Sharif Digital Repository

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Spontaneous imbibition of water into the matrix is the most important mechanism for oil recovery in water wet fractured porous media. If the water is in contact with matrix and it is not flowing, the process is called static imbibition. The effect of rock and fluid properties, and boundary conditions on static imbibition are studied and formulated for scaling of the laboratory data to the reservoir scale. In reality, there is a continuous flow in a fracture; incorporating the effect of fracture flow into the scaling formulations is an unresolved issue in the modeling of the capillary imbibition recovery from the matrix. In this article, a new mathematical equation is developed to scale... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

Optimization of any production operation is a tool for increasing production rates and reducing production costs. Water flooding is one of the techniques that frequently be used to increase oil recovery after primary depletion. A methodology for optimizing the production by using the net present value of a heterogeneous reservoir under water flooding has been presented, which is based on controlling the bottomhole pressures of the production wells, using smart well technology. For this purpose, a numerical flow simulator is coupled with an optimization program. The technique was implemented on a synthetic two dimensional oil reservoir with heterogeneous permeability. This optimization... 

The authors present the results of numerical tests and simulations to investigate and analyze the likelihood of asphaltene precipitation and deposition during CO2 flooding in a reservoir. The effects of asphaltene precipitation on oil properties such as oil viscosity and density during miscible CO2 flooding process were elaborated by using Winprop software of Computer Modeling Group. Also oil properties change during CO 2 miscible flooding by numerical slim tube were investigated by a compositional simulator (GEM). A fluid sample of Saskatchewan Reservoir that had been flooded miscibly with CO2 was chosen for performing the sensitivity analyses. The results showed that asphaltene... 

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

Asphaltene deposition has hindered oil production from asphaltenic oil reservoirs through deposition in reservoir rock and surface facilities. This paper investigates the effect of resin on asphaltene deposition at different pressures. To investigate the asphaltene deposition in the presence of resins at reservoir temperature and different pressures, a pressure, volume, and temperature (PVT) visual cell was designed. A high-resolution microscope and image processing software were used to detect and determine the amount of deposited asphaltene as well as its size distribution at different conditions. Two types of Iranian crude oils with different potential of deposition (low and high) were... 

The authors simulated a reservoir by using two-layer perceptron. Indeed a model was developed to simulate the increase in oil recovery caused by bacteria injection into an oil reservoir. This model was affected by reservoir temperature and amount of water injected into the reservoir for enhancing oil recovery. Comparing experimental and simulation results and also the erratic trend of data show that the neural networks have modeled this system properly. Considering the effects of nonlinear factors and their erratic and unknown impacts on recovered oil, the perceptron neural network can develop a proper model for oil recovery factor in various conditions. The neural networks have not been... 

Not only should dams be evaluated for seismic shaking, but their capability to survive potential fault displacement in their foundations should also be assessed. Safety reviews of existing dams suggest that geological-seismic evaluation of some dam sites has failed to recognize the existence of possibly active faults. In this study, the nonlinear seismic behavior of concrete gravity dams, due to relative fault dislocation occurring in foundations, has been investigated. Two types of fault movement, including normal-slip and reverse-slip, have been considered. These two types, combined with the location of fault lines, with respect to the toe, middle, and heel of the dam base, angle of fault,... 

This work concerns simultaneous determination of relative permeability, capillary pressure, pore size distribution (PSD), and residual oil saturation data by optimization of well testing data, and introduces a new capillary pressure relationship, based on the Weibull distribution function, for direct determination of the PSD function from capillary pressure parameters. Three consecutive injection, fall off, and production well tests are performed on a predefined synthetic reservoir through simulation, and an optimization algorithm is used to find the parameters of relative permeability and capillary pressure curves as well as the value of residual oil saturation. The PSD function is also... 

Demands for hydrocarbon production have been increasing in recent decades. As a tertiary production processes, chemical flooding is one of the effective technologies to increase oil recovery of hydrocarbon reservoirs. Retention of surfactants is one of the key parameters affecting the performance and economy of a chemical flooding process. The main parameters contribute to surfactant retention are mineralogy of rock, surfactant structure, pH, salinity, acidity of the oil, microemulsion viscosity, co-solvent concentration, and mobility. Despite various theoretical studies carried out so far, a comprehensive and reliable predictive model for surfactant retention is still found lacking. In this... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

Toe to heel air injection has been studied on non-fractured sandstone models and is found to be a promising enhanced oil recovery method for certain heavy oil reservoirs, such as those in Canada, but its applicability on fractured reservoirs, such as those in the Middle East, is not investigated yet. The objective of this article is to evaluate the effect of fractures geometrical parameters, such as fracture density, orientation, and location, on the performance of the process in laboratory scale. Simulation results showed that toe-to-heel air injection is more applicable on highly networked fractured reservoirs, such as those that occur in Persian Gulf coast compared to lower density... 

This work examines the operational parameters that may influence the performance of toe-to-heel steamflooding in a laboratory-scale simulation model built on the basis of the fluid and rock samples from a fractured, low-permeable, carbonate heavy oil reservoir in Southwestern Iran, called KEM (Kuh-e-Mond). Using vertical (V) or horizontal (H) injectors (I) and producers (P), the effects of different well configurations including VIVP, VIHP, 2VIHP, VI2HP, HIHP, and HI2HP, injectors' traversal distance, producers' traversal distance, and horizontal producer length have been investigated. In summary, the results show that 2VIHP scheme performs best in terms of oil recovery and areal/volumetric... 

This article presents the design and implementation of a microcontroller-based system for the automatic movement of control rods in nuclear reactors of either power or research types. This system is controlled automatically, is linked to a personal computer system, and has manual controlling ability as well. The important features of this system are: automatic scram of the control rods, activation of alarm in emergency situations, and the ability to tune the control rod movement course both upwards and downwards. In this system, a small tank has been improvised as a coolant reservoir for pool type reactors such as Tehran Research Reactor and its water level is continuously adjusted by... 

Scaling analysis of fluid displacement in porous media is a reliable, fast method to evaluate the displacement performance of different oil production processes under various conditions. This paper presents the scaling studies of multiphase fluid flow through permeable media with a special attention to the three-phase immiscible water alternating gas (WAG) flooding under conditions prevailing in many oil reservoirs. The investigations are performed on a heterogeneous reservoir to study in detail the sensitivity of the displacement process to the scaling groups using various combinations of the process controlling parameters. The procedure of Inspectional analysis (IA) was utilized to... 

Advanced reservoir characterization methods can yield geological models at a very fine resolution, containing 1011–1018 cells, while the common reservoir simulators can only handle much lower numbers of cells due to computer hardware limitations. The process of coarsening a fine-scale model to a simulation model is known as upscaling. Predicting the accuracy of simulation results over an upscaled grid with respect to the fine grid is highly important, as it can yield the optimum upscaling process. In this paper, permeability-based and velocity-based a priori error estimation techniques are proposed by introducing image processing-based comparison methods in the context of upscaling. The... 

In this work, impulsive wave generation and propagation generated by landslides are studied numerically for a real case. Maku dam reservoir, in the northwestern of Iran is considered as the case study. Generated wave heights, wave run-up, maximum wave height above the dam crest and the probable overtopping volume have been evaluated, using a two-dimensional numerical model (LS3D). This model is validated using available three-dimensional experimental data for simulating impulsive wave caused by sub-aerial landslides. Based on the results, the generated wave height for first and second scenarios are 12 m and 18 m respectively. The wave height of 8 m is observed close to dam body. Because of...