Sharif Digital Repository

In this work the enhancement of gas to hydrate conversion employing the nanographene oxide (NGO)-based nanofluid regarding CO2 capture and sequestration recovery is investigated. A new series of experiments are carried out at different pressures, temperatures, agitation intensities and NGO promoter concentrations by using a newly developed fully automated GTH (gas to hydrate) energy converter. According to the presented results at the 3 MPa and 275.15 K and in the presence of 30 ppm NGO, it is possible to reach a CO2 gas to hydrate conversion of 95% at a low impeller speed in less than 2.5 h, which is quite interesting from an energy consumption standpoint. The presented approach can have... 

High molecular weight polyacrylamide (PAM) nanoparticle dispersions are products with wide application possibilities, the most important of which is in petroleum industry such as drilling fluid and flooding agent in enhanced oil recovery. For that aim, it is necessary to achieve complete control of the final dispersion and polymer properties during the synthesis step. In this work, PAMs were synthesized by inverse emulsion polymerization of aqueous acrylamide solution in cyclohexane in the presence of emulsifier mixture of Span 20 and Span 80. We present a comprehensive study of the effects of variation of all important reaction conditions (agitation rate, reaction time and temperature,... 

The effect of operation variables, such as the H2/CO molar feed ratio, gas hourly space velocity (GHSV), temperature, and pressure, on the catalytic performance of the Co/Mn/TiO2 catalyst prepared at the Research Institute of the Petroleum Industry (RIPI) was investigated, and optimum reactor conditions were obtained to produce the maximum amount of light olefins. The catalyst was prepared by co-precipitation of Co and Mn phases in the presence of commercial TiO2 with maximum selectivity for ethylene and propylene production. It was found that the [H2]/[CO]=2/1, space velocity (GHSV) of 1800 h-1, 280°C temperature and 4 bar pressure were optimum operating conditions for the modified catalyst... 

Enhanced oil recovery (EOR) methods are mostly based on different phenomena taking place at the interfaces between fluid–fluid and rock–fluid phases. Over the last decade, carbonated water injection (CWI) has been considered as one of the multi-objective EOR techniques to store CO2 in the hydrocarbon bearing formations as well as improving oil recovery efficiency. During CWI process, as the reservoir pressure declines, the dissolved CO2 in the oil phase evolves and gas nucleation phenomenon would occur. As a result, it can lead to oil saturation restoration and subsequently, oil displacement due to the hysteresis effect. At this condition, CO2 would act as in-situ dissolved gas into the oil... 

Petroleum industry is moving toward enhancing oil recovery methods, especially water-based methods, including low salinity and smart water flooding which water with an optimized composition is injected into the reservoir for improving oil recovery. Injection of water into the target formation is also a common operation in geothermal energy production. As the water is being injected into the reservoir, pressure and temperature change along the well column and cause scale formation. Mineral scale precipitation and deposition is a common problem for water injection wells which reduces the effective radius of the wellbore and affects the injection efficiency. In this paper, modeling scale... 

Asphaltene precipitation and deposition causes many serious problems to the petroleum industry from the reservoir to the surface facilities. Therefore, it is important to bring it under control by finding a method to accelerate or slow down its precipitation and deposition. For achieving this purpose two parameters play an important role; onset point of the precipitation and amount of the deposited phase. When asphaltene precipitates, it is capable of depositing in the solution. After the deposition, the solution split into two phases; asphaltene-rich and asphaltene-lean. Determining the amount of the deposited phase needs to distinguish the interface between two phases. In this study, a... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

Energy Return on Investment (EROI) is an indicator of how efficient is an energy supply system. In the present study, the conventional approach of EROI assessment is extended to include the equivalent energy investment needed for offsetting the life cycle environmental impacts. Moreover, the issue of allocation of the invested energy among different by-products is addressed. The EROI of multiple products has been specified using different benchmarks of price, energy content, exergy content, and exergy costs. The application of the concept is demonstrated through a case study of an Iranian oil production unit. The overall conventional and environmentally-extended EROI values of the produced... 

This review aims to bring together the studies on petroleum reservoirs' sand production control in a comprehensive guide for the researcher to compare various methods for the chemical consolidation of sand. Sand production can be considered one of the major challenges in the petroleum production industry, causing severe operational issues. This study introduces various methods to control and prevent sand production in petroleum wells and evaluates their advantages and performance in tabular form. The use of chemical procedures is considered to be more efficient in counteracting the production and migration of sand. Various chemicals and polymers have been proposed for this purpose. These... 

Asphaltene precipitation is a major assurance problem posing significant technical and economic loss on petroleum industry. To tackle this issue, various treatments have been proposed and applied by industry. Amongst, inhibiting or retarding the asphaltene precipitation has been understood as the most efficient approach. In this regard, blending crude oil with chemical additives could appreciably heighten its stability. Surfactants, owing to amphiphilic nature, could keep asphaltene dissolved in crude oil by precluding self-tendency of those particles to making agglomerates. Despite importance of this subject, there is still lack of sufficient experimental data to evaluate effectiveness of... 

Although being expensive and time-consuming, petroleum industry still is highly reliant on well logging for data acquisition. However, with advancements in data science and AI, methods are being sought to reduce such dependency. In this study, several important well logs, CNL, FDC and PEF from ten wells are predicted based on ML models such as multilinear regression, DNN, DT, RT, GBoost, k-NN, and XGBoost. Before applying these models, depth matching, bad hole correction, de-spiking, and preprocessing of the data, including normalization, are carried out. Three statistical metrics, R2, RMSE, and PAP, are applied to evaluate the models' performance. Results showed that RF, k-NN, and XGBoost... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

As expounded, the precipitation and deposition of asphaltene particles in pipelines has been proved to be the most challenging flow assurance problem due to its unknown and complex behaviors. In this work, a new multicomponent, multiphase and dynamic tool was developed to model the aggregation and deposition of asphaltene particles in a bulk medium. The multiphase and dynamic asphaltene deposition tool, shortened as MAD-ADEPT is, in fact, a modified version of the previously developed ADEPT. The new tool was developed to make the asphaltene deposition and aggregation concepts in oil production wells more predictable. To tackle the complexity of the asphaltene problem, a bespoke algorithm was... 

Application of the fiber contained fluids has been extensively increased in many industries. In the petroleum industry, fibrous fluids are utilized for different applications. For instance, they have been applied in drilling operations for hole cleaning and cutting removal. In this article, the results of the studies performed on the application of Hydrated Basil Seeds (HBS) as the herbal eco-friendly fiber on hole cleaning and filtration control were presented. In order to investigate the application of HBS on hole cleaning, Polyacrylamide (PA) was added to the pure water to provide the base fluid and HBS at different concentrations were suspended in the base fluid and the effect of HBS on... 

One of the key open questions in the area of low or controlled salinity water flooding (LSWF or CSWF) is how the observed oil recovery at macro-scale (e.g. Darcy or core-scale) can the explained and what underlying microscopic mechanisms drive it. Thus far, the micromodel investigation of LSWF has been limited to sandstones, remaining challenging to apply to carbonates. In this paper we aim to i) extend the capability to fabricate a novel calcite micromodel using Iceland spar calcite crystal, ii) investigate the pore-scale mechanisms leading to oil recovery from carbonates. A target crude oil-brine-rock (COBR) system was first selected. To screen potential brines which can produce... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

Oil production strategies define to a large extent the future of the world crude oil market. This paper aims at modelling the long-term world crude oil supply and demand, as well as the global oil price. The main assumption is that non-OPEC and OPEC oil producers act as price-taker and strategic players respectively. The world crude oil demand is modelled as a linear price dependent function. We compare four scenarios to diagnose the OPEC’s supply behaviour: “cartel”, “oligopoly”, “mixed-cartel” and “mixed-oligopoly”. A Mixed Complementarity Problem, MCP, is used to find the Nash equilibrium point of each game scenario. The OPEC countries maximize their individual total discounted profits in... 

Wax precipitation may occur in production or transportation of crude oil form field which is a serious problem in petroleum industry. Flow assurance issues concerning wax precipitation make it necessary to develop a precise thermodynamic model to predict the wax appearance temperature and amount of precipitation at different conditions. In this work a new procedure has been proposed to characterize crude oil based on the SARA test considering the wax and asphaltene as single pseudo components. Two scenarios have been investigated for the survey of the crude oil characterization, with and without asphaltene pseudo component. Also, in this work, the Perturbed Chain form of the Statistical... 

Asphaltene deposition in porous media, wellbore and surface facilities has been a severe problem in petroleum industry which causes considerable remediation costs annually. Asphaltenes are heavy and polydisperse fractions of crude oil which are insoluble in n-alkanes such as n-heptane. In this work, three Iranian crude oils were prepared for titration experiments with n-pentane, n-heptane and n-dodecane at different solvent ratios and constant temperature. The experimental data were correlated by perturbed chain form of statistical associating fluid theory (PC-SAFT). The association of asphaltene molecules has been considered in this model with adjusting the uncertain parameters (such as...