Sharif Digital Repository

Confronted with the power system restructuring trend reforming the past-regulated power systems, the need for a narrower insight on the costly maintenance strategies seems imperative. It falls within the realm of reliability centered maintenance to enhance the cost effectiveness of power distribution maintenance policies. From a practical point of view, this paper devises a novel approach on the basis of the analytical hierarchical process (AHP) accompanied by fuzzy sets theory to determine the most critical component types of distribution power systems to be prioritized in maintenance scheduling. In the presence of many qualitative and quantitative attributes, fuzzy sets can effectively... 

This paper approaches the topic of protection system reliability from an economic point of view by 1) designing an optimal modern protective relay based on a prescribed level of reliability subject to economic constraints and 2) determining optimal routine test intervals by balancing the cost of routine tests and losses due to relay failure. This paper proposes a method that enables the designer to optimally select hardware and software components of a digital protective relay to gain the highest possible overall reliability with a restricted budget. This design can be viewed as a reliability and redundancy allocation problem for which a new easy-to-implement algorithm is proposed. In... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and... 

A high-order compact finite-difference lattice Boltzmann method (CFDLBM) is proposed and applied to accurately compute steady and unsteady incompressible flows. Herein, the spatial derivatives in the lattice Boltzmann equation are discretized by using the fourth-order compact FD scheme, and the temporal term is discretized with the fourth-order Runge-Kutta scheme to provide an accurate and efficient incompressible flow solver. A high-order spectral-type low-pass compact filter is used to stabilize the numerical solution. An iterative initialization procedure is presented and applied to generate consistent initial conditions for the simulation of unsteady flows. A sensitivity study is also... 

We outline a comprehensive numerical procedure for modeling of species transport and surface reaction kinetics in electrokinetically actuated microfluidic devices of rectangular cross section. Our results confirm the findings of previous simplified approaches that a concentration wave is created for sufficiently long microreactors. An analytical solution, developed for the wave propagation speed, shows that, when normalizing with the fluid mean velocity, it becomes a function of three parameters comprising the channel aspect ratio, the relative adsorption capacity, and the kinetic equilibrium constant. Our studies also reveal that the reactor geometry idealized as a slit, instead of a... 

Long-time interaction of dewetting nanodroplets is investigated using a long-wave approximation method. Although three-dimensional (3D) droplets evolution dynamics exhibits qualitative behavior analogous to two-dimensional (2D) dynamics, there is an extensive quantitative difference between them. 3D dynamics is substantially faster than 2D dynamics. This can be related to the larger curvature and, as a consequence, the larger Laplace pressure difference between the droplets in 3D systems. The influence of various chemical heterogeneities on the behavior of droplets has also been studied. In the case of gradient surfaces, it is shown how the gradient direction could change the dynamics. For a... 

During any microbial enhanced oil recovery process, both cells and the metabolic products of bacteria govern the tertiary oil recovery efficiency. However, very accurate examination is needed to find the functionality of these tiny creatures at different reservoir conditions. In this regard, the effect of cell structure on ultimate microbial recovery efficiency which is the most dominant mechanism based on the microorganism types (gram-negative or gram-positive) was systematically investigated. At the first stage, possible different active mechanisms using Bacillus stearothermophilus SUCPM#14 strain were tested using specially designed injection protocol, in situ and ex situ core flooding... 

A mild and efficient tandem process for the synthesis of new highly substituted 2-pyrones starting from commercially available 2-arylacetic acids has been developed. The synthesis is based on the Knoevenagel condensation of 1,3-cyclohexadiones with various β-formyl-esters, followed by lactonization in the presence of nano ZnO (20 mol %). Moderate to high yields and readily available cheap starting materials are the key features of the present method  

In the upstream asphaltene flow assurance community, both academics and industries are actively involved to predict the asphaltene deposit profile in wellbores and pipelines. Essential information for such a study is the amount of asphaltenes that can precipitate and, hence, deposit. In this work, the perturbed chain form of the statistical associating fluid theory (PC-SAFT) is applied to predict the asphaltene precipitation onset condition as well as the amount of precipitate under pressure depletion and high-pressure and high-temperature gas injection conditions. Previous PC-SAFT asphaltene studies in crude oil required the compositional data for both flashed gas and flashed liquid. This... 

In this study, the authors present a new criterion which can be used to decompose the coding advantage (CA) of space-frequency block codes (SFBCs). The proposed decomposition separates the CA into two parts, called precoder-CA and channel-CA. The precoder-CA represents the effects of the precoder and the signal constellation, and can be used in the design of the precoder of SFBCs. The channel-CA, on the other hand, gives an indication of the effects of the channel characteristics, and can be utilised for optimising the permutation parameter. The authors have shown that the proposed decomposition method leads to a lower computational complexity for the optimisation procedure compared with the... 

The details of the crystal structure of the recently discovered Y 3Ba5Cu8O18+δ (Y358) superconductor have been determined by ab initio density functional theory. Total energy calculation has been performed for three different suggested structures with different oxygen content. The structure with a center of inversion symmetry and the highest oxygen concentration has the lowest total energy. Thus, it is the best choice for the Y358 crystal structure. By investigating the detailed structure, it is seen that this compound is arranged either of YBa2Cu3O7 and YBaCu2O 5 or YBaCu2O5 and BaCuO2 substructural blocks in the c direction. The difference between the total energy of Y358 compound and the... 

A totally computerized image processing program package is developed to analyze the SEM images of membrane surface and cross-section. Pore size distribution and porosity of the fabricated membranes are determined using the proposed image processing procedure. Furthermore, effect of coagulation bath temperature on the morphology and mechanical properties (such as tensile strength, strain break, tensile energy absorbent, and tensile stiffness) of Polysulfone (PSf) membranes are investigated. The results reveal that the mechanical properties are higher when N-methyl-2-pyrrolidone (NMP) is used as solvent. Also, an increase in the coagulation bath temperature caused a monotonous increase in the... 

In this study friction stir welding of Al-Cu laminated composites were carried out by two different tool geometries. Welding procedure was carried out from both sides of Al and Cu. Analyzing cross section of welds showed that different contact conditions between shoulder and material, offers different material flow behavior which is dependent on the tool geometry. SEM analyses showed that mixing of materials in nugget region is more pronounced in the advancing side. Also XRD results indicated that welding from Cu side, leads to intermetallic formation in mixed regions  

Liver-shape analysis and quantification is still an open research subject. Quantitative assessment of the liver is of clinical importance in various procedures such as diagnosis, treatment planning, and monitoring. Liver-shape classification is of clinical importance for corresponding intra-subject and inter-subject studies. In this research, we propose a novel technique for the liver-shape classification based on Spherical Harmonics (SH) coefficients. The proposed liver-shape classification algorithm consists of the following steps: (a) Preprocessing, including mesh generation and simplification, point-set matching, and surface to template alignment; (b) Liver-shape parameterization,... 

This study considers blood flow in total cavopulmonary connection (TCPC) morphology created in Fontan surgical procedure in patients with a single ventricle heart disease. Ordinary process of TCPC operation reduces pulmonary blood flow pulsatility since the right ventricle being bypassed. This reduction may limit the long term outcome of Fontan circulation. There is an idea of increasing pulmonary flow pulsations by keeping Main Pulmonary Artery (MPA) partially open while it was closed in ordinary TCPC operation. The purpose of the present study is to verify the effects of Antegrade Flow (AF) coming through stenosed MPA on pulmonary flow pulsations. The 3D geometry is reconstructed from CT... 

In this paper, extended composite right/left-handed (E-CRLH) transmission line (TL) metamaterial structures, with two left-handed (backward) and two right-handed (forward) pass bands, are investigated. Also, design procedures in order to design dual- and quad-band E-CRLH-TLs are presented in detail and the parameters of these structures are extracted by clean formulas, while satisfying arbitrary phase shifts at the operating frequencies. Finally, the dispersion and characteristic impedances of these transmission lines are derived and plotted. The results of this paper can be applied to any type of TL-based dual- and quad-band microwave component  

Most of the studies related to the modeling of masonry structures have by far investigated either the in-plane (IP) or the out-of-plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load-bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement-controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the... 

Purpose: The accuracy of pedicle screw placement during image-guided spine surgery (IGSS) can be characterized by estimating the target registration error (TRE). The major factors that influence TRE were identified, minimized, and verified with in vitro experiments. Materials and methods: Computed-tomography- compatible markers are placed over anatomical landmarks of lumbar vertebral segments in locations that are feasible and routinely used in surgical procedures. TRE was determined directly for markers placed on the pedicles of vertebra segments. First, optimum selections of landmarks are proposed for different landmarks according to the minimum achievable TRE values in different... 

The present study was designed to search for metabolic biomarkers and their correlation with serum zinc in Crohn's disease patients. Crohn's disease (CD) is a form of inflammatory bowel disease that may affect any part of the gastrointestinal tract and can be difficult to diagnose using the clinical tests. Thus, introduction of a novel diagnostic method would be a major step towards CD treatment.Proton nuclear magnetic resonance spectroscopy ( 1H NMR) was employed for metabolic profiling to find out which metabolites in the serum have meaningful significance in the diagnosis of CD. CD and healthy subjects were correctly classified using random forest methodology. The classification model for... 

Diffusion weighted imaging (DWI) is a non-invasive method for investigating the brain white matter structure. It can be used to evaluate fiber bundles in the brain. However, clinical acquisitions are often low resolution. This paper proposes a method for improving the resolution using sparse representation. In this method a non-diffusion weighted image (bO) is utilized to learn the patches and then diffusion weighted images are reconstructed based on the trained dictionary. Our method is compared with bilinear, nearest neighbor and bicubic interpolation methods. The proposed method shows improvement in terms of Peak Signal-to-Noise Ratio (PSNR) and Structural SIMilarity (SSIM)