Sharif Digital Repository

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Spontaneous imbibition of water into the matrix is the most important mechanism for oil recovery in water wet fractured porous media. If the water is in contact with matrix and it is not flowing, the process is called static imbibition. The effect of rock and fluid properties, and boundary conditions on static imbibition are studied and formulated for scaling of the laboratory data to the reservoir scale. In reality, there is a continuous flow in a fracture; incorporating the effect of fracture flow into the scaling formulations is an unresolved issue in the modeling of the capillary imbibition recovery from the matrix. In this article, a new mathematical equation is developed to scale... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

Optimization of any production operation is a tool for increasing production rates and reducing production costs. Water flooding is one of the techniques that frequently be used to increase oil recovery after primary depletion. A methodology for optimizing the production by using the net present value of a heterogeneous reservoir under water flooding has been presented, which is based on controlling the bottomhole pressures of the production wells, using smart well technology. For this purpose, a numerical flow simulator is coupled with an optimization program. The technique was implemented on a synthetic two dimensional oil reservoir with heterogeneous permeability. This optimization... 

The authors present the results of numerical tests and simulations to investigate and analyze the likelihood of asphaltene precipitation and deposition during CO2 flooding in a reservoir. The effects of asphaltene precipitation on oil properties such as oil viscosity and density during miscible CO2 flooding process were elaborated by using Winprop software of Computer Modeling Group. Also oil properties change during CO 2 miscible flooding by numerical slim tube were investigated by a compositional simulator (GEM). A fluid sample of Saskatchewan Reservoir that had been flooded miscibly with CO2 was chosen for performing the sensitivity analyses. The results showed that asphaltene... 

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

Asphaltene deposition has hindered oil production from asphaltenic oil reservoirs through deposition in reservoir rock and surface facilities. This paper investigates the effect of resin on asphaltene deposition at different pressures. To investigate the asphaltene deposition in the presence of resins at reservoir temperature and different pressures, a pressure, volume, and temperature (PVT) visual cell was designed. A high-resolution microscope and image processing software were used to detect and determine the amount of deposited asphaltene as well as its size distribution at different conditions. Two types of Iranian crude oils with different potential of deposition (low and high) were... 

The authors simulated a reservoir by using two-layer perceptron. Indeed a model was developed to simulate the increase in oil recovery caused by bacteria injection into an oil reservoir. This model was affected by reservoir temperature and amount of water injected into the reservoir for enhancing oil recovery. Comparing experimental and simulation results and also the erratic trend of data show that the neural networks have modeled this system properly. Considering the effects of nonlinear factors and their erratic and unknown impacts on recovered oil, the perceptron neural network can develop a proper model for oil recovery factor in various conditions. The neural networks have not been... 

Not only should dams be evaluated for seismic shaking, but their capability to survive potential fault displacement in their foundations should also be assessed. Safety reviews of existing dams suggest that geological-seismic evaluation of some dam sites has failed to recognize the existence of possibly active faults. In this study, the nonlinear seismic behavior of concrete gravity dams, due to relative fault dislocation occurring in foundations, has been investigated. Two types of fault movement, including normal-slip and reverse-slip, have been considered. These two types, combined with the location of fault lines, with respect to the toe, middle, and heel of the dam base, angle of fault,... 

This work concerns simultaneous determination of relative permeability, capillary pressure, pore size distribution (PSD), and residual oil saturation data by optimization of well testing data, and introduces a new capillary pressure relationship, based on the Weibull distribution function, for direct determination of the PSD function from capillary pressure parameters. Three consecutive injection, fall off, and production well tests are performed on a predefined synthetic reservoir through simulation, and an optimization algorithm is used to find the parameters of relative permeability and capillary pressure curves as well as the value of residual oil saturation. The PSD function is also... 

Demands for hydrocarbon production have been increasing in recent decades. As a tertiary production processes, chemical flooding is one of the effective technologies to increase oil recovery of hydrocarbon reservoirs. Retention of surfactants is one of the key parameters affecting the performance and economy of a chemical flooding process. The main parameters contribute to surfactant retention are mineralogy of rock, surfactant structure, pH, salinity, acidity of the oil, microemulsion viscosity, co-solvent concentration, and mobility. Despite various theoretical studies carried out so far, a comprehensive and reliable predictive model for surfactant retention is still found lacking. In this... 

Most of the reported robust and non-robust optimization works are formulated based on a single-objective optimization, commonly in terms of net present value. However, variation of economical parameters such as oil price and costs forces such high computational optimization works to regenerate their optimum water injection policies. Furthermore, dynamic optimization strategies of water-flooding often lack robustness to geological uncertainties. This paper presents a multi-objective while robust optimization methodology by incorporating three dedicated objective functions. The goal is to determine optimized and robust water injection policies for all injection wells. It focuses on reducing... 

Multiple contact miscible floods such as injection of relatively inexpensive gases into oil reservoirs are considered as well-established enhanced oil recovery (EOR) techniques for conventional reservoirs. A fundamental factor in the design of gas injection project is the minimum miscibility pressure (MMP), whereas local sweep efficiency from gas injection is very much dependent on the MMP. Slim tube displacements, and rising bubble apparatus (RBA) are two main tests that are used for experimentally determination of MMP but these tests are both costly and time consuming. Hence, searching for quick and accurate mathematical determination of gas-oil MMP is inevitable. The objective of this... 

As the oil production from conventional oil reservoirs is decreasing, oil production through Enhanced Oil Recovery (EOR) processes is supposed to compensate for both the oil production reduction in matured oil reservoirs and the worldwide dramatic increase in oil demand. Therefore, developing a strategy to choose an optimized EOR technique is crucial to find a resolution for production decline in oil reservoirs. A screening tool recommending the most appropriate EOR method is proposed in this study. An expert fuzzy logic system is employed to screen four well-known EOR methods including miscible CO2 injection, miscible HC gas injection, polymer flooding and steam injection based on the... 

The use of polymer flooding as one of enhanced oil recovery methods has recently increased. The occurrence of high shear rates in reservoir and near well bore through perforation nozzles during polymer flooding cause shear degradation of polymers and therefore polymer viscosity has decreased. Rheological behavior of polymer solution in different conditions of oil reservoir is one of the key factors to develop use of polymer solutions. A few researches are available regarding improving rheological behavior of polymeric solution. In this study, to investigate the effect of nanoparticles on rheological behavior of polymer solutions two samples were prepared: polyacrylamide solution in water and... 

This paper addresses the impacts of climate change on hydrology and water resources in the Karkheh River Basin (KRB), which is the third most productive basin in Iran and has great potential for hydropower generation. The total potential capacity of reservoirs in this basin is more than 15 ×109 Mm3, of which 40% has been built. The sensitivity of the KRB to potential climate change is investigated by simulating basin streamflow response under different climate change scenarios. A conceptual rainfall-runoff model (IHACRES) was first calibrated by using hydrological and streamflow observations. The model was then applied by downscaling two general circulation model outputs (CGCM3 and HadCM3)... 

In the present paper, spatially variation input effects on seismic responses of arch dams have been studied. Recorded ground accelerations at the dam foundation interface of Pacoima dam during January 13, 2001 were used for the purpose of this investigation. A numerical finite element model was developed for dynamic analysis of the dam reservoir system. The modified version of NSAD-DRI finite element program was used for the analysis and the ground acceleration time histories were interpolated at all dam foundation interface nodal points. Total and pseudo static displacements as well as developed stresses due to uniform and non uniform excitations are obtained. The results reveal that... 

Iran's proved natural gas reserves are the world's second largest. Mainly, because of climate changes and different reservoirs' characterizations, studying the behavior of production fluids and their transportation is essential. One of the main problems which occurs in the gas reservoirs is related to the hydrate formation while producing from a well, either in production strings or production lines (before and after choke). Effective parameters which influence the formation of hydrates are: high pressure, low temperature and water presence; and therefore, the high possibility of having this phenomenon in Iranian reservoirs is quite obvious especially in cold climates and for gas wells....