Loading...
Search for:
polypyrrole
0.007 seconds
Total 56 records
Development of Nanostructured Lithium-Rich Cathode Material
, Ph.D. Dissertation Sharif University of Technology ; Sadrnezhaad, Khatiboleslam (Supervisor)
Abstract
This research is divided in three parts. In the first part of this research, we report the one-pot synthesis of carbonate-coated nanostructured LLO (Li2CO3@LLO) through a polyol-assisted method as a Li-ion battery cathode. Carbonate protects the cathode from adverse reactions with the electrolyte, also reduces the layered-to-spinel phase transition, thereby stabilizing the cathode structure. LLO nanostructure provides a fast Li+ diffusion. The target material exhibits excellent long-term stability with 77% capacity retention after 1000 cycles at 0.2C-rate. In the second part of research, Li(Na-doped)-Mn-Ni-O oxides were synthesized by different LiOH.H2O amount, type and amount of reducing...
Synthesis and Characterization of CuO Microflowers/Ppy Nanowires NCs as Anode Materials for Lithium-ion Battery
, M.Sc. Thesis Sharif University of Technology ; Sadrnezhad, Khatiboleslam (Supervisor)
Abstract
Novel Copper Oxide microflowers /Polypyrroles nanowire nanocomposites with various wight ratio have been synthesized.The synthesized CuO/Ppy NCs and Cuo microflowers are characterized by XRD, FT-IR, TGA, FESEM and EDX line analysis/elemntal mapping. The formation mechanism of CuO microflower and Ppy nanowires are also well explained.All syntesized samples have been used as as anode material for li-ion batteries in order to measure their electochemical lithium-ion storage properties. It is demonstrated that presence of Ppy nanowire with different weight ratio plays important role in lithium-storage properties of the hybrid CuO/Ppy NCs. With increase in the mass ratio of Ppy nanowire cyclic...
Constructing and Investigation of the Electrochemical Behavior of Nanocomposite of Conducting Polymers on Copper Hydroxide Nanotubes; Application to Determination of Glucose
, M.Sc. Thesis Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
A novel amperometric non-enzymatic glucose (NEG) sensor is designed by a facile preparation method. It is made by electrodeposition of Cu clusters and converting them to Cu(OH)2 nanotubes (Cu(OH)2NTs) arrays along with thin-film electro-polymerized of spindle-shaped polypyrrole (PPy@Cu(OH)2NTs), which have been doped by using sodium Benzene-1,3- disulfonate as an anion dopant. The electrochemical performance of the modified electrode toward glucose detection is investigated by various electrochemical methods. Under the optimized conditions, a significant electrochemical response improvement is observed toward the electro-oxidation of glucose on the surface of PPy@Cu(OH)2NTs electrode...
Theoretical Study of Adsorption of Organic Pollutants on Polypyrrole with Density Functional Theory (DFT)
, M.Sc. Thesis Sharif University of Technology ; Rahman Setayesh, Shahrbanoo (Supervisor)
Abstract
Phenolic compounds, which are one of the most dangerous compounds for the environment, are present in many effluents of various industries such as petrochemicals and pharmaceuticals, and the need to eliminate these compounds is increasingly felt. In this study, adsorption of three compounds of para-chlorophenol, para-nitrophenol and hydroquinone on polypyrrole adsorbent in the form of neutral, charged, copolymer with polyaniline and phosphorus-doped have been investigated using density functional theory (DFT). Calculations are performed at two levels of b3lyp/6-31+G(d,p) and wb97xd/631+G(d,p) for two different orientations of adsorbate molecules that the correlation-exchange function wb97xd...
Chemical Modification of Glassy Carbon Electrode by Carbon Nanostructures/Conductive Polymers Composites and Its Application in The Study of Electrochemical Behaviour and Determination of Salbutamol and Isoprenaline
, M.Sc. Thesis Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In the first part of thesis, the electropolymerization of pyrrole was performed in the presence of new coccine (NC) as a dopant anion on the surface of the electrode precoated with SWCNT. The modified electrode was used to study the voltammetric response of salbutamol (SAL). The results showed a remarkable increase in the anodic peak current of SAL in comparison to the bare GCE. The surface morphology PPY/CNT/GCE was thoroughly characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. Under the optimized analysis conditions, the modified electrode showed two linear dynamic ranges of 0.02 – 0.1 μM and 0.1-10 μM with a detection limit of 6 nM for the...
Electrochemical Sensors Based on Electrodes Modified with Composites of Carbon Nanostructures and Polypyrrole; Application to Electrochemical Investigations and Determination of Nifedipine and Tizanidine
, M.Sc. Thesis Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In the first part, the electropolymerization of pyrrole was performed in the presence of Titan Yellow (TY) as a dopant anion on the surface of the electrode precoated with CNTs. The modified electrode was used to study the voltammetric response of tizanidine (TIZ). A remarkable increase was observed in the anodic peak current of TIZ on the surface of the modified electrode relative to the bare GCE. The surface morphology PPY/CNT/GCE was thoroughly characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. Under the optimized analysis conditions, the modified electrode showed two linear dynamic ranges of 0.01 - 1 μM and 1-10 μM with a detection limit of 3 nM...
Electrospinning of Core-shell Nanofibers for Extraction and Determination of Pesticide Residues from Aquatic Media
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
Porosity and high surface area is a profound concept for creating advance materials. Nanofibers are an important class of nano materials which would be used as novel sorbents because of their high surface to volume ratio as a result of long lengths and nano-to-micro-scale diameters. Electrospining is a simple method for producing fine nanofibers from different meterials such as, polymers, composites and ceramics to prepare highly efficient sorbents. Moreover, electrospining has been developed for fabricating nanofibers with core-shell structures. These structures in compared with conventional fibers have gained higher attentions due to their high aspect ratios and flexiblity in surface...
Preparation and Investigation of Electrochemical Sensors for Determination of Pharmaceutical and Biological Compunds Based on Glassy Carbon Electrode Modified with Polypyrrole/Carbon Nanotube Composite
, M.Sc. Thesis Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In the recent years, conductive polymers are widely used in the design and construction of chemical and biological sensors.The polypyrrole due to features such as good thermal and chemical stability, ease of synthesis and better conductivity than other conductive polymers, atracts much attention. In order to modification of electrode surface,adhesiveand thin polymer films can be electropolymerized in the presence of organic or inorganic dopants on the surface of metal or carbon surfaces in aqueous or organic solutions. On the other hand carbon nanotubes by owing unique properties such as chemical stability and high electrical conductivity are good choice for electrod surface modification....
Development and Application of Carbon Nanomaterials-based Polymer Modified Electrodes for Electrochemical Determination of Pharmaceutical Compounds
, Ph.D. Dissertation Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In this thesis, in the first part, a promising electrochemical sensor was developed based on a layer by layer process by electropolymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the CNTs pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The results showed a remarkable increase in the anodic peak current of SUM in comparison to the bare GCE. In the second part, the electropolymerization of pyrrole was performed in the presence of Nitrazine Yellow (NY) as a dopant anion on the surface of the electrode precoated with CNTs. The...
, Ph.D. Dissertation Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In the first part, preparation of different kinds of polypyrrole/carbon composites and their application for drug analysis are described. In the first work, A very sensitive electrochemical sensor constructed from a glassy carbon electrode modified with a layer-by-layer MWCNT/doped overoxidized polypyrrole (oppy/MWCNT /GCE) was used for the determination of acetaminophen (AC) in the presence of codeine and ascorbic acid (AA). In comparison to the bare glassy carbon electrode, a considerable shift in the peak potential together with an increase in the peak current was observed for AC on the surface of oppy/MWCNT/GCE, which can be related to the enlarged microscopic surface area of the...
An Interior Needle Trap by Electropolymerized Pyrrole-based Coating for Headspace Solid-Phase Dynamic Extraction of Chlorobenzenes and Their Determination with Gas Chromatography-Mass Spectrometry
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
Chlorinated benzenes are a group of cyclic aromatic compounds which are used mainly as intermediates in the synthesis of pesticides and other chemicals. These compounds have harmful effects on human health, as on blood, kidneys, skin and eyes, and cause biological disorders and cancers. Chlorobenzenes have been ranked as priority pollutants by the US Environmental Protection Agency (EPA). The permissible level of these compounds for drinking water ranges between 2 μg/L and 1 mg/L. Hence determination of these compounds is of a significant importance. Solid Phase Dynamic Extraction (SPDE) of 5 types of chlorobenzenes (monochlorobenzene, 1,4-dichlorobenzene, 1,2,3-trichlorobenzene,...
Chemically Modified Electrodes Based on Conducting Polymers and Carbon Nanotubes: Application to Voltammetric Determination of Some Biological and Pharmaceutical Compounds
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhian, Saeed
(Supervisor)
Abstract
There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. In the first part of this thesis, a new type of modified electrodes, constructing multi-walled carbon nanotubes (MWCNTs) and polypyrrole is prepared in a layer-by-layer process. In this procedure, the glassy carbon electrode is casted first by a drop suspension of MWCNTs, leading to formation a thin film on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNTs pre-coated electrode. The modification...
An Interior Needle Electropolymerized Pyrrole-Based Coating for Headspace Solid-Phase Dynamic Extraction of Chlorophenols
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
Nowadays, the inside needle capillary adsorption trap (INCAT) technique as a solventless sample preparation approach and alternative extraction method derived from SPME is gaining rising attentions. The INCAT and needle-trap devices are inexpensive, robust, reusable, and are applicable for sampling and analyzing suitable organic compounds from many different sample matrices. Compared to the fragile silica-based SPME fiber, the needle device is nearly impossible to break mechanically. In addition, the extraction medium possesses quite a large extraction phase volume and a powerful preconcentration capability. Similar to SPME, needle-like devices are particularly convenient for automation and...
Solid Phase Dynamic Extraction Based on Polypyrrole Fiber for Determination Trace Amount of Atrazine in Aqueous Samples with GC-MS
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
This research is a bout a novel sample prepration procedure that used polypyrrole film into a stainless steel needle as a fiber coating for solid phase dynamic extraction(SPDE) with using a home-made SPDE devise and gas chromatography – mass spectroscopy for the extraction and detectionof Atrazine from the aqueous sample in direct mode of SPDE. Polypyrrole film was directly electrodeposited into the needle in a aqueous sodium dodecyl sulfonate solution with pecial set up in optimom condition of potential, time and concentration of polypyrrole. To enhance the sensitivity of the SPDE , variables affecting adsorption and desorption steps such as temperature,time,PH, flowrate and ionic strength...
Electrochemical determination of atorvastatin on nano-scaled polypyrrole film
, Article Bioelectrochemistry ; Vol. 98 , 2014 , pp. 1-10 ; ISSN: 15675394 ; Shahrokhian, S ; Sharif University of Technology
Abstract
Pyrrole was electro-polymerized on the surface of the glassy carbon electrode (GCE) coated with a thin film of carbon nanomaterials, including carbon nanotubes (CNTs), carbon nanoparticles (CNPs), nanodiamond-graphite (NDG) or graphite nanopowder (GNP). Morphology, thickness, stability and loading of the polypyrrole (PPY) film were significantly affected by the structure and morphology of the sub-layer of carbon nanomaterials. Electrochemical oxidation of atorvastatin (ATOR) was investigated. Under the optimized conditions, a significant increase in the peak current (compared to other modified electrodes and bare GCE) and a negative shift in the peak potential (compared to bare GCE) were...
A chitosan-polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen
, Article Analytica Chimica Acta ; Vol. 816 , 2014 , Pages 1-7 ; ISSN: 00032670 ; Roostaie, A ; Baktash, M. Y ; Sharif University of Technology
Abstract
An extracting medium based on chitosan-polypyrrole (CS-PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS-PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS-PPy magnetic nanocomposite was compared with the CS-MNPs and Fe3O4 nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS-PPy magnetic...
Investigation of the electrochemical behavior of mesalazine on the surface of a glassy carbon electrode modified with CNT/PPY doped by 1,5-naphthalenedisulfonic acid
, Article Electroanalysis ; Volume 25, Issue 11 , 2013 , Pages 2481-2491 ; 10400397 (ISSN) ; Hosseini, P ; Kamalzadeh, Z ; Sharif University of Technology
2013
Abstract
A glassy carbon electrode (GCE) was modified with a thin layer of multiwalled carbon nanotubes (MWCNTs) and subsequently, electrochemically deposited poly-pyrrole. The electrochemical behavior of mesalazine was studied on the surface of the modified electrode by applying linear sweep voltammetry (LSV). The electropolymerization process and the electrochemical response toward mesalazine were investigated in the presence of different aromatic anion dopants including, benzenesulfonic acid (BSA), 1,3-benzenedisulfonic acid (1,3-BDSA), 1,5-naphthalenedisulfonic acid (1,5-NDSA) and new coccine (NC). By using 1,5-NDSA as dopant, a significant increase (~418 times) in the peak current of mesalazine...
Electrochemical determination of clozapine on MWCNTs/new coccine doped ppy modified GCE: An experimental design approach
, Article Bioelectrochemistry ; Volume 90 , 2013 , Pages 36-43 ; 15675394 (ISSN) ; Kamalzadeh, Z ; Hamzehloei, A ; Sharif University of Technology
2013
Abstract
The electrooxidation of clozapine (CLZ) was studied on the surface of a glassy carbon electrode (GCE) modified with a thin film of multiwalled carbon nanotubes (MWCNTs)/new coccine (NC) doped polypyrrole (PPY) by using linear sweep voltammetry (LSV). The pH of the supporting electrolyte (D), drop size of the cast MWCNTs suspension (E) and accumulation time of CLZ on the surface of modified electrode (F) was considered as effective experimental factors and the oxidation peak current of CLZ was selected as the response. By using factorial-based response-surface methodology, the optimum values of factors were obtained as 5.44, 10 μL and 300 s for D, E and F respectively. Under the optimized...
Polypyrrole/polyamide electrospun-based sorbent for microextraction in packed syringe of organophosphorous pesticides from aquatic samples
, Article Journal of Separation Science ; Volume 35, Issue 1 , December , 2012 , Pages 114-120 ; 16159306 (ISSN) ; Ayazi, Z ; Aghakhani, A ; Alipour, N ; Sharif University of Technology
Abstract
A novel method based on microextraction in packed syringe (MEPS) as sample preparation technique coupled off-line with gas chromatography-mass spectrometry was developed using electrospun nanofibers as sorbent. For electrospinning of polypyrrole/polyamide-based nanofiber, a homogeneous solution containing nylon 6, ferric chloride and pyrrole monomer was prepared and then was drawn into a 2.5-mL syringe. By applying a voltage of 13akV between the needle of the syringe and an aluminum-foil collector, the nanofibers could be formed on the surface of the collector. The prepared sheet was used as the sorbent for MEPS to analyze some selected organophosphorous pesticides. Important parameters...
Electrochemical preparation of over-oxidized polypyrrole/multi-walled carbon nanotube composite on glassy carbon electrode and its application in epinephrine determination
, Article Electrochimica Acta ; Volume 57, Issue 1 , 2011 , Pages 132-138 ; 00134686 (ISSN) ; Saberi, R. S ; Sharif University of Technology
Abstract
A composite film constructed of surfactant doped over-oxidized polypyrrole and multi-walled carbon nanotube was prepared on the surface of glassy carbon electrode by the electro-polymerization method. Surface characterization of the modified electrode was performed by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectrometry. The investigations have been proved that the over-oxidation of the modifier film resulted in a porous thin layer that improves the interlayer diffusion mechanism for the electroactive species. On the other hand, the negative charge density on the surface of the electrode excludes the negative analytes (e.g. ascorbate and Fe(CN)63?/4?)...