Sharif Digital Repository

Owing to wind power inherent characteristics and technical constraints of power systems operation, a considerable amount of wind energy cannot be delivered to load centers and gets curtailed. Transmission congestion together with temporal mismatch between load and available wind power can be accounted as the main reasons for this unpleasant event. This paper aims to concentrate on the wind energy curtailment for which it provides a combinatorial planning model to maximize wind power utilization. Jointly operating the wind power generation system with pumped hydro energy storage (PHES), the planning procedure tries to reach schemes with the minimum level of wind energy curtailment as well as... 

Electric energy storage (EES) installations in power systems are migrating from large centralized systems to more distributed installations for microgrid applications. This trend signifies modular EES installations for the local control of buildings and processes. A centralized EES system is often dispatched by grid operators for increasing the overall efficiency and enhancing the security of power systems. The distributed EES (DEES) is locally managed by aggregators to maximize the local impact of EES, before the aggregators' adjusted load profiles are submitted to grid operators for the day-ahead scheduling. In this paper, we present and analyze two models for the hourly scheduling of... 

Smartening of contemporaneous power delivery systems in conjunction with the increased penetration of renewable energies (REs), change the way to energize consumers who are willing to maximize their utility from energy consumption. However, there is a high degree of uncertainty in the electricity markets of such systems. Moreover, the unprecedented ascending penetration of distributed energy resources (DERs) mainly harvesting REs is a direct consequence of environmentally friendly concerns. This type of energy resources brings about more uncertainties into power system operation resulting in, necessitates probabilistic analysis of the system performance. In the smarter power markets,... 

Variability and uncertainty of wind and photovoltaic (PV) generations greatly influence technical and financial aspects of power systems. This paper examines the potential impacts of large-scale wind and PV farms on reliability level of composite generation and transmission systems. At first, reliability models of renewable-based units are developed. In these models, both component failure rates and uncertainty nature of renewable resources are taken into account. Using the proposed technique, the multi-state analytical models of a wind farm placed in Manjil and a PV farm placed in Jask both in Iran are extracted. Then, reliability studies of high renewable-energies penetrated power system... 

In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view. However criteria congestion cost (CC) and social welfare (SW) together are able to correctly evaluate transmission network from market view and so they are adopted for the market-based transmission expansion planning. To simply indicate the limits of CC and SW social welfare percentage (SWP) and congestion cost percentage (CCP) are defined. To consider uncertainty in bids of market producers and consumers, and also indeterminacy in the acceptable boundaries of the SWP and CCP and their priorities, fuzzy... 

With increment in the penetration of wind energy in power systems, the necessity of considering its impacts on transmission expansion planning (TEP) studies, especially for large scale wind farms, is inevitable. A new multi-objective (MO) optimization transmission expansion planning algorithm considering wind farm generation is presented in this two-paper set. Part I is mainly devoted to derivation of the theory and algorithm. The objective functions used in the TEP studies take into account investment cost, risk cost and congestion cost. The combination of Monte Carlo simulation (MCS) and Point Estimation Method (PEM) is implemented to investigate the effects of network uncertainties. Due... 

The deployment of flexible ac transmission system (FACTS) devices, despite miscellaneous benefits and applications, has been restricted mainly due to their large investment costs. Accordingly, the notion of distributed FACTS (D-FACTS) was recently proposed. Distributed static series compensators (DSSCs), as a new member of D-FACTS, are directly clamped to conductors of transmission lines. The possibility of controlling the compensation rate of DSSCs from the control center affords the active control of network power flow. This paper presents a comprehensive reliability model for the DSSC. The model is then reduced and a state-space representation is extracted for a transmission line with a... 

This study intends to develop a comprehensive procedure for evaluating locational value of a wind farm project incorporating reduction in transmission system losses, load delivery point interruption cost and operating cost of generating units. The energy extracted from the wind farm in normal operation condition is considered to replace the energy from fossil-fueled conventional units. In addition, composite system reliability analysis in the presence of wind power is carried out to evaluate total costs associated with curtailed energy at different load points as well as generation of generating units in contingency conditions. System reliability analysis related to large-scale wind farms,... 

In this paper, first, two new criteria, which are titled social welfare percent (SWP) and congestion cost percent (CCP), are defined for static transmission expansion planning in restructured power systems. Then by a simple example it will be shown that none of the already presented market-based criteria could completely and truly evaluate the transmission network expansion from market view. Hence the SWP and CCP criteria altogether are proposed to completely and truly evaluate the transmission network expansion. Then a least-investment cost expansion plan is searched that its SWP and CCP are in predefined acceptable limits. The results of applying of the proposed method are illustrated over... 

This paper discusses various aspects of unified power flow controller (UPFC) control modes and settings and evaluates their impacts on the power system reliability. UPFC is the most versatile flexible ac transmission system device ever applied to improve the power system operation and delivery. It can control various power system parameters, such as bus voltages and line flows. The impact of UPFC control modes and settings on the power system reliability has not been addressed sufficiently yet. A power injection model is used to represent UPFC and a comprehensive method is proposed to select the optimal UPFC control mode and settings. The proposed method applies the results of a contingency... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

In this paper, a model for the optimal placement of contingency-constrained phasor measurement units (PMUs) in electric power networks is presented. The conventional complete observability of power networks is first formulated and then, different contingency conditions in power networks including measurement losses and line outages are added to the main model. The communication constraints which would limit the maximum number of measurements associated with each installed PMU is considered as measurement limitations. The relevant formulations are also proposed to make the model more comprehensive. The IEEE standard test systems are examined for the applicability of proposed model. The... 

In this paper we investigated the structural properties of the ultra high voltage power transmission network of Iran. We modeled the power grid as a network with 105 nodes and 142 connection links. We found that the Iranian power grid displays a relatively moderate clustering coefficient-much larger than that of corresponding random networks-and small characteristics path length comparable to that of corresponding random networks; i.e. the power grid is a small-world network with exponential degree distribution. Global efficiency was considered as an indicator of grid's performance and the influence of random and intentional nodal failures on the efficiency was investigated. We also studied... 

Due to the liberalization of the electricity market and the introduction of distributed generation (DG), the importance of distribution loss allocation (LA) has increased. This paper presents a new method for distribution power LA in radial systems. The proposed method, which is based on the results of power flow and considers active and reactive power flows of lines for LA, is composed of three steps. In the first step, starting from the source nodes (i.e., the nodes whose generation is more than their load), the power loss allocated to all nodes is calculated and then the power loss allocated to the loads connected to each node is obtained. In the next step, the total power loss is... 

A pragmatic distributed algorithm (PDA) is proposed for supporting the ef-cient spectral access of multiple Primary Users (PUs) and Cognitive Users (CUs) in cooperative Cognitive Radio (CR) networks. The CUs may serve as relay nodes for relaying the signal received from the PUs to their destinations, while both the PUs' and the CUs' minimum rate requirements are satis-ed. The key idea of our PDA is that the PUs negotiate with the CUs concerning the speci-c amount of relaying and transmission time, whilst reducing the required transmission power or increasing the transmission rate of the PU. Our results show that the cooperative spectral access based on our PDA reaches an equilibrium, when it... 

Smartening of contemporaneous power delivery systems in conjunction with increased penetration of vehicle to grid (V2G) technology, changes the way market participants play their role in the market operation to maximize their profit. In V2G technology, plug-in electric vehicles (PEV) have bidirectional power flows i.e. they can either inject power to the grid or draw power from it. In recent years, the V2G technology has found a world wild attention due to its important advantages such as the peak load reduction and providing system reserve, to name a few. The unit commitment (UC) is a power system operation problem which is used to find the optimal operation schedule of generation units.... 

Due to flexibility, relatively small weight and low energy-dissipative characteristics of cables, they are vulnerable to external excitations such as wind, wind-rain, earthquake and traffic loadings. Among them, galloping phenomenon is one of the most important sources of electrical/mechanical failures in power transmission lines. In this paper, tuneable vibration absorbers (TVAs) are used to suppress galloping forced vibrations (as a semi-active control approach). Using mode summation technique, mathematical model of the hybrid problem including the transmission line and an arbitrary number of absorbers is presented. Developing a sophisticated multi-loops optimization algorithm, best values... 

In this paper, we propose a circuit model for two-dimensional arrays of metallic square holes located on a homogeneous substrate, in order to propose a new scheme containing this type of metamaterials to obtain transparent electrodes with simultaneous terahertz transparency and low electrical resistance. The results of the introduced circuit model, which is a fully analytical model with explicit expressions, are in almost complete agreement with the full-wave simulations. Thanks to this analytical model, we can employ standard binomial matching transformer in order to minimize the reflected power from the structure at a desired frequency. Furthermore, taking advantage of this model, we... 

This study presents a novel method for fault location of transmission lines by multiple fault current measurements. In contrast to conventional methods, it is proposed to utilise several current measurements, which may be far from the faulted line. The circuit equations of the network are used to express each fault current as a function of fault location. Fault location is then estimated using a least-squares estimation technique. To achieve a robust estimation of fault location, statistical hypotheses-testing is employed for identifying erroneous measurements. The method is applicable to both synchronised and unsynchronised measurements. Moreover, fault location can be estimated regardless... 

In high-voltage applications, due to the use of high-ratio step-up transformers, the value of parasitic capacitance of these transformers is large compared to the low-voltage transformers. Moreover In these applications it is prefered to use single-capacitor filters instead of filters with inductors. In this paper a simple electrical model for two-winding high frequency transformer considering all of the parasitic elements is presented. This model is used in a full-bridge based dc-dc converter with capacitive output filter controlled by phase-shifted method. The operation of this converter in DCM is analysed and its analytical relations in different time intervals is derived and confirmed by...