Sharif Digital Repository

A new photocatalyst (Ag-S/PEG/TiO2) was synthesized by adding polyethylene glycol (PEG) to an efficient Ag-S/TiO2 photocatalyst, to obtain a photocatalyst that is highly active under visible light. In addition to Ag-S/PEG/TiO2, Ag-S/TiO2 and pure TiO2 were prepared to compare their properties and activities. Specifically, the morphologies and microstructures of the nanophotocatalysts were characterized by means of powder X-ray diffraction (XRD), N2 adsorption-desorption measurements, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy,... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

A sonochemistry-based synthesis method was used to produce nanocrystalline nickel oxide powder with ∼20 nm average crystallite diameter from Ni(OH)2 precursor. Ultrasound waves were applied to the primary solution to intensify the Ni(OH)2 precipitation. Dried precipitates were calcined at 320 °C to form nanocrystalline NiO particles. The morphology of the produced powder was characterized by transmission electron microscopy. Using sonochemical waves resulted in lowering of the size of the nickel oxide crystallites. FT-IR spectroscopy and X-ray diffraction revealed high purity well-crystallized structure of the synthesized powder. Photoluminescence spectroscopy confirmed production of a wide... 

We substitute indium present in the CuInS2 ternary compound by iron and zinc using a facile one-pot synthesis method. The quaternary compound of CuIn1-xMxS2 (M = Fe and Zn) was synthesized by dissolving CuCl, InCl3, FeCl3, Zn(ac)2 and SC(NH2)2 as precursors in 1-octadecene, oleylamine and oleic acid as non-coordinating, coordinating and capping agent solvents, respectively. Oleic acid, oleylamine and thiourea were used respectively as a hard Lewis base, borderline Lewis base (in comparison with oleic acid) and soft Lewis base to form appropriate complexes. The complex formation, structure, and... 

CuO flower-like microcrystals, prepared by a facile template-free thermal method, showed incredible photocatalytic activity towards degradation of Acid Blue 92 (AB92), an organic wastewater, Escherichia coli and Staphylococcus aureus pathogenic bacteria under visible light. The products were well characterised by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscope (SEM), Fourier transform infrared (FTIR), photoluminescence spectroscopy (PL) and diffuse reflectance spectra (DRS) analysis methods. The XRD pattern of the products well confirmed the formation of copper oxide crystalline phase without any other impurities. The results of the photocatalytic... 

A mechanochemical method was applied to prepare bismuth oxybromide (BiOBr) nanoplates using bismuth nitrate pentahydrate and potassium bromide for 15 (A15), 30 (A30) and 60 (A60) minutes. Scanning electron microscopy studies showed that all the products were comprised of nanoplates. Aggregated nanoplates along with microblocks were observed for A15 and A30 and the entire morphology was not homogenous. The morphology of A60 was uniform and consisted of thin and isolated nanoplates. Evaluation of the X-ray diffraction patterns showed that the purity and crystallinity of the products improved by increasing the milling time. The energy dispersive X-ray analysis confirmed the high purity of the... 

Abstract: In this investigation, monodisperse CuGaS2 nanoparticles intended for use as visible-light-absorbing materials were synthesized using a facile one-step heating method that involved dissolving the precursors copper chloride, gallium acetylacetonate, and thiourea in a solvent consisting of either oleylamine alone or a combination of oleylamine, oleic acid, and 1-octadecene. The shapes of the resulting nanoparticles were either elongated, polygonal, or a mixture of both, depending on whether the crystal structure of the nanoparticles was predominantly wurtzite, predominantly chalcopyrite, or a more balanced mixture of both wurtzite and chalcopyrite (i.e., the nanoparticles were... 

CuO flower-like microcrystals, prepared by a facile template-free thermal method, showed incredible photocatalytic activity towards degradation of Acid Blue 92 (AB92), an organic wastewater, Escherichia coli and Staphylococcus aureus pathogenic bacteria under visible light. The products were well characterised by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscope (SEM), Fourier transform infrared (FTIR), photoluminescence spectroscopy (PL) and diffuse reflectance spectra (DRS) analysis methods. The XRD pattern of the products well confirmed the formation of copper oxide crystalline phase without any other impurities. The results of the photocatalytic... 

We decorated Zn-doped TiO2-nanoparticle-based photoanodes with carbon nanotube (CNT)-derived TiO2 nanotubes (TNs) to enhance the power conversion efficiency of dye-sensitized solar cells (DSCs). X-ray photoelectron spectroscopy analysis verified that Zn ions, in the range of 0 to 1 at %, were successfully doped into the TiO2 lattice. Field-emission SEM and TEM images of the TNs, as derived from the sol–gel template-assisted route, revealed that a uniform TiO2 coating with a thickness of 60 to 120 nm was deposited on the surface of the CNT template through a noncovalent route. We observed that the cell efficiency improved from 6.80 for pure TiO2 to 7.52 for 0.75 at % Zn-doped TiO2... 

In this study, initially graphene quantum dots (GQDs) were synthesized by an electrochemical technique and hierarchical porous TiO2 were made by a sol – gel method. Subsequently, GQDs/hierarchical porous TiO2 nanocomposites were prepared by two different methods for the purpose of comparison: spin coating (SC) and electrophoretic (EP) deposition. The GQDs/hierarchical porous TiO2 nanocomposites were characterized by various analytical methods including field emission scanning electron microscopy, atomic force microscopy, transmission electron microscopy, high resolution transmission electron microscopy, Fourier transform infra-red spectroscopy, photoluminescence spectroscopy and... 

A nanocomposite of Ce-doped TiO2-reduced graphene oxide (CedT/RGO) was synthesized to evaluate the synergistic effects of constituents on electrical and photoelectric properties. The nanoparticles of titania and CedT were synthesized via the sol-gel method. Then, RGO was prepared using a new version derived from the Hammer's method and hydrothermal methods. Finally, CedT/RGO nanocomposite was synthesized applying hydrothermal method. The nanoparticles and nanocomposite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray spectroscopy and elemental mapping. Then, diffuse reflectance and... 

In this paper, a combination of in-situ chemical synthesis and electrolysis methods was applied for the preparation of zinc oxide/graphene oxide quasi core-shell nanoparticles. Pure zinc oxide was also prepared using the same method at different temperatures. 100 °C was selected for synthesizing the ZnO/GO quasi core-shell (zinc oxide as a core and few layers of graphene oxide as a shell). The particle size was 15 ± 2 nm in all samples. In both processes, oxygen was the main reason for the connection between the core and the shell. XRD patterns also confirmed the formation of ZnO (with regular wurtzite structure) and ZnO/GO quasi core-shell structures. Raman spectroscopy results confirmed... 

Pt@Bi-TiO2 photocatalysts with different Bi (0–5 wt%) and Pt (0–2 wt%) contents were prepared by a two-step sol-gel and photo-deposition technique and were used in photo-reduction of CO2. The synthesized catalysts were characterized by X-ray powder diffraction (XRD), UV–Vis diffuse reflectance spectroscopy (DRS), scanning and transmission electron microscopy (SEM and TEM), nitrogen sorption measurement (BET), Raman spectroscopy, Electron paramagnetic resonance (EPR) spectroscopy and photoluminescence spectroscopy (PL). CO2 photo-reduction results revealed that the introduction of Bi into TiO2 structure and subsequent loading of Pt on its surface significantly increased the methane yield.... 

In this study, ZnO nanoparticles with 3 to 4 nm size and spherical shape have been prepared. For the first time, TEA (triethanolamine) as a surfactant has been used for the preparation of ZnO nanoparticles. The best concentration of each component was adjusted through comparison between different sol absorption spectra. The best sol regarding its optical property was subjected to analysis by photoluminescence spectroscopy. TEM micrograph and electron diffraction pattern of these particles were obtained to represent the morphology and crystalline phase of the particles, respectively. Experimental results have shown that the prepared zinc oxide nanoparticles by this method have higher... 

This research reports the preparation and examination of Cadmium Telluride (CdTe) Quantum Dots and doping CdTe QDs with Europium (Eu), Gadolinium (Gd), and Manganese (Mn) prepared in aqueous solution using TGA as a capping agent. Magnetic QDs (MQDs) are important agents for fluorescence (FL) /magnetic resonance (MR) dual-modal imaging due to their excellent optical and magnetic properties. Herein, the chemical bonds, structural, fluorescence, and magnetized properties of CdTe QDs and effect of Mn, Eu, and Gd ions doping on their properties were examined by X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTM), Energy-dispersive X-ray spectroscopy (EDX),... 

In this research, a facile, two-step synthesis of Fe3O4–LCysteine–graphene quantum dots (GQDs) nanocomposite is reported. This synthesis method comprises the preparation of GQDs via hydrothermal route, which should be conjugated to the LCysteine functionalized core–shell magnetic structure with the core of about 7.5-nm iron oxide nanoparticle and 3.5-nm LCysteine shell. LCysteine, as a biocompatible natural amino acid, was used to link magnetite nanoparticles (MNPs) with GQDs. X-ray powder diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray were used to investigate the presence and formation of MNPs, L Cysteine functionalized MNPs,... 

In this research, a facile, two-step synthesis of Fe3O4–LCysteine–graphene quantum dots (GQDs) nanocomposite is reported. This synthesis method comprises the preparation of GQDs via hydrothermal route, which should be conjugated to the LCysteine functionalized core–shell magnetic structure with the core of about 7.5-nm iron oxide nanoparticle and 3.5-nm LCysteine shell. LCysteine, as a biocompatible natural amino acid, was used to link magnetite nanoparticles (MNPs) with GQDs. X-ray powder diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray were used to investigate the presence and formation of MNPs, L Cysteine functionalized MNPs,... 

In this study, we designed, engineered and investigated two new thermally activated delayed fluorescence (TADF) dyes obtained from D–A–D′ type, consisted of 2-(9H-carbazol-9-yl)-3-(3-methoxy-9H-carbazol-9-yl)-9H-xanthen and 2-(3,6-di-tert-butyl-9H-carbazol-9-yl)-3-(3-methoxy -9H-carbazol-9-yl)-9H-xanthen. In these dyes, xanthen derivative and carbazole derivatives have played important roles as an acceptor and two unsymmetrical donor units. In addition, the photophysical properties of these dyes were evaluated by the UV–VIS absorption, photoluminescence spectroscopy and photoluminescence decay lifetime analysis in solution, initial dye, non-doped and doped solid state (neat–film) at...