Sharif Digital Repository

Membrane separator based on the polyvinylidene fluoride (PVDF) is prepared via the non-solvent-induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvent. The effect of various acetone/DMF ratios and non-solvent material on the physical and electrochemical properties of the separator is studied by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy (EIS), thermal stability, and linear sweep voltammetry (LSV). The charge-discharge studies are carried out by fabricating a lithium foil/polymer electrolyte membrane/LiFePO4 cell. The results show that with the change of solvent and non-solvent, the... 

Biomass, originates from plant- or animal-based materials with a huge potential to be reused. Here we report a simple, rapid and inexpensive method for preparation of modified biochars derived from the banana peel followed by their applications in pipette-tip micro solid-phase extraction (PT-µSPE). Due to the contribution of various effective parameters on modification of banana peel biochars (BPBs), Taguchi design was used to optimize activation temperature, activation repetition, treatment material and impregnation ratio. Efficiency of the prepared BPBs were studied by extraction of twelve various pesticides, as model analytes with an extended range of log P values (1.4–5.7), followed by... 

Separators are one of the most critically important components of lithium-ion batteries to ensure the safe performance of the battery. Commercial polyolefin separators have high thermal shrinkage and low electrolyte uptake, which confines the application of the battery. By using the thermally induced phase separation (TIPS) method, we successfully prepared HDPE/sepiolite nanocomposite separators with high thermal stability and electrolyte wettability. The sepiolite nanofibers are modified with the Vinyltriethoxysilane (VTES) as a coupling agent for better dispersion and interaction in the HDPE matrix. The purpose of fabricating this separator is to decrease the thermal shrinkage and... 

A series of polyurethane elastomers (PUEs) based on 4,4′-cyclohexamethylene diisocyanate (H12MDI)/1,2-ethanediol as hard segment with the soft segments having different molecular weights of polycaprolactone diols, were effectively polymerized by two step technique. The structural characterization was performed by FT-IR spectroscopy. The X-ray diffraction (XRD) technique was used to study the crystallinity and hydrophilicity of the prepared polymer films. It was found that crystallinity and hydrophilicity increased with increasing the chain length of soft segments. The effect of molecular weight of polyols on the contact angle, water absorption (%) and swelling behavior of the synthesized... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

In this work, gas dehydration and natural gas liquid (NGL) recovery by the Joule-Thomson (JT) process, were investigated using the computational fluid dynamics (CFD) modeling approach. Droplet behavior inside the separator was analyzed by particle tracing and moisture diffusion methods. The modified separator reduced the water content of natural gas from 0.008 to 0.0029 kg/m3. In addition, the separation efficiency was increased by addition of internal components. One of the added internal components was an inlet deflector. Among different inlet deflectors, the reversed type one exhibited the highest separation efficiency. The separation efficiency improved from 6 to 10% in the original... 

In the present work, with the focus on an environmentally–friendly approach, some gels were prepared by synthesizing amine–modified lignin, extracted from sugarcane bagasse, and further esterification and subsequent freeze–drying. These lignin–based gels were implemented as extractive phases in an online micro–solid phase extraction (μSPE) setup in conjunction with high performance liquid chromatography (HPLC) with UV detector. The developed method was used for analytical determination of valsartan and losartan in urine samples. To study the effect of the functionalization process, the efficiency of the unmodified lignin and the functionalized lignin were compared both in the absence and the... 

The potential utilization of encapsulation techniques in food, pharmaceutical and agricultural products preparation, presents a new alternative for complementary technologies such as targeting delivery vehicles and carriers for active food ingredients. Encapsulation could be accomplished by different techniques like: simple or complex coacervation, emulsification technique, phase separation, spray drying, spray chilling or spray cooling, extrusion coating, freeze drying, fluidized-bed coating, liposomal entrapment, centrifugal suspension separation, co-crystallization and molecular inclusion complexation. Encapsulation is a method by which one bioactive material or mixture of materials is... 

A cryogel–based semi–interpenetrating polymer network (Cryo–SIPN) was prepared in which conductive polymers such as polyaniline (PANI) and polypyrrole (PPy) were formed within the super porous network of acrylic acid cryogel. For completion of cryo-polymerization, all the constituent solutions were severely mixed and placed into the plastic straws and kept at -20°C and then the synthesized cyrogels were cut into the 1-cm length and freeze dried after washing with water. The Cryo–SIPN polymeric composite was applied in micro solid phase extraction (µSPE) of some selected antibiotic residues from various samples. The µSPE method combined with a high performance liquid... 

An efficient, green, novel and rapid vortex-assisted dispersive solid-phase extraction (VADSPE) technique was used for the preconcentration and determination of trace levels of Cu2+ followed by flame atomic absorption spectrometry. Graphene oxide (GO) was synthesized from graphite and then modified by pectic acid (poly-d-galacturonic acid, PA) to synthesize the pectic acid–graphene oxide (PA-GO) nanocomposite. The Fourier transform infrared spectrophotometry, field emission scanning electron microcopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis were used to characterize the synthesized GO-PA nanocomposite. By using VADSPE technique, PA-GO was used as an adsorbent for... 

In this study, we numerically determined the performance of a microscale separator comprising a lateral and a main channel to separate a two-phase flow. It was aimed to conduct continuous phase through the lateral channel and dispersed phase through the main channel. The continuous and dispersed phases were modeled as incompressible Newtonian fluids with the corresponding interface tracked by the phase-field model. The dynamics, including pressure fluctuations in the separator, were further examined. It was mechanistically demonstrated how the geometry of the separator modulates the phase separation. Further examined were the influences of various geometrical parameters on the performance of... 

In this study, the effects of the type and content of reactive diluents on the permeation/separation of carbon dioxide/nitrogen (CO2/N2) through acrylate-terminated polyurethane (APU)-acrylate/acrylic diluent (APUA) composite membranes was investigated. A series of APUs based on poly(ethylene glycol) (PEG)-1000 g mol−1, toluene diisocyanate, and 2-hydroxyethyl methacrylate was synthesized and then diluted with several reactive diluents. The results obtained from differential scanning calorimetry (DSC) and Fourier transform infrared analyses showed that the microphase interference of hard and soft segments increased with increasing reactive diluent content. Furthermore, with increasing alkene... 

The in vitro endothelial response of human umbilical vein endothelial cells was investigated on a poly (caprolactone)-based polyurethane surface vs an in situ TiO2-polyurethane nanocomposite surface, which has been produced as scaffolds for artificial vascular graft. The in situ synthesis of TiO2 nanoparticles in polyurethane provided surface properties that facilitated cellular adhesion, cell sensing, cell probing and especially cell migration. Cells on the nanocomposite surface have elongated morphology and were able to produce more extracellular matrix. All of these advantages led to an increase in the rate of endothelialization of the nanocomposite scaffold surface vs pure polyurethane.... 

In this survey, a reliable and applicable Y–Y shaped micro–channel in a microfluidic device was designed and manufactured. A number of micro–scaled hedges were precisely fabricated inside the micro–channel to facilitate the immobilization of synthesized core–shell Fe3O4@SiO2 magnetic nanoparticles (MNPs), functionalized by triethoxyphenylsilane (TEPS) by sol-gel technique. Both sample and reagents were introduced into the microfluidic device by a syringe pump to perform the extraction and desorption steps. The functionalized MNPs were characterized by transmission electron microscopy, X-ray diffraction spectroscopy and Fourier transform infrared spectroscopy. By adopting the strategy of... 

In this study, EVAc/PLA/organo clay nanocomposites were prepared via solution mixing method. The SEM images were used to investigate the morphology of nanocomposites revealing no phase separation or agglomeration of disperse phase in EVAc/PLA blends and nanocomposites. SAXS spectra confirmed the intercalated morphology of nanocomposites. Soil burial test were carried out and the rate of degradation of the samples were measured indirectly. Oxygen gas permeability of EVAc was slightly decreased by adding PLA to the matrix, when small loads of clay caused dramatic improvement in barrier properties. Melt rheological frequency sweep test illustrated the compatibility of EVAc with low contents of... 

We study the competition between spin and charge fluctuations of the extended Hubbard model with on-site and dipole-dipole interactions in a one-dimensional lattice. Using the extended two-particle self consistent (ETPSC) method, we find the corresponding expressions for spin and charge response functions. In this approach, the irreducible spin and charge vertices are a function of inter-particle distance (r) and wave-number (q). This theory allows us to determine the crossover temperatures and the dominant instability as a function of U and V. The phase diagrams are obtained for several effective particle densities: n = 0.5, n = 1 and n = 4/3. Each phase diagram (U − V − T space)... 

Smart bio-based shape memory polymers with high performance and fast response have the exciting potential to meet the growing need in biomedical applications. In this study, novel fast response UV-curable shape memory polyurethane acrylates (SMPUAs) comprising polycaprolactone diols (PCL-Diol), hexamethylene diisocyanate (HDI) and hydroxy-methyl methacrylate (HEMA) were synthesized by two-step bulk polymerization. Two series of PUAs with almost the same amount of hard segment content (HSC) were prepared with varying soft-segment molecular weight (2000, 3000, and 4000 g/mol) and different molar ratios of constituents. A mono-functional reactive diluent was used to control HSC and reduce the... 

Sample preparation for non-target analysis is challenging due to the difficulty in the extraction of polar and non-polar analytes simultaneously. Most commercial solid sorbents lack the proper comprehensiveness for extraction of analytes with different physiochemical properties. A possible key is the combination of hydrophobic polymer and hydrophilic surface functional groups in solid based extraction methods in order to generate the susceptibility for retaining both polar and non-polar analytes. To pursue this goal, in this study, four polar groups including [sbnd]NH 2 , [sbnd]NO 2 , [sbnd]COOH, and [sbnd]COCH 3 were chemically bound to Amberlite XAD-4 substrate in order to prepare a... 

In this study, a method was described for the extraction of three antibiotic residues from cow milk samples using a graphene oxide–starch–based nanocomposite. The prepared nanocomposites were employed as an extractive phase for micro-solid phase extraction of antibiotics from cow milk samples. The extracted antibiotics, i.e. amoxicillin, ampicillin and cloxacillin, were subsequently analyzed by high-performance liquid chromatography–ultraviolet detection (HPLC–UV). Important variables associated with the extraction and desorption efficiency were optimized. High extraction efficiencies for the selected antibiotics were conveniently achieved using the starch–based nanocomposite as the... 

In the present experimental study, the effect of operating parameters such as inlet and outlet pressure as well as inlet temperature on the mass separation capability of vortex tubes (VTs) for a gas mixture is investigated. Specifically, concentrating heavier components of a gas mixture in the hot outlet stream is considered. Proposing a semi-empirical index from the experimental study, the simulation of different arrangements of VTs, and the effect of recycling a portion of the hot outlet stream on its mass separation performance are investigated. Moreover, the proposed separation method by VTs is economically compared with commonly used methods by distillation columns and two-phase...