Sharif Digital Repository

A low-cost carbon cloth is applied in perovskite solar cells (PSC) as a collector composite and degradation inhibitor. This study incorporates carbon fibers as a back contact in perovskite solar cells, which results in enhancement in all photovoltaic parameters. This material is suitable for large-scale fabrication of PSCs as it has shown an improved long-term stability when compared to the gold counterpart under elevated temperatures  

Thin-film solar cells based on hybrid organo-halide lead perovskites achieve over 22% power conversion efficiency (PCE). A photovoltaic technology at such high performance is no longer limited by efficiency. Instead, lifetime and reliability become the decisive criteria for commercialization. This requires a standardized and scalable architecture which does fulfill all requirements for larger area solution processing. One of the most highly demanded technologies is a low temperature and printable conductive ink to substitute evaporated metal electrodes for the top contact. Importantly, that electrode technology must have higher environmental stability than, for instance, an evaporated silver... 

Interfacial studies and band alignment engineering on the electron transport layer (ETL) play a key role for fabrication of high-performance perovskite solar cells (PSCs). Here, an amorphous layer of SnO2 (a-SnO2) between the TiO2 ETL and the perovskite absorber is inserted and the charge transport properties of the device are studied. The double-layer structure of TiO2 compact layer (c-TiO2) and a-SnO2 ETL leads to modification of interface energetics, resulting in improved charge collection and decreased carrier recombination in PSCs. The optimized device based on a-SnO2/c-TiO2 ETL shows a maximum power conversion efficiency (PCE) of 21.4% as compared to 19.33% for c-TiO2 based device.... 

All current highest efficiency perovskite solar cells (PSCs) use highly toxic, halogenated solvents, such as chlorobenzene (CB) or toluene (TLN), in an antisolvent step or as solvent for the hole transporter material (HTM). A more environmentally friendly antisolvent is highly desirable for decreasing chronic health risk. Here, the efficacy of anisole (ANS), as a greener antisolvent for highest efficiency PSCs, is investigated. The fabrication inside and outside of the glovebox showing high power conversion efficiencies of 19.9% and 15.5%, respectively. Importantly, a fully nonhalogenated solvent system is demonstrated where ANS is used as both the antisolvent and the solvent for the HTM.... 

In the past few years, organic–inorganic metal halide ABX3 perovskites (A = Rb, Cs, methylammonium, formamidinium (FA); B = Pb, Sn; X = Cl, Br, I) have rapidly emerged as promising materials for photovoltaic applications. Tuning the film morphology by various deposition techniques and additives is crucial to achieve solar cells with high performance and long-term stability. In this work, carbon nanoparticles (CNPs) containing functional groups are added to the perovskite precursor solution for fabrication of fluorine-doped tin oxide/TiO2/perovskite/spiro-OMeTAD/gold devices. With the addition of CNPs, the perovskite films are thermally more stable, contain larger grains, and become more... 

The effect of substitutional Li doping into NiOx hole transporting layer (HTL) for use in inverted perovskite solar cells was systematically studied. Li doped NiOx thin films with preferential crystal growth along the (111) plane were deposited using a simple solution-based process. Mott-Schottky analysis showed that hole carrier concentration (NA) is doubled by Li doping. Utilizing 4 % Li in NiOx improved the power conversion efficiency (PCE) of solar devices from 9.0 % to 12.6 %. Photoluminescence quenching investigations demonstrate better hole capturing properties of Li:NiOx compared to that of NiOx, leading to higher current densities by Li doping. The electrical conductivity of NiOx is... 

The quality of perovskite films plays a crucial role in improving the optoelectronic properties and performance of perovskite solar cells (PSCs). Herein, high-quality CsxFA1−xPbI3 perovskite films with different compositions (x = 0, 5, 10, and 15) are achieved by controlling the amount of cesium chloride (CsCl) in the respective FAPbI3 precursor solution. The effects of CsCl addition on the morphological and optoelectronic properties of the resulting perovskite films and on the performance of the corresponding devices are systematically studied. Introduction of CsCl into FAPbI3 shows a great potential to stabilize the α-FAPbI3 perovskite phase by forming CsxFA1−xPbI3 films with improved... 

Perovskite solar cells are well known for being low cost, solution-based, and efficient solar cells; however, the high price of the conventional hole-collector electrode (Spiro-OMeTAD/Gold) and the high price and complexity of depositing gold on large scales are major barriers against commercializing them. Herein, an effective carbon composite electrode is introduced for a low-cost perovskite solar cell with CuIn0.75Ga0.25S2 hole transport material to solve this problem. The carbon electrode is deposited by the doctor blade method using a paste composed of flakes of graphite, carbon black, and a kind of hydrophobic polymer (polystyrene or poly-methyl methacrylate). It is investigated how the... 

Titanium dioxide (TiO2) is an extensively used electron transporting layer (ETL) in n–i–p perovskite solar cells (PSCs). Although, TiO2 ETL experiences the high surface defect together with low electron extraction ability, which causes severe energy loss and poor stability in the PSC. In this study, a new intermediate layer consisting of gold nanoparticles functionalized with fully conjugated fullerene C60 derivative (C60-BCT@Au NPs) that enhances the interfacial contact at ETL/perovskite interface leading to a perovskite film with improved crystallinity and morphology is reported. Moreover, the studies demonstrate that the interface modification of the TiO2 ETL with C60-BCT@Au NPs... 

Interfacial engineering between the perovskite and hole transport layers has emerged as an effective way to improve perovskite solar cell (PSC) performance. A variety of organic halide salts are developed to passivate the traps and enhance the charge carrier transport. Here, the use of guanidinium iodide (GuaI) for interfacial modification of mixed-cation (Cs)x(FA)1−xPbI3 perovskite films, which results in the formation of a low-dimensional δ-FAPbI3-like phase on the 3D perovskite surface, is reported. The presence of this thin layer facilitates charge transfer at interfaces and reduces charge carrier recombination pathways as evidenced by enhanced carrier lifetimes and favorable interfacial... 

Herein, a new dopant-free organic material, PV2000, as a stable hole transporting layer (HTL) for the fabrication of stable and efficient perovskite solar cells (PSCs) is introduced. For this purpose, planar PSCs using a triple-A cation perovskite composition are fabricated and the commonly used 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD) HTL is replaced by dopant-free PV2000 polymer. The characterization results disclose that the PV2000 has a great thermal stability, good hole mobility, and suitable band alignment that matches well with the valence band of triple-A cation perovskite. After proper optimization of PV2000 film thickness, a planar PSC... 

Stability is the main challenge in the field of perovskite solar cells (PSCs). Finding new strategies is required to protect the PSCs from deteriorating agents such as humidity, heating, and illumination. Herein, a new electron transporting layer (ETL), i.e., CdSe/ZnS quantum dots (QDs), is proposed for the fabrication of efficient and stable PSCs. CdSe/ZnS QDs layer not only works as an ETL but also has downshifting property, which can improve both efficiency and stability of the PSCs. Using CdSe/ZnS QDs ETL with green emission, a PSC with maximum power conversion efficiency (PCE) of 18% is achieved. More importantly, the device shows great UV stability, much better than the device with... 

Vacuum deposition of transporting layers, especially the hole-transporting layer (HTL), is still a big challenge for the fabrication of large-area perovskite solar cells (PSCs). In this work, efficient and large-area PSCs are fabricated by thermal evaporation of all the layers. Poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) (PTAA) is used as the HTL, and a compact layer of PTAA with low thickness (2–10 nm) is successfully deposited using thermal evaporation. The optical and ultraviolet photoelectron spectroscopy (UPS) measurements prove that the evaporated PTAA has a great match with the single A-cation methylammonium triiodide perovskite film in terms of quenching effect and band... 

The fabrication of efficient perovskite solar cells (PSCs) using all-vacuum processing is still challenging due to the limitations in the vacuum deposition of the hole transporting layer (HTL). Herein, inverted PSCs using copper (II) phthalocyanine (CuPC) as an ideal alternative HTL for vacuum processing are fabricated. After proper optimization, a PSC with a power conversion efficiency (PCE) of 20.3% is achieved, which is much better than the PCEs (16.8%) of devices with solution-based CuPC. As it takes a long time to dissolve CuPC in the solution-based device, the evaporation approach has better advantage in terms of fast processing. In addition, the device with the evaporated CuPC HTL... 

In this research, inorganic copper thiocyanate (CuSCN) hole transport layer (HTL) was applied in conventional structure of perovskite solar cells (PSCs). Besides, mixed halides perovskite (Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3) was utilized as the light absorbing layer and deposited on FTO/compact TiO2 substrates through a one-step coating method in ambient condition. The mentioned perovskite is more stable against high temperature, high irradiation and humidity compared to commonly applied MAPbI3 perovskite. Nevertheless, the CuSCN could not be well dissolved in usual dipropyl sulfide solution and should be deposited for several times to achieve suitable thickness, this could reduce the... 

In this study, quick route-coating is practiced to substitute methyl ammonium (MA) cation with formamidinium (FA) at different ratios. Through optimizing the MA:FA ratio, a maximum power conversion efficiency (PCE) of 8.31% is achieved for holes transporting material-free MA0.8FA0.2PbI3 mixed PSCs with the JSC of 19.02 mA/cm2, VOC of 0.859 V and FF of 50.88%. Then, to improve the performance, stability and carrier transport dynamic, various additives (PVA, PVP, PEG and EC) are incorporated into the perovskite layer. The treatment of perovskites with additives has proved to cause significant changes in the surface roughness, charge accumulation, charge transport, charge transport resistance,... 

The present research sheds new light on the development of a triple-cation quasi-two-dimensional (2D) perovskite family with the general formula of (S1−xS′x)2[Cs0.05(FA1−xMAx)0.95]3Pb4(I1−xBrx)13, in which two spacers, namely 5-ammonium valeric acid iodide (S) and tetra-n-octylammonium bromide (S′) were simultaneously incorporated. Morphology, crystal structure, optical properties, photovoltaic performance, and internal resistances of such compound were systemically studied in comparison with an analogous single-cation 2D counterpart (i.e. (S)2(FA)3Pb4I13) as a reference. X-ray diffraction set forth that the films deposited based upon these compounds had a 2D perovskite crystal structure... 

Efficient electron transport layers (ETLs) play a pivotal role in the performance of solar cells. In recent years, Indium sulfide (In2S3) has been studied as a promising ETL in CuInGaS(e)2, Cu2ZnSnS(e)4, and perovskite solar cells. Despite several studies on spray-deposited In2S3, there is no complete experimental investigation on In2S3 thin films. The effect of the molar ratio of S/In and the type of indium precursor on the structural, morphological, optical, and electrical properties of sprayed-In2S3 layers has been studied. Films were characterized using x-ray diffraction, scanning electron microscopy (SEM), optical transmission (UV-Vis), Mott-Schottky analysis, four-point probe, and... 

Organic-inorganic halide perovskite solar cells have attracted considerable interest due to their high efficiency and low fabrication cost. Au and Ag are usually used as the back contact metals but have limitations such as Au is too expensive and Ag is unstable. Here, Pt, Au, Ni, Cu, Cr and Ag were studied as the back contact electrodes for perovskite solar cells. We looked at how the work function of metals can affect their photovoltaic characteristics. The compositional and electrical characterizations were studied using X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The general trend observed was that the shunt resistance and open-circuit voltage...