Sharif Digital Repository

Pure polypyrrole (PPy), PPy/Al2O3 and PPy/SiO2 nanocomposites synthesized galvanostatically using different polymerization charges. Electrochemical impedance measurements of pure polypyrrole revealed that the film thickness affected the impedance responses. The characteristic frequencies vs. film thickness that obtained using Cole-Cole plots showed that electrodeposition mechanism changed from 3D to 1D after nuclei overlapping for pure PPy. Analysis of the nanocomposites impedance spectrums revealed no changes during the film growth, i.e. deposition continues 3D even after nuclei overlapping. Scanning electron microscopy (SEM) confirmed the impedance results and showed that the morphology of... 

This article reviews the oil-soluble polymeric drag-reducing agents (DRAs) with an outlook to their large-scale application in petroleum industry. A general discussion on mechanism of the DR phenomenon and mechanical degradation of the drag reducers in turbulent flow is offered with an emphasis on the molecular parameters. Furthermore, low charge density associating polymers, as a new class of oil-soluble flow improvers, are described  

A four-step synthetic strategy was applied to achieve novel methacrylic monomers. 5-Norbornene-2,2-dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3-diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, 1H-NMR, and 13C-NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing... 

An eight-step synthetic strategy was followed to prepare a series of novel azobenzene-containing methacrylate monomers bearing spiroacetal-norbornene moiety and methylene spacers. Thus, the adduct 2, obtained from cyclopentadiene and acrolein, was converted to 1,3-diol 3. The diol was acetalized with nitrobenzaldehyde 4 under microwave irradiation to obtain nitro compound 5 that was then reduced to amino compound 6. Diazonium salt of 6 was coupled with phenol to produce phenolic compound 7 which was then reacted with n-dibromoalkanes (n=2, 4, 6, 8, 10) to yield bromo compounds 9a–e. Nucleophilic substitution reaction of the bromo compounds with lithium methacrylate produced the methacrylic... 

Polycaprolactone (PCL) composite films containing 5 wt.% bioactive glass (BG) particles of different sizes (6 μm, 250 nm, < 100 nm) were prepared by solvent casting methods. The ultra-fine BG particles were prepared by high-energy mechanical milling of commercial 45S5 Bioglass® particles. The characteristics of bioactive glass particles were studied by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and X-ray diffraction (XRD) methods. In vitro bioactivity of the PCL/BG composite films was evaluated through immersion in the simulated body fluid (SBF). The films were analyzed by FE-SEM, energy dispersive... 

In this paper application of Ionic Polymer Metal Composite (IPMC) as actuator in a deformable ring capable of locomotion is studied. Such a deformable ring moves as a result of gravitational force acting on its body when its shape changes. It can be used in exploration, search and rescue missions in future, where using conventional robots with rigid bodies and actuators is impossible. Large deformation induced by small stimulating voltage, low stiffness the sensing characteristics that in future work can be used in feedback control make IPMC a good choice for such an application. In this work first a model for IPMC is introduce that can be used in simulating deformation of IPMC in different... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

During miscible displacements in fractured porous media, one of the most important factors that plays a significant role in oil production is the matrix-fracture interaction. In this work, a series of hydrocarbon injection experiments have been performed on a fractured glass micromodel that was designed specifically to study matrix-fracture interaction. A high quality image analysis method was used to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that in the case of unit viscosity ratio, the injection rate increased the slope of recovery curve and consequently improved the final... 

Alkaline-Surfactant-Polymer flooding is one of the most novel chemical enhanced oil recovery methods in the petroleum industry. This method has attracted interest due to its remarkable advantages. In this work, a series of ASP floods are conducted on fractured/non-fractured carbonate rocks. The performance of the tests was investigated by various ASP floods consisting of five types of polymers, two surfactants and one common alkaline. ASP was flooded simultaneously and sequentially in four defined scenarios after water flooding. The results showed that although using hydrolysed polymers increases the recovery factor in the fractured medium, sulfonated polymers increase oil recovery even more... 

This work concerns a fundamental understanding of how heterogeneities induced by flow barriers and connate water affect the displacement efficiency of polymer floods, which has rarely been studied in the available literature. Here, a series of water/polymer injection experiments to heavy oil performed on five-spot glass micromodels containing randomly distributed shale structures is presented. It has been found that macroscopic efficiency of polymer flooding majorly depends on flow barriers distribution/configuration; shale content and geometrical characteristics; presence of connate water and wettability of medium. Microscopic pictures revealed that the main parts of connate water were... 

Gas injection into reservoirs can be used to increase oil recovery. However, reservoir heterogeneity and high gas mobility reduce sweep efficiency and decrease recovery. Using foam can reduce gas mobility and therefore increase sweep efficiency. Foam is thermodynamically unstable, so it is important to predict the foam stability. In order to understand the influence of oil presence on foam stability, static experiments performed on foam by varying the type and amount of added oil and molecular weight of added alkane. Also static foam properties have been investigated by varying the surfactant concentration, ionic strength, composition of different salts in the sample, and addition of polymer... 

Pyrrole was electro-polymerized on the surface of the glassy carbon electrode (GCE) coated with a thin film of carbon nanomaterials, including carbon nanotubes (CNTs), carbon nanoparticles (CNPs), nanodiamond-graphite (NDG) or graphite nanopowder (GNP). Morphology, thickness, stability and loading of the polypyrrole (PPY) film were significantly affected by the structure and morphology of the sub-layer of carbon nanomaterials. Electrochemical oxidation of atorvastatin (ATOR) was investigated. Under the optimized conditions, a significant increase in the peak current (compared to other modified electrodes and bare GCE) and a negative shift in the peak potential (compared to bare GCE) were... 

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

A metal-organic framework [Co3(BDC)3(DMF)2(H2O)2] was synthesized and structurally characterized. X-ray single crystal analysis revealed that the framework contains a 2D polymeric chain through coordination of 1,4-benzenedicarboxylic acid linker ligand to cobalt centers. The polymer crystallize in monoclinic P21 /n space group with a=13.989(3) Å, b=9.6728(17) Å, c=16.707(3) Å, and Z=2. The polymer features a framework based on the perfect octahedral Co-O6 secondary building units. The catalytic activities of [Co3(BDC)3(DMF)2(H2O)2]n for olefins oxidation was conducted. The heterogeneous catalyst could be facilely separated from the reaction mixture, and reused three times without significant... 

Supported palladium nanoparticles on Mn-carboxylate coordination polymer (Pd/MnBDC) were prepared using solution impregnation method. This new catalyst was characterized by XRD, SEM, TEM, EDX, XPS, FTIR and TGA analysis. The Pd/MnBDC exhibits efficient catalytic activity for the Mizoroki-Heck coupling reaction between iodobenzene and either aromatic or aliphatic terminal alkenes and reuses up to four runs without significant loss of activities  

Due to role of polymer in increasing sweep efficiency during oil recovery, much attention has been paid to the using polymer solutions in enhanced oil recovery methods. In spite of the existence of the great researches in this area, the role of nanoparticles in modification of the polymer performance in the presence of salts has not been examined before. Furthermore, there is no information about how the dispersed silica nanoparticles affect the heavy oil recovery during the polymer flooding in the presence of divalent cations. In this study, a series of polymer flooding experiments are performed in a quarter five-spot glass micromodel saturated with heavy oil. Solutions of polyacrylamide... 

(ZnO)1-x(CdO)x nanofibers were fabricated via electrospinning of polymer precursor by subsequent annealing in air. Field emission scanning electron microscopy (FESEM) showed the smooth and beadless nanofibers and X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed the ZnO hexagonal and the CdO cubic structure. Diffuse reflectance spectroscopy (DRS) showed the band gap energy reduction by increasing the amount of CdO in (ZnO)1-x(CdO)x nanofibers that resulted in the photocatalytic activity under the visible light for dye degradation. Under the UV light CdO acted as both electron and hole sink in the (ZnO) 1-x(CdO)x nanofibers and a possible photocatalytic activity... 

In this article, we report the first multiwalled carbon nanotube-polyelectrolyte gel containing vinylimidazolium-typed ionic liquid monomer as an absorbent of less-polar or nonpolar organic solvents. To prepare such MWCNT-polyelectrolyte gel, the modified MWCNTs with polymerizable vinyl groups on their surfaces were prepared and then underwent copolymerizations with dodecyl methacrylate and vinylimidazolium in the presence of AIBN as initiator, yielding a cross-linked polyelectrolyte. In order to estimate the compatibility between the solvents and the polymers, a series of vinylimidazolium-typed ionic liquid monomers ([Cnvim][X]) with different alkyl tail length (C6, C10 and C12) and counter... 

TiO2 nanoparticles were synthesized by hydrothermal assisted sol-gel technique. The preparation parameters including pH value, the amount of water, titanium tetra isopropoxide content, temperature and time of hydrothermal process were investigated by Taguchi statistical experiments to determine the influence of synthesizing variables on the optimal conditions and to realize the highest degree of crystallinity or smallest crystallite size. X-ray diffraction (XRD) analysis and direct band gap energy (Eg) values, measured via diffuse reflectance spectra (DRS), proved that all the samples consist of anatase as a unique phase. Transmission electron microscopy (TEM) and specific surface area... 

An extracting medium based on chitosan-polypyrrole (CS-PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS-PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS-PPy magnetic nanocomposite was compared with the CS-MNPs and Fe3O4 nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS-PPy magnetic...