Sharif Digital Repository

Anchored wall system is one of the common methods used for deep excavation stabilization adjacent to sensitive structures in urban areas. A key aspect of the stability analysis of deep excavations is the amount of deformations occurring on the facing wall and the adjacent structures. In this research, a large number of parametric studies considering all aspects of soil-structure interaction is carried out for different excavation geometries to find the optimal design, and the outcome is shown in the form of design tables and charts. Also, by a GA-PSO algorithm and using the large database obtained from the numerical simulations, a simple equation is developed that can predict the deflections... 

This study proposes predictive equations for estimating the peak-experienced drift ratio of unreinforced masonry walls based on the visual characteristic of the damages. In this regard, a comprehensive database comprised of 190 images associated with 30 unreinforced masonry walls at different drift ratios between 0.0 and 1.1 percent is collected, and the visual features of the progressive damages are extracted. Various image processing filters are implemented to the images to quantify the cracking length and crushing areas. The filters are capable of distinguishing different crack patterns, such as joint cracking and block cracking. In the following, four scenarios are introduced based on... 

After an earthquake, the residual stiffness and strength of structural elements are typically estimated based on a qualitative visual inspection of cracks that is prone to error. In this paper a new approach is proposed to automatically estimate the updated stiffness and strength of damaged unreinforced masonry walls by characterization of crack patterns by a mathematical index. It is shown that structural and textural fractal dimensions of a crack pattern reflect the extent of cracking and the type of cracking or crushing, i.e., whether the cracks pass through joints or whether bricks have been damaged and crushed. Using results of six quasi-static cyclic tests on unreinforced brick masonry... 

The optimum design of reinforced concrete cantilever retaining walls subjected to seismic loads is an extremely important challenge in structural and geotechnical engineering, especially in seismic zones. This study proposes an adaptive sperm swarm optimization algorithm (ASSO) for economic design of retaining structure under static and seismic loading. The proposed ASSO algorithm utilizes a time-varying velocity damping factor to provide a fine balance between the explorative and exploitative behavior of the original method. In addition, the new method considers a reasonable velocity limitation to avoid the divergence of the sperm movement. The proposed algorithm is benchmarked with a set... 

This paper studies the results of compression diagonal tests conducted on a series of retrofitted and non-retrofitted small-scale masonry walls (which are also known as wallettes). Wallettes with the same characteristics and mechanical properties of large masonry walls were retrofitted by using two arrays of glass fiber reinforcement polymer (GFRP) sheets (grid and diagonal), two arrays of carbon fiber reinforcement polymer (CFRP) sheets (grid and diagonal), and near surface mounted bars (steel and GFRP). FRP sheets were applied to both surfaces of the wallettes, and rebar was mounted onto one of the surfaces in two horizontal and two vertical arrangements. All of the methods significantly... 

Displacement-based assessment procedures require as input reliable estimates of the deformation capacity of all structural elements. For unreinforced masonry (URM) walls, current design codes specify the in-plane deformation capacity as empirical equations of interstory drift. National codes differ with regard to the parameters that are considered in these empirical drift capacity equations, but the inhomogeneity of datasets on URM wall tests renders it difficult to validate the hypotheses with the currently available experimental data. This paper contributes to the future development of such empirical relationships by investigating the sensitivity of the drift capacity to the shear span,... 

The current study used the horizontal slices method to develop a new formulation to calculate active pressure on retaining walls. In this method, the failure wedge is assumed to be circular in cohesive-frictional soil. In addition to the formula, graphs are provided to determine the center and radius of failure without need for calculation to determine the pressure exerted on the retaining wall. A comparison of the results of the proposed method with previous methods shows that the active pressure calculated using a circular failure wedge was higher than when using a plate failure wedge; confirming the importance of the circular failure wedge. The proposed method can calculate the shear... 

In this paper, optimal design and assessment of the capability of Tuned Mass Dampers (TMDs) in improving the seismic behavior of Confined masonry walls, as the main element of historical buildings, has been studied. For this purpose, the design parameters of TMDs have been determined through minimization of wall response using Genetic Algorithms (GAs). To simulate the behavior of Confined masonry wall under earthquake, the triple linear shear beam model has been used. For illustration, the method has been tested on Confined masonry walls equipped with linear TMDs. To study the effects of frequency content and Peak Ground Acceleration (PGA) of earthquake records on the performance of TMDs,... 

This paper describes the results of an experimental and numerical study that focused on multi-directional behavior of unreinforced masonry walls and established the requisite of the related proposed design equations. The tests were conducted following several sets of multi-directional loading combinations imposed on the top plane of the wall along with considering monotonic and cyclic quasi-static loading protocols. Various boundary conditions, representing possible wall–roof connections, were also considered for different walls to investigate the influence of rotation of the top plane of the wall on the failure modes. The results of the tests were recorded with a host of high precision data... 

There are numerous studies on the behavior of Unreinforced Masonry (URM) walls in both in-plane (IP) and out-of-plane (OP) directions; however, few aimed at understanding the simultaneous contribution of these intrinsic responses during earthquakes. Undoubtedly, even a strong URM wall shows weakened capacity in the OP direction because of minor cracks and other damages in the IP direction, and this capacity reduction has not yet been accounted for in seismic codes. In this study, performance of three URM walls is evaluated by several numerical analyses in terms of the OP capacity reduction because of IP displacements and failure modes. Several parameters influencing the OP capacity have been... 

Different types of macro-elements have been proposed to simulate the behavior of unreinforced masonry (URM) structures under seismic loads. In many of these, macro-elements URM walls are replaced with beam elements with different hysteretic behaviors. The effect of out-of-plane loading or change of gravity load due to the overturning moment is usually not considered in the behavior of these macro-elements. This article presents interaction curves for bidirectional loadings of unreinforced masonry walls to investigate the importance of these factors. Two parameters are systematically changed to derive the interaction curves for a wall with specific dimensions, including compressive traction... 

In this paper, a simple finite element model for seismic analysis of retaining walls is introduced. The model incorporates nonlinearity in the behavior of near wall soil, wall flexibility and elastic free field soil response. This model can be employed in nonlinear modeling of retaining walls and bridge abutments. The advantages of this model are simplicity and flexibility in addition to acceptable precision. Using this finite element model, an analytical study is conducted on several soil-wall systems using nonlinear time-history analysis by applying real earthquake records. Based on the results of these analyses, new seismic soil pressure distributions are proposed for different soil and... 

In order to evaluate the seismic behavior of confined masonry buildings, based on Iranian seismic code design, a single storey full-scale unreinforced confined brick masonry building has been constructed on the shaking table facility at the Earthquake Engineering Research Center (EERC) of Sharif University of Technology. The 4 by 4 meter model consists of four brick masonry walls confined with reinforced mortar tie-columns and steel bond beams, with a traditional jack-arch roof system. Three of the wall panels contained openings of different sizes and geometries. The model was subjected to the scaled earthquake records of Bam, Tabas and El Centro, as well as a harmonic acceleration with... 

Evaluating the seismic active earth pressure on retaining walls is currently based on pseudo-static method in practices. In this method, however, it is not simple, choosing an appropriate value for earthquake coefficient, which should fully reflect the dynamic characteristics of both soil and loading is an important problem. On the other hand, by using only two extra dynamic parameters that are shear wave velocity of soil and predominant frequency of probable earthquake, one can benefit from another more accurate tool called pseudo-dynamic method to solve the problem of earth pressure. In this study in the framework of limit equilibrium analysis, pseudo-dynamic method has been applied into... 

In this paper a new method of modeling shear force-displacement relationship for confined masonry walls by neural networks has been presented. Although the mathematical models have been very useful in the simulations so far, however developing more accurate models is necessary. While developing precise mathematical models for highly hysteretic materials is itself challenging and practically cumbersome, the use of learning algorithms is an attractive alternative. The issue of material modeling by neural networks has been a challenging one itself, noticing available neural networks have some limitations in the learning of non-linearity. In this paper a new type neural network, called Prandtl... 

In this article, behavior of cantilever retaining walls with various flexibilities, which retain saturated cohesive soil behind, is studied using numerical modeling. Generally, pattern of lateral earth pressure behind retaining walls is complex and this complexity becomes greater for clayey soils. In this investigation, effects of different wall bending stiffnesses, and backfill drainage conditions on the failure height and on the lateral earth pressure are investigated using finite elements. Comparison between the obtained results from numerical simulation and those based on empirical or conventional design methods indicate that soil-structure interaction and c drainage conditions play... 

Most of the studies related to the modeling of masonry structures have by far investigated either the in-plane (IP) or the out-of-plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load-bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement-controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the... 

Stone masonry construction is still a common practice in remote mountainous areas of many developing countries. Field investigations have shown that the traditional construction practices do not usually provide adequate seismic resistance for such buildings. This study was carried out to investigate and improve the construction of single-story stone masonry buildings in terms of safety in extreme events, economy, and ease of construction. The current construction methods were first studied through field investigations, and their deficiencies were identified. Then, improved stone masonry walls were designed that provide some confinement for the masonry by adding steel and reinforced-concrete...