Sharif Digital Repository

Removal of dissolved oxygen (DO) from water has gained much attention in recent decades to prevent different problems such as corrosion, bio-fouling, and performance degradation in many industries. The traditional physical and chemical methods for DO removal have found wide application in industries. However, physical methods have low efficiency and chemical methods often produce undesirable products. Therefore, catalytic reduction by hydrogen has been regarded by a variety of industries recently. In this study, catalytic reduction of DO from water is examined using membrane reactors. The mathematical model of this system is developed while considering the axial dispersion, membrane... 

The catalytic reduction of dissolved oxygen (DO) from water was examined using membrane reactors and a mathematical model that considers axial dispersion, membrane permeation, and chemical reaction. The model is solved in steady state mode and the effect of various parameters on the DO removal was assessed. The results of steady state mode were employed as initial conditions for solving the model in dynamic mode. The impact of operating conditions, e.g., water flow rate, DO concentration of influent water, hydrogen flow rate, and hydrogen pressure on the performance of the DO process was studied. Results of the dynamic simulation suggested that hydrogen pressure is the best option to be used... 

The oxygen-barrier properties of poly(lactic acid) (PLA)/poly(vinyl acetate-co-vinyl alcohol) [P(VAc-co-VA)] were investigated. P(VAc-co-VA)s with vinyl alcohol (VA) contents of 5, 10, and 15 mol % were prepared with the acid-catalyzed hydrolysis of poly(vinyl acetate). The obtained copolymers with various contents of VA were blended with PLA at 5/95, 10/90, and 15/85 compositions. Films of the blends were prepared by a solution-casting method with chloroform as the cosolvent. Although the blend with 5% VA in the copolymer appeared to be miscible, the blends with 10 and 15% VA content in the copolymer were immiscible, as verified by dynamic mechanical analysis. The oxygen-barrier properties... 

In this research, Plackett–Burman experimental design was used as a screening method to investigate seven processing factors in the preparation of new polyethersulfone based porous nanocomposite membrane. Polymer concentration, nanoparticle type, nanoparticle concentration, solvent type, solution mixing time, evaporation time, and annealing temperature are variables that were evaluated to fabricate mixed matrix membranes using the evaporation phase inversion method for gas separation. According to obtained results, polymer concentration, nanoparticle concentration, solution mixing time, and evaporation time processing factors had significant effects on gas permeation. In addition, the... 

In this study, crosslinked and non-crosslinked carboxymethylcellulose (CMC) membranes were prepared with different concentrations of polymer. Then, the permeability of pure CO2, N2, and CH4 was measured through these membranes in dry state to investigate the influence of polymer concentration and applied feed pressure on permeability and permselectivity. The permeability of CO2 through membranes was higher than the other gases. A comparison of permeabilities revealed that the permeability of N2, CO2, and CH4 increased on an average of 33, 40 and 20 percent, respectivly, by increasing the feed pressure from 6 to 10... 

We report a novel strategy for the synthesis of magnetic nanocomposite for highly efficient catalysis. Poly(glycidyl methacrylate) (PGMA) chains were grafted to the surface of magnetic nanoparticles (MNPs) through surface-initiated reversible addition-fragmentation chain transfer polymerization. Then, the oxirane rings in the PGMA chains were opened with 2,6-diamino pyridine (DAP) molecules as ligands to prepare the solid support. Finally, this magnetic nanocomposite was used for the immobilization of gold nanoparticles. Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, gel permeation... 

BACKGROUND: Hybrid distillation–membrane setups have attracted attention in recent years due to their lower energy usage for ethanol purification. Membrane separation processes operate without heating that reduces energy demand. However, it is somewhat challenging to select the optimal material and process for a membrane purifying ethanol, especially to get an ethanol purity of 99.99% with maximum recovery. RESULTS: In this study, three different configurations of hybrid distillation–membrane setups are proposed consisting of distillation–pervaporation/vapor permeation processes by considering ceramic, polymeric and composite membranes. The design of hybrid processes is performed by coupling... 

Removal of aromatic compounds from fuel is an essential requirement in new environmental policies. In the present study, poly(vinyl alcohol)/graphene oxide (GO) mixed matrix membranes were prepared and applied to the separation of toluene from iso-octane by pervaporation, considering the similarity and interaction between graphene and aromatics. The effects of crosslinking and GO content on separation efficiency have been investigated in detail. Owing to the high affinity of GO with toluene through s and π bonds, the selectivity of the membranes was increased by incorporating a low amount of GO. The results also indicated that noncrosslinked membranes have higher selectivity and permeation... 

In this study, the effects of the type and content of reactive diluents on the permeation/separation of carbon dioxide/nitrogen (CO2/N2) through acrylate-terminated polyurethane (APU)-acrylate/acrylic diluent (APUA) composite membranes was investigated. A series of APUs based on poly(ethylene glycol) (PEG)-1000 g mol−1, toluene diisocyanate, and 2-hydroxyethyl methacrylate was synthesized and then diluted with several reactive diluents. The results obtained from differential scanning calorimetry (DSC) and Fourier transform infrared analyses showed that the microphase interference of hard and soft segments increased with increasing reactive diluent content. Furthermore, with increasing alkene... 

The current investigation was to present composite membranes with strong interfacial adhesion between top polymeric selective layer and the bottom micro-porous support layer with appropriate gas permeation behavior and practically suitable processing characteristics. To this end, a series of acrylate-terminated polyurethanes (APUs) based on poly (ethylene glycol) (PEG) with different molecular weights (Mn) of 600, 1000, 1500, 2000 and 4000 g/mol, toluene diisocyanate (TDI), and 2-hydroxyethyl methacrylate (HEMA) were synthesized. Composite membranes were prepared with UV-curable acrylate-terminated polyurethane/acrylate diluent (APUAs) as selective layer and polyester/polysulfone (PS/PSF) as... 

Novel montmorillonite (Mt) chitosan/poly(vinyl alcohol) (PVA) nanocomposite electrospun nanofibrous membranes (ENM) were prepared and utilized for the treatment of colored wastewater. The Mt. with different mass percentages (0, 1.0, 2.0 and 3.0 mass%) was added to the membrane structure, and its effect on morphology, pore size, porosity, mechanical strength, and permeation properties of ENM were investigated. The fabricated membranes were used as affinity membranes for dye removal with ultrafast permeating adsorption. The results showed that incorporating Mt. as a reinforcing agent improved the nanocomposite ENM resistance to compaction. Young's modulus for the prepared membranes increased... 

The control of thin film nanocomposite (TFN) membranes cross-linking degree is an important factor to design new membranes and optimizing permeation characteristics. The Fe3O4 nanoparticle's based TFN membranes due to potentially added magnetic responsive properties to the membrane has a great importance in developing membrane architectures. Fe3O4/polyamide (PA) TFN membranes filled with nanoparticles in different sizes and concentrations have been synthesized. Cross-linking degree of PA layer characterized with Fourier transform spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods to evaluate size dependency of the cross-linking degree of PA layer network. Obvious... 

Photothermally heated and mesh-gridded membrane distillation (PHMD) system is proposed for desalination of high saline aqueous solutions. A triple-layered membrane, composed of a photothermal top nanofibrous layer containing polyacrylonitrile and dispersed carbon black nanoparticles and a polyvinylidene fluoride porous membrane supported on a nonwoven polyester, was prepared. A polypropylene mesh was used to hold the membrane. A 3D numerical simulation of the PHMD system was carried out by COMSOL and the appropriate length of the membrane module was determined. The effects of various operating parameters including solar radiation intensity on the permeate flux and thermal efficiency were... 

According to current researches, graphene oxide (GO) membranes show promising desalination properties due to ease of synthesis, low production cost, and high efficiency. There are several experimental works to study ionic sieving properties of GO membranes. However, it is difficult to characterize atomistic mechanism of water permeation and ion rejection by experimental approaches. On the other hand, there exist a few reports in which the atomistic picture of water permeation across GO membranes is investigated by means of molecular dynamics (MD) simulation. In the present work, in addition to water desalination, the atomic scale mechanism of ion rejection is studied using large scale MD... 

In this work, poly(vinyl) alcohol (PVA)/poly(ethylene) glycol (PEG) 600 g/mol cross-linked membranes with different alumina (Al2O3) content were synthesized. The membranes were then characterized by FTIR, TGA, DSC, SEM, mechanical strength and permeation properties for carbon dioxide and nitrogen gases at different operating temperatures. The FTIR results confirmed the acetal linkages of cross-linking at 1083 cm−1 and the presence of stretching and bending peaks of Al-O bond at 598 and 444 cm−1, respectively. TGA results showed that the thermal stabilities of the membranes improved with the addition of alumina particles. DSC analysis proved that the glass transition temperature of the... 

In this study, two new composite membranes with antifouling and anti-biofouling properties were prepared through the modification of commercial polyamide (PA) discs using combination of in-situ polymerization of polyacrylic acid (PAA) and grafting of two synthesized bi-plasmonic Au-Ag and Ag-Au photocatalysts. The synthesis and characterization of the photocatalysts in batch mode were discussed in details as primary studies. Two intense 405-nm and 532-nm lasers for Ag-Au and Au-Ag photocatalysts, respectively and a solar-simulated xenon lamp for both photocatalysts were applied for photodegradation studies and the results were compared. In addition, the effect of other parameters such as... 

A new multifunctional filtration membrane was prepared by twofold advantages of conventional polymeric-membrane as the supporting layer and magneto-plasmonic Ag-doped ZnO@Fe3O4/MWCNTs nanocomposite as the functional layer. Poly acrylic acid (PAA)-modified polyamide (PA) discs (PAA-PA) were applied to increase the hydrophilicity of prepared membrane and X-Ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used for characterization. The grafting yield of PAA in the pores and on the surface of PA was 17 wt.% and weigh difference between PAA-PA membrane before and after modifying with the photocatalyst was 8.7 mg. The amount of photocatalyst loading in the prepared...