Sharif Digital Repository

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

The discrete fracture network (DFN) and Multiple-Continua concept are among the most widely used methods to model naturally fractured reservoirs. Each faces specific limitations. The recently introduced recovery curve method (RCM) is believed to be a compromise between these two current methods. In this method the recovery curves are used to determine the amount of mass exchanges between the matrix and fracture mediums. Two recovery curves are assigned for each simulation cell, one curve for gas displacement in the presence of the gravity drainage mechanism, and another for water displacement in the case of the occurrence of the imbibition mechanism. These curves describe matrix-fracture... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

In recent years, polysilicon nanoparticles are used to enhance the oil recovery through the water injection process in oilfields. The contributing mechanisms are the reduction of interfacial tension and wettability alteration which lead to improving or decreasing the oil phase relative permeability and can be traced by change of relative permeability curves. However, profound understanding of the effect of dispersed nano-silica particles on the hysteretic behavior of relative permeability curves remains a controversy topic in the literature.The current study illustrates the influence of dispersed silica particles on hysteretic trend of two-phase curves of oil-water relative permeability.... 

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Spontaneous imbibition of water into the matrix is the most important mechanism for oil recovery in water wet fractured porous media. If the water is in contact with matrix and it is not flowing, the process is called static imbibition. The effect of rock and fluid properties, and boundary conditions on static imbibition are studied and formulated for scaling of the laboratory data to the reservoir scale. In reality, there is a continuous flow in a fracture; incorporating the effect of fracture flow into the scaling formulations is an unresolved issue in the modeling of the capillary imbibition recovery from the matrix. In this article, a new mathematical equation is developed to scale... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

Capillary pressure is one of the most important parameters for reservoir engineering studies. Although different experimental methods are devised to measure capillary pressure, these methods do not represent the physics of fluid flow, which happens at reservoir conditions. Thus, it is attempted to extract the capillary pressure from spontaneous imbibition data, the common mechanism of oil production in water wet porous media. In this work, a new approach is developed to obtain the imbibition capillary pressure curve by using spontaneous water imbibition data in oil-water-rock systems. Comparison of calculated imbibition capillary pressure curves by the new approach with experimental values... 

Techniques of production data analysis for single-phase oil and gas reservoirs have advanced significantly over the past few years. These techniques range from traditional (i.e., Arps, 1945; Fetkovich, 1980) to modern methods that account for the variation of operating conditions at the wellbore. However, the application of these later methods to gas condensate reservoirs is a challenge. The authors aimed to extend the applicability of modern production data analysis (single-phase flow) to analyze the production data of a gas condensate reservoir (two-phase flow). A single-phase production model consists of (a) a material balance equation, (b) the solution of diffusivity equation for gas... 

Interfacial tension (IFT) as one of the main properties for efficient CO2 flooding planning in oil reservoirs depends strongly on pressure, temperature, and composition of the reservoir fluids. Therefore, it is important to measure this property at real reservoir conditions for successful field development plan. In this study, an axisymmetric drop shape analysis (ADSA) has been utilized to measure the equilibrium IFTs between crude oil and CO2 at different temperatures and pressures. Moreover, minimum miscibility pressures (MMP) and first-contact miscibility pressures (P max) of crude oil/CO2 systems at different temperatures are determined by applying the vanishing interfacial tension (VIT)... 

During miscible displacements in fractured porous media, one of the most important factors that plays a significant role in oil production is the matrix-fracture interaction. In this work, a series of hydrocarbon injection experiments have been performed on a fractured glass micromodel that was designed specifically to study matrix-fracture interaction. A high quality image analysis method was used to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that in the case of unit viscosity ratio, the injection rate increased the slope of recovery curve and consequently improved the final... 

The petroleum industry tends to paint an optimistic picture with respect to future petroleum availability. In order to anticipate demand, the size of connected volume of hydrocarbon of fields needs to be known. During the early stage of life of a reservoir, due to the lake of certain data, connected volume of hydrocarbon is usually based on analogues or rules of thumb and not detailed reservoir modeling. Therefore, there is a great incentive to produce physically-based methodologies to make an estimation of connected volume of hydrocarbon. Percolation theory is used to estimate the connected volume of hydrocarbon very fast. Furthermore, the result has been validated against areal field... 

Optimization of any production operation is a tool for increasing production rates and reducing production costs. Water flooding is one of the techniques that frequently be used to increase oil recovery after primary depletion. A methodology for optimizing the production by using the net present value of a heterogeneous reservoir under water flooding has been presented, which is based on controlling the bottomhole pressures of the production wells, using smart well technology. For this purpose, a numerical flow simulator is coupled with an optimization program. The technique was implemented on a synthetic two dimensional oil reservoir with heterogeneous permeability. This optimization... 

Producing from gas condensate reservoirs under dew-point pressure and at constant temperature shows a complex behavior because of existing liquid condensate around the well. Zones with different mobilities generate three zones as a zone away from the well containing only gas, a zone having liquid around the well and finally a zone containing movable oil and gas. Existence of condensate around wellbore reduces gas relative permeability and as a result productivity index of the well will decrease. In fact, this condensate acts like an additional skin and investigating of this behavior can be difficult because of the complex fluid flow processes. Well test analysis in naturally fractured... 

Dilute Surfactant flooding has been recognized as one of the significant processes in chemical flooding. Many oil reservoirs became appropriate candidates for surfactant/water flooding when screening criteria was developed. Injected surfactant tried to mobilize the residual oil that was trapped in interstice. The main contributing mechanism to enhance oil recovery by surfactant flooding was defined as rock wettability alteration. Wettability is one of the substantial parameters to choose the best approach for a successful surfactant flooding in which tiny change in wettability will lead to improve oil recovery fundamentally. In this experimental study the effect of different aging time and... 

Alkaline-Surfactant-Polymer flooding is one of the most novel chemical enhanced oil recovery methods in the petroleum industry. This method has attracted interest due to its remarkable advantages. In this work, a series of ASP floods are conducted on fractured/non-fractured carbonate rocks. The performance of the tests was investigated by various ASP floods consisting of five types of polymers, two surfactants and one common alkaline. ASP was flooded simultaneously and sequentially in four defined scenarios after water flooding. The results showed that although using hydrolysed polymers increases the recovery factor in the fractured medium, sulfonated polymers increase oil recovery even more... 

Determination of different facies in an underground reservoir with the aid of various applicable neural network methods can improve the reservoir modeling. Accordingly facies identification from well logs and cores data information is considered as the most prominent recent tasks of geological engineering. The aim of this study is to analyze and compare the five artificial neural networks (ANN) approaches with identification of various structures in a rock facies and evaluate their capability in contrast to the labor intensive conventional method. The selected networks considered are Backpropagation Neural Networks (BPNN), Radial Basis Function (RBF), Probabilistic Neural Networks (PNN),... 

Over the years, accurate prediction of dew-point pressure of gas condensate has been a vital importance in reservoir evaluation. Although various scientists and researchers have proposed correlations for this purpose since 1942, but most of these models fail to provide the desired accuracy in prediction of dew-point pressure. Therefore, further improvement is still needed. The objective of this study is to present an improved artificial neural network (ANN) method to predict dew-point pressures in gas condensate reservoirs. The model was developed and tested using a total set of 562 experimental data point from different gas condensate fluids covering a wide range of variables. After a...