicle for cancer cells can remarkably improve therapeutic approaches. In this study, we focused on the synthesis and characterization of magnetic Ni1−x Cox Fe2 O4 nanoparticles (NPs) coated with two layers of methionine and polyethylene glycol to increase the loading capacity and lower toxicity to serve as an efficient drug car-rier. Ni1−x Cox Fe2 O4 @Methionine@PEG NPs were synthesized by a reflux method then charac-terized by FTIR, XRD, FESEM, TEM, and VSM. Naproxen was used as a model drug and its loading and release in the vehicles were evaluated. The results for loading efficiency showed 1 mg of Ni1−x Cox Fe2 O4 @Methionine@PEG NPs could load... 

In this study, the potential of using MIL-100(Fe) metal–organic framework (MOF) for loading and controlling the release of dacarbazine (DTIC) was evaluated for in vitro treatment of melanoma. The drug loading was performed during the green synthesis of MIL-100(Fe) in an aqueous media without using any harmful solvents, to obtain MIL-DTIC. The surface of this structure was then coated with polyethylene glycol (PEG) in the same aqueous solution to synthesize MIL-DTIC-PEG. The synthesized samples were characterized using various methods. Their release profile was studied in phosphate-buffered saline (PBS) and simulated cutaneous medium (SCM). The cytotoxicity of DTIC and its nano-MOF... 

Cardiac troponin-I (cTnI) is a well-known biomarker for the diagnosis and control of acute myocardial infarction in clinical practice. To improve the accuracy and reliability of cTnI electrochemical immunosensors, we propose a multilayer nanostructure consisting of Fe3O4-COOH labeled anti-cTnI monoclonal antibody (Fe3O4-COOH-Ab1 ) and anti-cTnI polyclonal antibody (Ab2 ) conjugated on Au-Ag nanoparticles (NPs) decorated on a metal–organic framework (Au-Ag@ZIF-67-Ab2 ). In this design, Fe3O4-COOH was used for separation of cTnI in specimens and signal amplification, hierarchical porous ZIF-67 extremely enhanced the specific surface area, and Au-Ag NPs synergically promoted the conductivity... 

Systemic chemotherapy has lost its position to treat cancer over the past years mainly due to drug resistance, side effects, and limited survival ratio. Among a plethora of local drug delivery systems to solve this issue, the combinatorial strategy of chemo-hyperthermia has recently received attention. Herein we developed a magneto-thermal nanocarrier consisted of superparamagnetic iron oxide nanoparticles (SPIONs) coated by a blend formulation of a three-block copolymer Pluronic F127 and F68 on the oleic acid (OA) in which Curcumin as a natural and chemical anti-cancer agent was loaded. The subsequent nanocarrier SPION@OA-F127/F68-Cur was designed with a controlled gelation temperature of... 

Paper-recycling mills are serious environmental threats due to their high water consumption and highly polluted wastewater. Particles are the most common issue of paper-recycling wastewater, and their removal is of particular interest for recycling. Rotating dissolved air flotation (RDAF) is a system for separating particles, and the mixing zone of this system, where particles collide with air bubbles, is the most important part. As a widely used system in various industries, RDAF has rarely been investigated in the literature in terms of its optimization and efficiency improve-ment. In general, RDAF processes are basically the same as those of conventional dissolved air flotation (DAF)... 

Simvastatin, a well-known antihyperlipidemic drug, has antibacterial activity against a broad range of bacteria, especially Staphylococcus aureus. In present study, a nanoemulsion gel-based formulation containing Simvastatin was developed for infected wound therapy. Therefore, different formulations of Simvastatin nanoemulsion were prepared. Based on droplet size, polydispersity index and zeta potential, the best nanoemulsion formulation containing Simvastatin was selected for development of nanoemulsion gel formulation of drug using carbomer 934 as gelling agent. Thermodynamic stability of Simvastatin nanoemulsion was assessed at different conditions. The in vitro antibacterial activity... 

Droplet-based microfluidics is an attractive approach for producing microgels due to its high potential to control the size and shape of the particles and precisely entrap the substances within the hydrogel matrix. However, the microfluidic generation of monodisperse microgels with desired structures is still challenging. Indeed, the rheological and interfacial properties of the immiscible fluids, as well as the adopted gelling strategy, play important roles in microfluidic methods. Herein, sodium alginate droplets with different concentrations are generated via a microfluidic device with a flow-focusing unit. Besides, a combined in situ and ex situ strategy is optimized to crosslink sodium... 

Molecular imaging (MI) can provide not only structural images utilizing temporal imaging techniques, but also functional and molecular data using a variety of newly developed imaging techniques. Nanotechnology’s application in MI has commanded a lot of attention in recent decades, and it has provided tremendous potential for imaging living subjects. In this study, D-glucosamine conjugated functionalized magnetic iron oxide nanoparticles (Fe3O4-PEG-DG NPs) were prepared and studied as magnetic resonance imaging (MRI) contrast agents. To evaluate their distribution, single-photon emission computed tomography (SPECT) is performed. Fe3O4 NPs are made using a well-known co-precipitation process...