Sharif Digital Repository

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

In power distribution systems, sometimes, system reliability indices are available, where some components' reliability parameters are unknown. This letter presents the inverse reliability evaluation (IRE) problem in radial distribution systems to find unknown components' parameters from the known system reliability indices. To this end, a nonlinear system of equations is presented and solved. The solutions are analyzed in the RBTS bus 2 to verify the applicability of the proposed approach and to show the importance of the IRE problem. © 1969-2012 IEEE  

In this paper, an analytical approach for the reliability modeling of large wind farms is presented. A systematic method based on frequency and duration approach is utilized to model a wind farm like a multistate conventional unit, where the probability, frequency of occurrence, and departure rate of each state can be obtained using the regional wind regime of wind farm and wind turbine characteristics. The proposed method is capable of finding both annual frequency and average time of load curtailment analytically in the presence of wind power. A wind farm in the northern region of Iran with the wind speed registration of one year is studied in this paper. To accommodate time-varying... 

Access to a computational tractable method for representing the system more realistically has always been an important issue in power system reliability assessment. The Post Optimal Analysis (POA), as a well recognized technique to attack a set of similar optimization problems, has been successfully used to assess the reliability of composite systems. This method exploits the similarity of the system states to speed up the contingency evaluation procedure without sacrificing the accuracy of the results. In this paper, the performance and practical feasibility of the POA technique for power system reliability evaluation is tested using the Iran power grid. The POA based approach is applicable... 

Access to a computational tractable method for representing the system more realistically has always been an important issue in power system reliability assessment. The Post Optimal Analysis (POA), as a well recognized technique to attack a set of similar optimization problems, has been successfully used to assess the reliability of composite systems. This method exploits the similarity of the system states to speed up the contingency evaluation procedure without sacrificing the accuracy of the results. In this paper, the performance and practical feasibility of the POA technique for power system reliability evaluation is tested using the Iran power grid. The POA based approach is applicable... 

With the capacity increase of large-scale DC renewable energy and DC loads, the reliability issues of hybrid AC/DC networks become increasingly prominent. On the other hand, a modern distribution network should also deliver power to individual customers based on their priority levels and the traditional reliability indices are not suitable for modern networks. Flexible reliability (FR) is a new concept that considers the loads' importance in the reliability evaluation of distribution grids. In this study, a novel comprehensive FR index is introduced for hybrid AC/DC networks. To determine the proposed index, power networks are modelled as a topological combination of edges and nodes. An... 

This paper investigates a reliability-centered approach for the placement procedure of remote terminal units (RTUs) in power distribution systems. Entire attempt is contributed to incorporate the practical aspects interrelated with the problem, e.g. the accessibility to the candidate substations, the load point criticality, as well as the load probabilistic behavior and consequently the inevitable variation in the electricity price. The placement process is done through an optimization problem wherein the common reliability indices, as the decisive factors in the placement process, are going to be minimized. The approach is successfully applied to a real power distribution feeder of Iran's... 

This paper proposes a stochastic mixed-integer programming (SMIP) model for the reliability-constrained unit commitment (RCUC) problem. The major objective of the paper is to examine both features of accuracy and efficiency of the proposed SMIP model of RCUC. The spinning reserve of generating units is considered as the only available reserve provision resource; however, the proposed formulation can be readily extended to comprise the other kind of reserve facilities. Expected load not served (ELNS) and loss of load probability (LOLP) are accommodated as the reliability constraints. Binding either or both reliability indices ensures the security of operation incorporating the stochastic... 

This paper proposes a stochastic mixed-integer programming (SMIP) model for the reliability-constrained unit commitment (RCUC) problem. The major objective of the paper is to examine both features of accuracy and efficiency of the proposed SMIP model of RCUC. The spinning reserve of generating units is considered as the only available reserve provision resource; however, the proposed formulation can be readily extended to comprise the other kind of reserve facilities. Expected load not served (ELNS) and loss of load probability (LOLP) are accommodated as the reliability constraints. Binding either or both reliability indices ensures the security of operation incorporating the stochastic... 

The reliability Studies are done in order to determine the probability of functioning or availability of different engineering systems. These studies can also provide a basis for comparing different structures of a system and can be used as a tool to improve the system design. Also, reliability is an important consideration in the planning, design and operation of transit system. Since the issue of the reliability of electric vehicles has not been sufficiently and seriously evaluated yet, so in this paper, the reliability of the various types of these kinds of vehicles will be discussed and then the reliability indices of them will be compared with each other and with the conventional cars  

This study proposes an approach for improving service reliability in the distribution network based on establishing competition among electric distribution utilities. The idea behind this approach is to categorise the utilities and compare the performance of utilities located in one cluster with the other members of the same cluster. The reward/penalty mechanism (RPM) as a quality regulating instrument is designed for each cluster and used to penalise the utilities with a performance worse than the benchmark and to reward them for providing a performance better than the benchmark. Based on the RPM, utilities located in one cluster compete to make more profit by serving customers in better... 

As a part of the ongoing debate about competition in the electricity industry, regulators are increasingly considering performance-based regulation (PBR) as an alternative to improve the service quality. The fundamental principle behind PBR is that good performance should lead to higher profits, and poor performance should result in lower profits. A penalty-reward structure (PRS) in a PBR mechanism can enhance utility performance to align utility interests with customer's interests. During the implementation of PBR, regulators should spend or receive money to reward good performed utilities or penalised poor performed utilities, respectively. A technique is proposed, in this study, to not... 

This study proposes an approach for improving service reliability in the distribution network based on establishing competition among electric distribution utilities. The idea behind this approach is to categorise the utilities and compare the performance of utilities located in one cluster with the other members of the same cluster. The reward/penalty mechanism (RPM) as a quality regulating instrument is designed for each cluster and used to penalise the utilities with a performance worse than the benchmark and to reward them for providing a performance better than the benchmark. Based on the RPM, utilities located in one cluster compete to make more profit by serving customers in better... 

As a part of the ongoing debate about competition in the electricity industry, regulators are increasingly considering performance-based regulation (PBR) as an alternative to improve the service quality. The fundamental principle behind PBR is that good performance should lead to higher profits, and poor performance should result in lower profits. A penalty-reward structure (PRS) in a PBR mechanism can enhance utility performance to align utility interests with customer's interests. During the implementation of PBR, regulators should spend or receive money to reward good performed utilities or penalised poor performed utilities, respectively. A technique is proposed, in this study, to not... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

Distribution automation (DA) application for fault management in the electricity distribution networks is one of the main potential remedial actions to reduce customers' outage times and hence improve service reliability. As a result, various automation schemes have been developed and introduced in different countries and by different venders. The impacts of implementing a specific automation scheme on reliability indices of a given distribution system can be different from other available automation schemes. For this reason, when comparing the available automation schemes with each other or with the other reliability improvement measures, it is necessary to perform a course of reliability...