Sharif Digital Repository

Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.% of palladium on activated carbon)... 

Superparamagnetic ZnFe2O4/reduced graphene oxide (rGO) composites containing ZnFe2O4 nanoparticles (with ∼5-20 nm sizes) attached onto rGO sheets (with ∼1 μm lateral dimensions) were synthesized by hydrothermal reaction method. By increasing the graphene content of the composite from 0 to 40 wt%, the size as well as the number of the ZnFe2O4 nanoparticles decreased and the saturated magnetization of the composites reduced from 10.2 to 1.8 emu/g, resulting in lower responses to external magnetic fields. Concerning this, the time needed for 90% separation of ZnFe2O4/rGO (40 wt%) composite from its solution (2 mg/mL in ethanol) was found 60 min in the presence of an external magnetic field (∼1... 

the development and enlargement of city structure has caused the environmental problems on watershed of Latian dam which is one of the drinking water resourses of Tehran. The enlargement of Lavasan town and existence of an army garrison that it's effluents of treatment plant discharge to this river necessitate a water quality surveillance in entrance area of the dam. The present research includes the survey of this river's self-purification in the mentioned-above area. Numerical analysis is used in different methods to explain self- purification. Frist, we have the numerical analysis and analytical methods for a known sample in order to determine the accuracy and deviation between two... 

Paenibacillus polymyxa ATCC 21830 was used for the production of curdlan gum for first time. A Box-Behnken experimental design was applied to optimize six variables of batch fermentation culture each at three levels. Statistical analyses were employed to investigate the direct and interactive effects of variables on curdlan production. Optimum cultural conditions were temperature (50. °C), pH (7), fermentation time (96. h), glucose (100. g/L), yeast extract (3. g/L) and agitation speed (150. rpm). The yield of curdlan production was 6.89. g/L at optimum condition medium. Response surface methodology (RSM) and artificial neural network (ANN) were used to model cultural conditions of curdlan... 

4-hydroxycoumarin 2a and 4-hydroxy-6-methyl-pyran-2-one 2b were applied in a one-pot reaction with Baylis-Hillman adduct acetates 1 to form novel 3-benzylpyrano [3, 2-c] pyran-2, 5-diones 3 in high yields (70-85%). The synthesized framework is available in many biologically active moieties. The reaction was carried out under different conditions to achieve optimum conditions. The results indicated that Et3N, as a base under solvent-free conditions, was optimum. The reaction procedure and purification method are mild and straightforward  

An important manufacturing technology spectrum is to consider rapid and sensitive assemblies through convergent product (CP) in digital environment. We integrate functions and sub-functions using a comprehensive mathematical optimization process. To form the CP, a web-based fuzzy network is considered in which a collection of base functions and sub-functions configure the nodes and each arc in the network is to be a link between two nodes. The aim is to find an optimal tree of functionalities in the network adding value to the product in the web environment. First, a purification process is performed in the product network to assign the links among bases and sub-functions. Then, fuzzy... 

Functionalized magnetic core-zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

An aqueous two-phase system (ATPS) containing polyethylene glycol (PEG) and potassium phosphate (K2HPO4) was used for partitioning and partial purification of alkaline protease produced by Bacillus licheniformis ATCC 21424. The effect of PEG molar mass, pH and concentration of NaCl salt addition on partition coefficient, yield and purification factor (PF) for ATPS were studied. The highest partition coefficient (5.3) was achieved in an ATPS of 25% (w/w) PEG 10,000 (g/mol) and 10% (w/w) NaCl at pH 9. Cation and anion exchange chromatography was employed for purification of alkaline protease from protein mixture and the yield and PF for enzyme fractions were obtained to make a comparison... 

Environmental restrictions, new transportation fuel specifications, and increased processing of heavier more-sour curds are leading substantial increases in refinery hydrogen consumption for hydrodesulfurisation, aromatic and olefin saturation and improvement of product quality and reduces in refinery hydrogen production from catalytic reformers as a by-product. Therefore above factors make hydrogen management, a critical issue. Generating, recovering and purchasing of hydrogen have significant impact on refinery operating costs. More importantly, overall refinery operations, may be constrained by the availability of hydrogen. Primary consideration, however, should be given to the recovery... 

Re/Mo separation is studied by a new solvent extraction technique which is based on extraction mechanisms of the constituent metals. Based on McCabe-Thiele plots, a flow diagram has been proposed for separation and purification of Re over Mo. Re-recovery section of the diagram shows that Re is extracted when major amount of Mo is removed. For removal of the remained Mo, a two-stage extraction is required at pH = 2 and V a/V o = 1. In order to obtain Re, the resulted aqueous phase is stripped by adding sulfuric acid. According to the results, while more Re is extracted at less pH, optimum extraction of Mo happens at pH = 1.2. Re selectivity over Mo maximizes by approaching of the pH to zero  

Most of 200 Activated Sludge Plant in Iran are overloaded and as a result, their efficiency is low. In this work, a pilot plant is manufactured and put into operation in one of the wastewater treatment plants in the west of Tehran. Instead of conventional activated sludge, a membrane bioreactor and an upflow anaerobic sludge blanket reactor used as a pretreatment unit in this pilot. For the sake of data accuracy and precision, an enriched municipal wastewater was opted as an influent to the pilot. Based on the attained result, the optimum retention time in this system was 4. h, and the overall COD removal efficiency was 98%. As a whole, the application of this retrofit would increase the... 

The mathematical techniques of decision making are among the most valuable outcomes of this research activity, which is generally referred to as realization in the operations, operational research or quantitative methods of decision making. Over time, with the increase in the complexity and the variety of decision making problems, the methods of decision making become more varied and will have more capability of problem solving. Multi-Criteria Decision Making (MCDM) is a collection of methodologies to compare, select, or rank multiple alternatives that involve incommensurate attributes. Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method is a multiple criteria... 

Thin films of titanium dioxide with high surface area are prepared by sol-gel dip-coating technique. In this regards, Titania nano sols with high photocatalytic activity were prepared by dissolving titanium alkoxide in alcohol and water under acidic conditions. Photocatalytic activities of titanium dioxide thin films were measured in the presence of methylene blue. Microstructure and photocatalytic activity of the films, nanopowders and titanium dioxide sols were investigated using X-ray diffraction, scanning electron microscopy, specific surface area, zeta sizer and ultraviolet-visible spectrometry techniques. Particle size analysis of sols showed that the mean particle sizes were 15 to 128... 

Vertically aligned multi-wall carbon nanotube (CNT) arrays were fabricated in tip-growth mode on Ni/Si substrates using plasma enhanced chemical vapor deposition. In a purification process including hydrogenation and acid washing of the Ni/CNTs, the oxygen-containing functional groups were substantially reduced and a wide hollow core at the tip of the CNTs was formed by removing the Ni seeds. Sol-gel silver nanoparticles were deposited on the surface of the unpurified Ni/CNTs, while they could also be embedded within the hollow core of the Ni-removed CNTs. The persistency of the silver ions in the Ni-removed Ag-CNTs in comparison to the release of the silver ions from the Ag-Ni/CNTs in a... 

A moving bed biofilm reactor with pre-denitrification configuration was fed with a synthetic wastewater containing high chemical oxygen demand (COD) and ammonia. By changing different variables including ammonium and COD loading, nitrification rate in the aerobic reactor and denitrification rate in the anoxic reactor were monitored. Changing the influent loading was achieved via adjusting the inlet COD (956-2,096 mg/L), inlet ammonium (183-438 mg/L), and hydraulic retention time of the aerobic reactor (8, 12, and 18 hours). The overall organic loading rate was in the range of 3.60-17.37 gCOD/m2·day, of which 18.5-91% was removed in the anoxic reactor depending on the operational conditions.... 

In the present study, CS-CA nanoparticle was prepared for forming a new amide linkage, by grafting the amino groups of CS in the presence of carboxylic groups of CA that acts as cross-linking agent. The as-prepared CS-CA nanoparticle samples were characterized by use of dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier-transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques, which showed that the cross-linking agent preserved during the chemical modifications. The adsorption capacity of the CS-CA nanoparticles for the removal of Cr (VI) in aqueous solution was studied. The adsorption equilibrium data... 

Palladium nanocatalysts supported on reduced graphene oxide (rGO), multi walled carbon nanotubes (MWCNT), and rGO/CNT composite were synthesized by a wet impregnation method using PdCl2 as a precursor. Palladium loading was 0.3 wt %, and the catalysts were reduced at 300°C. The catalysts were characterized by inductively coupled plasma, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, temperatue-programmed reduction, temperatue-programmed desorption, and Raman spectroscopy. The performance of the catalysts was investigated for hydro-purification of crude terephthalic acid (CTA) containing... 

We report the nanoporous Ag2O based on the copper terephthalate metal–organic frameworks (Ag2O/MOF) photocatalyst. Ag2O/MOF nanostructure was formed via oxygen treatment of Ag/MOF nanoparticles. The resulting Ag2O/MOF photocatalysts were characterised by various techniques. Results showed that the synthesised Ag2O/MOF nanocomposite exhibited dramatic separation of photoinduced electron/hole and excellent photodegradation activity under visible light irradiation. The degradation rate of acid blue 92 using Ag2O/MOF nanocomposite is found to be higher than that using pure MOF and Ag/MOF. It was divulged that the photodegradation rate is increased by oxygen treatment of Ag in Ag/MOF structure.... 

Introduction: It is 23 years since carbon allotrope known as carbon nanotubes (CNT) was discovered by Iijima, who described them as "rolled graphite sheets inserted into each other". Since then, CNTs have been studied in nanoelectronic devices. However, CNTs also possess the versatility to act as drug- and gene-delivery vehicles.Areas covered: This review covers the synthesis, purification and functionalization of CNTs. Arc discharge, laser ablation and chemical vapor deposition are the principle synthesis methods. Non-covalent functionalization relies on attachment of biomolecules by coating the CNT with surfactants, synthetic polymers and biopolymers. Covalent functionalization often...