Sharif Digital Repository

The discrete fracture network (DFN) and Multiple-Continua concept are among the most widely used methods to model naturally fractured reservoirs. Each faces specific limitations. The recently introduced recovery curve method (RCM) is believed to be a compromise between these two current methods. In this method the recovery curves are used to determine the amount of mass exchanges between the matrix and fracture mediums. Two recovery curves are assigned for each simulation cell, one curve for gas displacement in the presence of the gravity drainage mechanism, and another for water displacement in the case of the occurrence of the imbibition mechanism. These curves describe matrix-fracture... 

Particle capture at porous media in cross-flow microfiltration is studied to investigate permeability reduction as a function of membrane pore size and particle size distribution. A new model in pore scale and its pertinent mathematical expressions, which consider pore and particle size distribution, are provided. Permeability reduction of the membrane because of size exclusion during particulate suspension flow was predicted using the developed model. It is assumed that the size exclusion is the dominant mechanism of particle retention causes pore blocking and permeability reduction in the porous media.The exact analytical solution of the stochastic model for size exclusion is used to... 

Reservoir permeability is an important parameter that its reliable prediction is necessary for reservoir performance assessment and management. Although many empirical formulas are derived regarding permeability and porosity in sandstone reservoirs, these correlations cannot be accurately depicted in carbonate reservoir for the wells that are not cored and for which there are no welltest data. Therefore, having a framework for estimation of these parameters in reservoirs with neither coring samples nor welltest data is crucial. Rock properties are characterized by using different well logs. However, there is no specific petrophysical log for estimating rock permeability; thus, new methods... 

Three distinct methods, namely, the spectral density, the multifractal random walk approach, and the multifractal detrended fluctuation analysis are utilized to study the properties of four distinct types of well logs from three oil and gas fields, namely, the natural gamma ray emission, neutron porosity, bulk density, and the sonic transient time logs. Such well logs have never been analyzed by the methods that we utilize in the present study. The results indicate that the well logs exhibit multifractal characteristics, and the estimated Hurst exponents by the three methods are close to each other. Using multifractal detrended fluctuation analysis and the shuffled and surrogated data, we... 

A high silica CHA-type membrane was synthesized by the in-situ crystallization method on a disk like α-alumina porous support to separate both acid (H2S, CO2) gases from methane. The membrane showed a permeance of 3.39×10-8mol/m2sPa for pure CO2with CO2/CH4 ideal selectivity of 21.6 at 303K and 100kPa pressure difference across the membrane. The membrane was also tested with N2 and O2 pure gases indicating a small O2/N2 selectivity of 1.2-1.4, which shows that this type of membrane is not suitable for O2/N2 separation. The membrane performance was also analyzed by binary (CO2-CH4) and ternary (H2S-CO2-CH4) gas mixtures, with compositions near the real sour natural gas (CO2: 2.13mol%, H2S:... 

In this work, asphaltene adsorption in a sandstone core sample under dynamic conditions and during miscible CO2 injection was studied using live oil sample which is close to real conditions in petroleum reservoirs. In order to investigate of damage in sandstone core sample by the deposited material such as asphaltene, the morphology analysis of sandstone core sample using scanning electron microscopic method was studied. Also analyses of the adsorbed material in sandstone core sample by Soxhlet extraction using an azeotrope mixture and with SARA method were performed. The experimental results show that by increasing the flow rate of injected CO2, the amount of asphaltene in retained material... 

Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil-polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane-GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell... 

In this article, dynamic core flood experiments in miscible CO2 condition were carried out to investigate core damage due to asphaltene deposition. Carbonate and sandstone cores were used to study of effect of core characteristic on permeability and porosity reduction. The experimental results show asphaltene deposition preferentially in sandstone core type takes place in the first half of the core while in the carbonate one it occurs in the second half. In spite of asphaltene content measurement results (IP-143) that show higher asphaltene deposition in sandstone cores, permeability impairment compared to the carbonate one is severe. Also, permeability-porosity reduction models are affected... 

The correct quantification of porosity is essential in all studies pertaining to porous media. A host of existing works employs a constant, bulk value for porosity, even when the porous sample is attached to a free fluid. Since the volume fraction of the solid matrix near the interface region differs from that in the core, the porosity undergoes a spatial variation. Here we present a novel relation for the porosity as a function of depth below the interface, using the concept of surface roughness applied on the classical definition of open porosity. This relation has been verified by computational modeling as well as non-invasive laser experiments. It has been shown that this depth-dependent... 

Many potential therapies are currently being studied that may promote neural regeneration and guide regenerating axons to form correct connections following injury. It has been shown that adult neurons have some limited regenerative capabilities, and the lack of connection formation between neurons is not an intrinsic inability of these cells to form axons after being damaged, but rather the inhibitory microenvironment of the injured tissue prevents regeneration. In this study, the polarization and chemotaxis of neuronal stem cells (NSC) in response to quantified gradients of nerve growth factor (NGF) was examined. To accomplish this, a microfluidic device was designed and fabricated to... 

In this research, a finite element model was developed in order to simulate the two-step residual stress distribution of a thermal barrier coating system, considered to be used in diesel engine cylinder head, with a real roughness and real porosity. Two steps including the bond coat and the top coat deposition processes were taken into account. The real geometry of coating layers, including the roughness and the porosity, was also considered based on a scanning electron microscopy image. Then, effects of the convective heat transfer coefficient and initial substrate and substrate/bond coat preheating temperatures on the residual stress were studied. Obtained results illustrate that the... 

A solution of polyamide (PA) containing polyethylene glycol (PEG) as a side low-molecular-weight polymer was electrospun. After synthesizing the PA-PEG nanofibers, the constituent was subsequently removed (modified PA) and confirmed by Fourier transform infrared spectroscopy. The scanning electron microscopy images showed an average diameter of 640 and 148 nm for PA and PA-PEG coatings, respectively, while the latter coating structure was more homogeneous and porous. The extraction efficiencies of PA, PA-PEG, and the modified PA fiber coatings were assayed by headspace solid-phase microextraction of a number of chlorophenols from real water samples followed by their determination by gas... 

Porosity and specific surface are two prominent factors in describing the hydraulic properties of porous media. Determination of these two important parameters leads to identify the capability of porous media to conduct the fluids. In the present study, a new relationship between porosity and specific surface of sandstones has been developed. Micro-CT data from 10 types of sandstones has been utilized in order to present a porosity-specific surface correlation. This correlation also contains the average grain radius of each rock obtained by image processing algorithms. Finally, the correlation is tested on the provided data to evaluate its precision. The simplicity and applicability of the... 

In this work, two-membrane distillation (MD) modes, direct contact MD, and sweeping gas MD were investigated for synthesized and real (Persian Gulf) seawater desalination. A commercial PTFE membrane with 0.22 μm pore size was characterized (using atomic force microscopy and scanning electron microscopy) and was used for experiments. A multipurpose plate and frame MD module was used for desalination experiments. The effects of various operating conditions and MD module design, as well as feed type on the permeation flux have been studied. The feed temperature was found to be the most effective operating parameter. The flow rate in both sides of the MD module was found to be effective;... 

Metallic foams are a class of lightweight materials that show high potentials for different industrial applications such as automotive and aerospace engineering. However, many factors have prevented metallic foams from being fully utilized in industrial applications. One main factor is that the influences of the porous structure on the mechanical properties of metallic foams are not well known yet. In this paper, a finite element model was used to analyze monodisperse closed cell aluminum foam in order to determine the relationship between its elastic modulus, porosity and pore diameter. A nonlinear relationship was found between the foams porosity, pore diameter and modulus of elasticity.... 

The present study investigated the effects of initial Hydrogen level and cooling rate on ultimate tensile strength of commercial Al-A319 alloys. Three hydrogen levels (0.01, 0.2, and 0.41 mL/100 grams of melt) and five cooling rate were studied. Total of 45 tensile test bars was prepared (three hydrogen levels × five cooling rate × three repeats). The UTS of the samples was determined though uniaxial tension tests. Furthermore, the microstructures of the samples were studied by standard metallographic technique and image analysis software. Finally the relationship between UTS and microstructurai features—SDAS and fraction of porosity (Fp%)—of the alloys was investigated.Results of tensile... 

We report improved performance of Li-ion polymer batteries through advanced gel polymer electrolytes (GPEs). Compared to solid and liquid electrolytes, GPEs are advantageous as they can be fabricated in different shapes and geometries; also ionic properties are significantly superior to that of solid and liquid electrolytes. We have synthetized GPE in form of membranes by trapping ethylene carbonate and propylene carbonate in a composite of polyvinylidene fluoride and N-methylpyrrolidinore. By applying phase-transfer method, we synthetized membranes with micro-pores, which led to higher ionic conductivity. The proposed membrane is to be modified further to have higher capacity, stronger... 

Controlling topographic features at all length scales is of great importance for the interaction of cells with tissue regenerative materials. We utilized an indirect three-dimensional printing method to fabricate polymeric scaffolds with pre-defined and controlled external and internal architecture that had an interconnected structure with macro- (400-500 μm) and micro- (∼25 μm) porosity. Polycaprolactone (PCL) was used as model system to study the kinetics of tissue growth within porous scaffolds. The surface of the scaffolds was decorated with TiO2 and bioactive glass (BG) nanoparticles to the better match to nanoarchitecture of extracellular matrix (ECM). Micrometric BG particles were... 

This work was carried out to investigate the effect of different Ti concentrations as a modifying agent on the microstructure and tensile properties of an in-situ Al-15 pctMg2Si composite. Cast, modified, homogenized small ingots were extruded at 753 K (480°C) at the extrusion ratio of 18:1 and ram speed of 1 mm/s. Various techniques including metallography, tensile testing, scanning electron microscopy were used to characterize the mechanical behavior, microstructural observations, fracture mechanisms of this composite. The results showed that 0.5 pctTi addition and homogenizing treatment were highly effective in modifying Mg2Si particles. The results also exhibited that the addition of Ti... 

A new facile strategy for fabrication of high surface area electrode in the form of mixtures of coated carbon nanotubes (CNTs) and TiO2 nanoparticles with various weight ratios is reported. The so-called polymeric gel process was used to deposit thick film containing uniform distribution of TiO2 nanoparticles and coated CNTs with high porosity by dip coating for dye-sensitized solar cells (DSSCs) applications. Based on simultaneous differential thermal analysis, the minimum annealing temperature to obtain inorganic- and organic-free films was determined at 500°C. X-ray diffraction analysis revealed that deposited films were composed of primary nanoparticles with crystallite size in the range...