Sharif Digital Repository

Recent investigations have revealed the significant role of reactive power in blackout events. The associated disturbances frequently emerge in the form of voltage instability and collapse. Due to the computational complexity of modeling and analysis of enormous contingencies, DC approximation of the power flow, without accounting the role of reactive power, is usually used to evaluate the contingencies and to mitigate the associated probable violations. This paper, at first, presents a linear power flow model based on an approximated version of AC power flow formulation. The proposed model is then used to develop an efficient reliability assessment approach which is capable of taking both... 

In this paper, a Markov model for reliability analysis of transmission lines equipped with a dynamic thermal rating (DTR) system is proposed. Moreover, a fuzzy procedure is proposed to determine an annual equivalent fuzzy DTR number to represent hourly variations of the line DTR. To implement the fuzzy annual DTR in composite system reliability analysis, an interactive method resolution technique for solving fuzzy optimization problems is developed. This method is chosen to address the fuzzy constraints associated with the lines equipped with the DTR system. Numerical results are presented using the 24-bus IEEE RTS, and demonstrate the validity of the proposed approaches  

Access to a computational tractable method for representing the system more realistically has always been an important issue in power system reliability assessment. The Post Optimal Analysis (POA), as a well recognized technique to attack a set of similar optimization problems, has been successfully used to assess the reliability of composite systems. This method exploits the similarity of the system states to speed up the contingency evaluation procedure without sacrificing the accuracy of the results. In this paper, the performance and practical feasibility of the POA technique for power system reliability evaluation is tested using the Iran power grid. The POA based approach is applicable... 

Monitoring/control infrastructures are often assumed to be fully reliable in power system reliability studies. However, recent investigations on blackouts have revealed the crucial impacts of monitoring/control system malfunctions. This paper addresses the impact of situational awareness and controllability on power system reliability assessment. A methodology is proposed to simulate a situation in which a limitation of either or both monitoring and control functions could spread the consequence of power system events throughout the grid. It is assumed that the monitoring/control infrastructure is based on a wide-area measurement system (WAMS). While the proposed methodology is applicable to... 

Design and development of fault diagnosis schemes (FDS) for electric power distribution systems are major steps in realizing the self-healing function of a smart distribution grid. The application of the FDS in the electric power distribution systems is mainly aimed at precise detecting and locating of the deteriorated components, thereby enhancing the quality and reliability of the electric power delivered to the customers. The impacts of two types of the FDS on distribution system reliability are compared and presented in this paper. The first type is a representative of the FDS which diagnoses the deteriorated components after their failing. However, the second type is a representative of... 

This study proposes an approach for improving service reliability in the distribution network based on establishing competition among electric distribution utilities. The idea behind this approach is to categorise the utilities and compare the performance of utilities located in one cluster with the other members of the same cluster. The reward/penalty mechanism (RPM) as a quality regulating instrument is designed for each cluster and used to penalise the utilities with a performance worse than the benchmark and to reward them for providing a performance better than the benchmark. Based on the RPM, utilities located in one cluster compete to make more profit by serving customers in better... 

The deployment of flexible ac transmission system (FACTS) devices, despite miscellaneous benefits and applications, has been restricted mainly due to their large investment costs. Accordingly, the notion of distributed FACTS (D-FACTS) was recently proposed. Distributed static series compensators (DSSCs), as a new member of D-FACTS, are directly clamped to conductors of transmission lines. The possibility of controlling the compensation rate of DSSCs from the control center affords the active control of network power flow. This paper presents a comprehensive reliability model for the DSSC. The model is then reduced and a state-space representation is extracted for a transmission line with a... 

This study intends to develop a comprehensive procedure for evaluating locational value of a wind farm project incorporating reduction in transmission system losses, load delivery point interruption cost and operating cost of generating units. The energy extracted from the wind farm in normal operation condition is considered to replace the energy from fossil-fueled conventional units. In addition, composite system reliability analysis in the presence of wind power is carried out to evaluate total costs associated with curtailed energy at different load points as well as generation of generating units in contingency conditions. System reliability analysis related to large-scale wind farms,... 

Protective relay technologies have evolved from single-function electromechanical and static relays to modern multifunction digital relays over the past few years. Protection systems play a vital role in maintaining a desirable level of reliability in power systems. Thus, their own reliability should be evaluated and any cause of their malfunction should be fully comprehended. In this paper, a new reliability model is proposed that associates protection system failures to four main causes: 1) relay hardware, 2) relay software, 3) ancillary equipment, and 4) human error. In addition, this model can take other aspects of the protection system into consideration, such as human error during... 

Probabilistic analyses of a wide-area measurement system (WAMS) would require equivalent reliability models for its components which include phasor measurement units (PMUs). In this paper, the reliability modeling of PMU is proposed and the proposed model is extended to consider options for the PMU hardware. The Markov process is employed to analyze the proposed model and to present an equivalent two-state model of PMUs. Reliability parameters of PMU are estimated with major difficulties associated with limited and uncertain data. In this paper, uncertainties are taken into account to achieve more realistic estimates of PMU characteristics. Fuzzy sets along with reliability analyses and... 

An algorithm for determining optimal reserve capacity in a power market is presented in this paper. Optimization process in the proposed algorithm is based on the cost-benefit trade off. Market clearance is executed with consideration of uncertainties of power system components in an aggregated environment. It is assumed that both generating units and interruptible loads participate in the reserve market. In addition, customers' reliability requirements are considered as constraints for decision making process of ISO. The rendered method considers random outages of generating units and transmission lines and determined outage of interruptible loads and employs Monte Carlo Simulation (MCS)... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

Fast charging stations are vital components for public acceptance of electric vehicle (EV). The stations are connected to the electric grid and can recharge an electric vehicle in less than 20. min. Charging station development is highly influenced by the government policy in allocating station development costs. This paper presents a Mixed-Integer Non-Linear (MINLP) optimization approach for optimal placing and sizing of the fast charging stations. The station development cost, EV energy loss, electric gird loss as well as the location of electric substations and urban roads are among the factors included in the proposed approach. Geographic information has been used to determine EV energy... 

Recently, various approaches have been introduced to estimate the response of offshore structures in different sea states by stepwisely intensifying records. In this article, a more practical approach entitled Modified Endurance Wave Analysis (MEWA) considering the random and probabilistic nature of wave loading and utilizing optimal time duration is introduced. Generation procedure of this approach is described based on two practical wave theories: random and constrained new-wave. In addition, assessment of a simplified model representing a typical fixed offshore platform under extreme wave conditions in the Persian Gulf is performed making use of MEWA. A comparative analysis has been also... 

A fast statistical method for the analysis of the Read SNM of a 6 T SRAM cell in near/subthreshold region is proposed. The method is based on the nonlinear behavior of the cell. DIBL and body effects are thoroughly considered in the derivation of an accurate closed form solution for the Read Static Noise Margin (SNM) of the near/subthreshold SRAM cell. This method uses the state space equation to derive the Read SNM of the cell as a function of threshold voltage of cell transistors. This function shows the dependency of the Read SNM on sizing, VDD, temperature, and threshold voltage variations. It provides a fast reliability analysis for a cell array of a given size and a supply voltage. It... 

Public participation is counted as one of the main indexes in sustainable urban management. Based on their nature, metropolitan cities has several and complex problems. For this purpose Tehran metropolitan area is selected. Quantitative Strategic Planning Matrix (QSPM) weighted through a made-byresearcher questionnaire. The reliability of the model was verified by Cronbach’s alpha coefficient. Evaluation matrix for internal and external factors was equal to 1.944 and 3.413, respectively. The strategies were classified and prioritize by quantitative matrix. Suitable strategies for Tehran city are as follows: developing a strategic plan in field of social control participatory management for... 

In this study, a novel network reinforcement model incorporating optimal wind farms (WFs) integration to power systems is proposed. Based on the reinforcement model, new transmission lines are added to the network for eliminating the transmission network congestion. In addition, a methodology for determining the WFs optimal capacities, the economical WF lines transfer rates and the appropriate reinforcement plan, whereas maximising the total benefit using cost-reliability analysis is presented. In this way, the objective of the proposed optimisation problem has been divided into a master problem and two subproblems. Benders decomposition is employed to connect the master and subproblems of... 

In the natural gas transmission network, from supply points to demand nods there are various technological options that include processing, transportation, conversion and gas distribution. Comprehensive analysis of natural gas network requires evaluation of different chains of gas flow through various levels based on economical and environmental criteria subject to technical and operational constraints such as feasibility, operability and reliability of different alternatives. To aid decision-making process in the sector of natural gas, a generic optimization-based model has been developed for assessing long term energy issues related to planning and design of natural gas supply systems. The... 

Reliability methods are employed in this paper to analyze the seismic risk to the Vancouver metropolitan region in Canada. The use of reliability methods contrasts with several contemporary approaches for risk analysis. In this paper, two analysis approaches are presented and implemented in a new computer program. One utilizes the first-order and second-order reliability methods together with a hazard combination technique. The other is a sampling-based method that repeatedly generates damage scenarios in the time period of interest. Both strategies employ the same collection of probabilistic models for seismic risk analysis. While the models are presented in the companion paper, this paper... 

A library of probabilistic models for prediction of seismic risk is presented. The models are specifically intended for use with reliability methods to compute event probabilities, such as seismic loss probabilities. Several models are presented here for the first time. In particular, new and generic models are proposed for earthquake location, regional loss, building response, building damage, and building loss. Each model is presented with an explanation of its development and a discussion of its predictions. In addition, models from the literature are " smoothed" to make them amenable to reliability analysis. The models are implemented in a new computer program that is tailored for...