Sharif Digital Repository

In this paper, different aspects of the behavior of 2×2 pile groups under liquefaction-induced lateral spreading in a 3-layer soil profile is investigated using large scale 1g shake table test. Different parameters of the response of soil and piles including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in the paper. In addition, distribution of lateral forces due to lateral spreading on individual piles of the groups is investigated in detail. The results show that total lateral forces on the piles are influenced by the shadow effect as well as the superstructure mass attached to the pile cap. It was also found that... 

Ground vibration due to pile driving is a long-lasting concern associated with the foundation construction industry. It is of great importance to estimate the level of vibration prior to the beginning of pile driving, to avoid structural damage, or disturbance of building occupants. In this study, an axisymmetric finite-element model that utilises an adaptive meshing algorithm has been introduced, using the commercial code Abaqus, to simulate full penetration of the pile from the ground surface to the desired depth by applying successive hammer impacts. The model has been verified by comparing the computed particle velocities with those measured in the field. The results indicate that the... 

Scour phenomenon around piles could endanger the stability of the structures placed on them. Therefore, an accurate estimation of the scour depth around piles is very important for engineers. Due to the complexity of the interaction between the current, seabed and pile group; prediction of the scour depth is a difficult task and the available empirical formulas have limited accuracy. Recently, soft computing methods such as artificial neural networks (ANN) and adaptive neuro-fuzzy inference system (ANFIS) have been used for the prediction of the scour depth. However, these methods do not give enough insight into the generated models and are not as easy to use as the empirical formulas. In... 

Jacket-type offshore platforms play an important role in oil and gas industries in shallow and intermediate water depths such as Persian Gulf region. Such important structures need accurate considerations in analysis, design and assessment procedures. In this paper, nonlinear response of jacket-type platforms against extreme waves is examined utilizing sensitivity analyses. Results of this paper can reduce the number of random variables and consequently the computational effort in reliability analysis of jacket platforms, noticeably. Effects of foundation modeling have been neglected in majority of researches on the response of jacket platforms against wave loads. As nonlinear response of... 

Liquefaction-induced lateral spreading has imposed severe damages to many important structures supported on pile foundations during past earthquakes. As a result, evaluation of pile response to lateral spreading is an important step towards safe and resistant design of pile foundations against this destructive phenomenon. Current paper aims to study the response of a group of piles subjected to liquefaction-induced lateral spreading using a large scale 1-g shake table test. General test results including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in this paper. In addition, distribution of lateral soil pressure on... 

It has been realized that the raft (mat) foundations are capable of bearing very large loads when they are assisted with a pile group. The contribution of both raft and piles to carry the surcharge loads is taken into account, considering the stiffness and strength of involved elements in the system, i.e. piles, raft and surrounding soil. The piles are usually required not to ensure the overall stability of the foundation but to act as settlement reducers. There is an alternative design in which, the piles are nonconnected from the raft to reduce the settlement, which are then known to be "settlement reducer non-connected piles" to increase the system stiffness. In this paper, two and three... 

Coupling the adjacent zones for seepage analysis in porous media needs compatibility and equilibrium equations (equality of potential on coinciding nodes and conservation of flowing mass between zones, respectively). When stretched coordinate transformation is applied to the anisotropic zones, the Dirichlet boundary conditions remain unchanged, but the Neumann boundary condition should also be transformed. Similarly in a zoned problem, for the interface between zones, compatibility equations remain unchanged during the transformation while the equilibrium equations should be transformed. In this paper, transformed Neumann boundary conditions and equilibrium equations for the interface of... 

In this paper, a fully coupled three-dimensional dynamic analysis is carried out to investigate the dynamic behavior of pile foundations in liquefied ground. A critical state bounding surface plasticity model is used to model soil skeleton, while a fully coupled (u- P) formulation is employed to analyze soil displacements and pore water pressures. Furthermore, in this study, variation of permeability coefficient during liquefaction is taken into account; the permeability coefficient is related to excess pore water pressure ratio. Results of a centrifuge test on pile foundations are used to demonstrate the capability of the model for reliable analysis of piles under dynamic loading. Then, the... 

Considerable attention has been devoted recently to vibration control using intelligent materials as sensor/actuator. An intelligent control technique using a neural network is proposed for vibration control of micro-cantilever beam with bonded piezoelectric sensor and actuator. Structure modal characteristic analysis is done to determine the optimal configuration of piezoelectric sensor and actuator. With the piezoelectric elements are surface-bonded near the same position to the fixed end of micro-cantilever beam, an optimal controller, linear quadratic Gaussian (LQG), and an intelligent strategy based on neural network are investigated. Finally, the simulation results are given to... 

In the present study, methods for improving the hydraulic performance of labyrinth side weirs in a rectangular channel are reported based on model experimentation. For this purpose different arrangements and configurations of groups of guide vane plates and piles in the side weir flow field were tested. Experiments were conducted on labyrinth side weirs of different lengths and sill heights fitted in the test section of a rectangular glass-walled channel. Depths of flow were measured in both longitudinal and crosswise directions at regular intervals and their profiles were studied. It was found that the discharge coefficient of the labyrinth side weirs under these conditions gave... 

Industrial air pollution from point and nonpoint sources of steel complexes has drawn increasingly more public attention in the past decades. Previous research efforts have been more concentrated on point sources of particulate emissions from these complexes. However, wind-induced particulate emissions from iron ore storage piles not only result in ambient air pollution but also increase economic adverse effects to the industry by loss of process raw materials. Experiments were conducted to assess the impact of wind speed and humidity on particulate emission rates from iron ore storage piles. A wind-generating system and specific iron ore, experimental piles (L:W:H of 30:11.5:5 cm) were... 

In this paper we consider the Bak, Tang, and Wiesenfeld (BTW) sand-pile model with local violation of conservation through annealed and quenched disorder. We have observed that the probability distribution functions of avalanches have two distinct exponents, one of which is associated with the usual BTW model and another one which we propose to belong to a new fixed point; that is, a crossover from the original BTW fixed point to a new fixed point is observed. Through field theoretic calculations, we show that such a perturbation is relevant and takes the system to a new fixed point  

In this paper we define some stochastic perturbations of the BTW model which make it into Manna model. These models have a continuous parameter p, where p = 0 and 1 correspond to the BTW and Manna models respectively. We have investigated the properties of the statistical observables of the waves of avalanches for various values of p. Our data supports the expectation of a crossover in such systems; at large scales Manna model is dominant. Therefore we find strong evidence in favor of the universality classes being distinct. Also it is observed that the BTW fixed point is unstable when Manna-type perturbation is added to the model  

Pile Foundations are used to transfer loads from superstructures to the underlying competent soil layers. Predicting pile bearing capacity is among the most interesting subjects for geotechnical engineers. In this study, a single pile is modeled in axisymmetric condition. The soil is considered to be a sandy soil. Then, results of the model were verified with a full scale pile load test performed by previous researchers. In order to take into consideration the real behavior of sandy soils, a variation of modulus of elasticity with respect to the changes in the mean effective stress was taken into account. The dependency of soil modulus to the mean effective stress makes the model more... 

Integral abutment bridges have many advantages over bridges with expansion joints in terms of economy and maintenance costs. However, in the design of abutments of integral bridges temperature loads play a crucial role. In addition, seismic loads are readily transferred to the substructure and affect the design of these components significantly. Currently, the European and American bridge design codes consider these two load cases separately in their recommended design load combinations. In this paper, the importance and necessity of combining the thermal and seismic loads is investigated for integral bridges. A 2D finite element combined pile-soil-structure interactive model is used in this... 

Post-deposition annealing effects on nanomechanical properties of granular TiO2 films on soda-lime glass substrates were studied. In particular, the effects of Na diffusion on the films' mechanical properties were examined. TiO2 photocatalyst films, 330 nm thick, were prepared by dip-coating using a TiO2 sol, and were annealed between 100 °C and 500 °C. Film's morphology, physical and nanomechanical properties were characterized by atomic force microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, differential thermo-gravimetric analysis, and nanoindentation. Contrary to expectations, the maximum film hardness was achieved for 300°C annealing, with a value of 0.69 ± 0.05 GPa.... 

Local scour around complex piers under steady clear-water condition was studied experimentally for a variety of configuration, including different sizes and shapes of complex piers. A total of 70 experiments were carried out. Three sets of experiments were performed over the entire range of possible pile cap elevations for complex piers with different geometrical characteristics. The collected data are used to quantify the pile cap elevations that maximize or minimize the local scour depth. Some of the available methodologies to estimate the maximum local scour depth around such complex piers are evaluated. The predictions of the scour depths improved by using the revised methods of... 

In this paper, three-dimensional turbulent flow field around a complex bridge pier placed on a rough fixed bed is experimentally investigated. The complex pier foundation consists of a column, a pile cap, and a 2×4 pile group. All of the elements are exposed to the approaching flow. An acoustic-Doppler velocimeter was used to measure instantaneously the three components of the velocities at different horizontal and vertical planes. Profiles and contours of time-averaged velocity components, turbulent intensity components, turbulent kinetic energy, and Reynolds stresses, as well as velocity vectors are presented and discussed at different vertical and horizontal planes. The approaching... 

A method for construction of large underground spaces based on a new pre-supporting system is introduced. In this paper Mansour Station, in Line 1 of Tabriz Metro (Tabriz Urban Railway Organization, TURO); Iran has been studied using this method. Mansour Station have some special characteristics such as shallow depth, soft surrounding soil, wide span and heavy street traffic, thus requires a method of underground construction that can control the stability of the underground space and the ground settlement. This method includes a pre-supporting system that is called Concrete Arch Pre-supporting System (CAPS). Construction of CAPS is mainly based on construction method of old Iranian small... 

Different concepts for modelling of soil-foundation in complete dynamic interaction analysis for a 110-m height 70-m span arched structure on 180 piles were investigated in this paper. The modelling approaches consisted of a sophisticated procedure to account for soil compliance and foundation flexibility by defining frequency-dependent springs and dashpots; namely, flexible-impedance base model. The results of this model were compared with those of the conventional modelling procedures; namely, fixed base model and flexible base model by defining frequency-independent springs. In the flexible-impedance base model, the substructure approach was employed through finite element modelling. To...