Sharif Digital Repository

With the capacity increase of large-scale DC renewable energy and DC loads, the reliability issues of hybrid AC/DC networks become increasingly prominent. On the other hand, a modern distribution network should also deliver power to individual customers based on their priority levels and the traditional reliability indices are not suitable for modern networks. Flexible reliability (FR) is a new concept that considers the loads' importance in the reliability evaluation of distribution grids. In this study, a novel comprehensive FR index is introduced for hybrid AC/DC networks. To determine the proposed index, power networks are modelled as a topological combination of edges and nodes. An... 

In power distribution systems, sometimes, system reliability indices are available, where some components' reliability parameters are unknown. This letter presents the inverse reliability evaluation (IRE) problem in radial distribution systems to find unknown components' parameters from the known system reliability indices. To this end, a nonlinear system of equations is presented and solved. The solutions are analyzed in the RBTS bus 2 to verify the applicability of the proposed approach and to show the importance of the IRE problem. © 1969-2012 IEEE  

Reliability cost is considered as an inevitable criterion in expansion planning studies of distribution systems. However, nonlinear expressions of reliability indices aggravate complexity of planning studies. To address this issue, this letter proposes a novel method to linearize mathematical model of the reliability-based distribution expansion planning problem. Using this variant of reliability indices, reliability costs can easily be involved in mixed-integer linear programming model of distribution expansion planning. Validity of the derived expressions is tested by simulation results. © 1969-2012 IEEE  

This paper investigates the role of parking lots in improving the reliability of renewable-based distribution systems, through provision of vehicle-to-grid (V2G) programs during outage events. In this regard, municipal parking decks are viewed as distributed energy storage systems and the amount of available energy from these units in random contingency events is probabilistically modeled for reliability studies. Appropriate stochastic models are also introduced to capture the volatility and intermittency of renewable sources. Moreover, it is discussed that how the adopted outage management scheme (OMS) in contingency events can affect the reliability level of customers. In response, several... 

Distribution companies try to meet different goals such as increasing profitability, reducing investment and improving reliability indices. Therefore, distribution network planning has converted into complex multi-objective optimization problems. Mathematicians and operation research experts have developed many methods which can be used for solving these problems. Despite all efforts to develop applicable approaches for these problems, there is still no general consensus on project selection policy. Evaluating the strengths and weaknesses of each network optimization strategy selection in pragmatic manner is the objective of current research. In this paper, many methods used in network... 

This study aims at quantitatively assessing the availability indices of various substation automation systems. In order to illustrate the proposed technique, first, nine types of substation automation architectures are reviewed. The reliability block diagrams of various substation automation architectures are then developed. Subsequently, comparative studies are performed to demonstrate the most reliable architectures in comparison with the others. The results obtained by the proposed approach show the impact of repair on availability indices of the automation system. Finally, different sensitivity analyses are conducted for all architectures, where the impact of varying availability of all... 

Access to a computational tractable method for representing the system more realistically has always been an important issue in power system reliability assessment. The Post Optimal Analysis (POA), as a well recognized technique to attack a set of similar optimization problems, has been successfully used to assess the reliability of composite systems. This method exploits the similarity of the system states to speed up the contingency evaluation procedure without sacrificing the accuracy of the results. In this paper, the performance and practical feasibility of the POA technique for power system reliability evaluation is tested using the Iran power grid. The POA based approach is applicable... 

The reliability Studies are done in order to determine the probability of functioning or availability of different engineering systems. These studies can also provide a basis for comparing different structures of a system and can be used as a tool to improve the system design. Also, reliability is an important consideration in the planning, design and operation of transit system. Since the issue of the reliability of electric vehicles has not been sufficiently and seriously evaluated yet, so in this paper, the reliability of the various types of these kinds of vehicles will be discussed and then the reliability indices of them will be compared with each other and with the conventional cars  

Of particular interest to restrict the short-circuit level of interconnected power systems is to exploit fault current limiter (FCL) technologies. FCLs let the system planners devise new reliable and rather economical substation configurations and provide the possibility of proposing a promising cost-effective and prompt solution to the fault current over duty problem in the existing substations. This paper attempts to assess reliability of substation architectures accommodating the FCL operation and, besides, numerically investigates the FCL's impacts on the substation reliability indices. In order to clarify the proposed approach, two case studies with and without FCL are analyzed and... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

Distribution automation (DA) application for fault management in the electricity distribution networks is one of the main potential remedial actions to reduce customers' outage times and hence improve service reliability. As a result, various automation schemes have been developed and introduced in different countries and by different venders. The impacts of implementing a specific automation scheme on reliability indices of a given distribution system can be different from other available automation schemes. For this reason, when comparing the available automation schemes with each other or with the other reliability improvement measures, it is necessary to perform a course of reliability... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

This paper proposes a stochastic mixed-integer programming (SMIP) model for the reliability-constrained unit commitment (RCUC) problem. The major objective of the paper is to examine both features of accuracy and efficiency of the proposed SMIP model of RCUC. The spinning reserve of generating units is considered as the only available reserve provision resource; however, the proposed formulation can be readily extended to comprise the other kind of reserve facilities. Expected load not served (ELNS) and loss of load probability (LOLP) are accommodated as the reliability constraints. Binding either or both reliability indices ensures the security of operation incorporating the stochastic... 

As a part of the ongoing debate about competition in the electricity industry, regulators are increasingly considering performance-based regulation (PBR) as an alternative to improve the service quality. The fundamental principle behind PBR is that good performance should lead to higher profits, and poor performance should result in lower profits. A penalty-reward structure (PRS) in a PBR mechanism can enhance utility performance to align utility interests with customer's interests. During the implementation of PBR, regulators should spend or receive money to reward good performed utilities or penalised poor performed utilities, respectively. A technique is proposed, in this study, to not... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

This paper presents a reliability-based approach to select appropriate wind turbine types for a wind farm considering site-specific wind speed patterns. An actual wind farm in the northern region of Iran with the wind speed registration of one year is studied in this paper. An analytic approach based on total probability theorem is utilized in this paper to model the probabilistic behavior of both turbines' availability and wind speed. Well-known probabilistic reliability indices such as loss of load expectation (LOLE), expected energy not supplied (EENS) and incremental peak load carrying capability (IPLCC) for wind power integration in the Roy Billinton Test System (RBTS) are examined. The... 

Loop restoration scheme (LRS) is a special feeder automation (FA) scheme, which is used by utilities to improve distribution system reliability. The LRS is controlled and managed by its automatic control system (ACS). The impacts on distribution system reliability indices of implementing LRS mainly depend on the type of its ACS. Two common types of ACS of LRS are presented and used in this study. Successful operation of ACS is dependent on the protection and automatic control functions of switching devices of LRS. Different failure modes of these switching devices can therefore affect the procedure of ACS in fault detecting, isolating and service restoration. The impacts of failure of... 

In this paper, an analytical approach for the reliability modeling of large wind farms is presented. A systematic method based on frequency and duration approach is utilized to model a wind farm like a multistate conventional unit, where the probability, frequency of occurrence, and departure rate of each state can be obtained using the regional wind regime of wind farm and wind turbine characteristics. The proposed method is capable of finding both annual frequency and average time of load curtailment analytically in the presence of wind power. A wind farm in the northern region of Iran with the wind speed registration of one year is studied in this paper. To accommodate time-varying... 

This paper probes the impact of utilizing an IPFC on the reliability indices of interconnected power systems. First, a concise presentation of IPFC and its structure are provided and the reliability model of two unequally-rated parallel transmission lines equipped with IPFC is then extracted. The assumed IPFC is composed from two parallel converting bridges associated with each line. Afterwards, based-on equivalent assisting unit approach, different commonly-used adequacy indices including the loss of load expectation (LOLE), loss of energy expectation (LOEE) and system minutes (SM) are calculated. A set of numerical analyses are conducted to illustrate the sensitivity of these indices with... 

Failure statistics of most utilities indicate that distribution systems make the greatest individual contribution to the unavailability of supply to customers. Optimal capacitor placement in distribution systems has a number of advantages such as reducing losses, improving voltage profile, improving power factor and so on. The conventional objective function of the optimal capacitor placement consists of the total cost of losses and investments. Since capacitors supply reactive loads locally, they improve the load-carrying capability of the lines and therefore play the same role as redundant lines. Thus, optimal capacitor placement can also improve the reliability indices of a distribution...