Sharif Digital Repository

The gravity currents on the inclined boundaries are formed when the inflow fluid has a density difference with the ambient fluid and a tangential component of gravity becomes the driving force. If the density difference arises from the suspended particles, the currents are known as particle-laden density currents, or turbidity currents in which the local density depends on the concentration of particles. A low Reynolds k- Turbulent model is used to simulate three dimensional turbidity currents. Also some laboratory tests were conducted to study the 3D flow resulting from the release of particle laden density currents on a sloping surface in a channel of freshwater via a sluice gate. Kaolin... 

Density current is a dense fluid, which is continuously released from a source and spreads down a sloping surface inside a lighter, motionless fluid. A low-Reynolds number k-ε model (Launder and Sharma, 1974) has been used to simulate the behavior of 3-D density currents. Density current with a uniform velocity and concentration enters the channel via a sluice gate into a lighter ambient fluid and moves forward down-slope. The model has been verified with the experimental data sets. Although the k-ε Launder and Sharma model is applied here to a conservative density current, it seems the analysis is valid in general for turbidity current laden with fine particles. Copyright © 2006 by ASME  

Density current is a dense fluid, which is continuously released from a source and spreads down a sloping surface inside a lighter, motionless fluid. A low-Reynolds number k-ε model (Launder and Sharma, 1974) has been used to simulate the behavior of 3-D density currents. Density current with a uniform velocity and concentration enters the channel via a sluice gate into a lighter ambient fluid and moves forward down-slope. The model has been verified with the experimental data sets. Although the k-ε Launder and Sharma model is applied here to a conservative density current, it seems the analysis is valid in general for turbidity current laden with fine particles. Copyright © 2006 by ASME  

This paper represents the detailed results of an evolutionary optimization framework towards the exploration of vortex mechanisms leading to effective anti-vortex film cooling. In this regards, several arrangements of triple cooling holes were studied on flat and curved geometries using differential-evolution optimization algorithm and a modified Reynolds-stress based flow solver. Depending on the flow and geometric parameters, four distinct types of vortex interaction with different cooling mechanisms were identified. The vortex-trapping mechanism, observed in the optimized upstream arrangement acts through imposing a mild downwash over the main counter-rotating vortex pair and provides the... 

A new characteristic-based method is developed and used for solving the mixed and forced convection problems. The nano-fluid flow with heat transfer is simulated with a novel characteristic-based scheme in closed domains with different aspect ratios. For this purpose, a FORTRAN code has been written and developed. Water as a pure fluid and water-titanium dioxide as a nano-fluid were considered. The governing equations are solved by the finite volume utilizing a characteristic-based scheme for the convective fluxes. The simulation is done at Grashof numbers from 100 to 104, Reynolds numbers from 100 to 1000, and volume fractions of nano-particles from 0% to 10%. Streamlines, isotherms,... 

The hydrodynamics and energetics of bioinspired oscillating mechanisms have received significant attentions by engineers and biologists to develop the underwater and air vehicles. Undulating and pure heaving (or plunging) motions are two significant mechanisms which are utilized in nature to provide propulsive, maneuvering, and stabilization forces.This study aims to elucidate and compare the propulsive vortical signature and performance of these two important natural mechanisms through a systematic numerical study. Navier-Stokes equations are solved, by a pressure-based finite volume method solver, in an arbitrary Lagrangian- Eulerian (ALE) framework domain containing a 2D NACA0012 foil... 

This paper investigates the potential of using an active flow control technique to modify stall flutter oscillations of a NACA (National Advisory Committee for Aeronautics) 0015 wing section. Wind tunnel experiments have been performed with a test-rig that provides the elastic degree of freedom in pitch. Measurements of the clean airfoil are taken at preset angles of θ 0 = 6 ° - 12 °, and for Reynolds numbers of R e c = 6.2 × 10 4 - 1.25 × 10 5, which reveal the dependency of the stall flutter oscillations to Rec and θ0. Then, flow control experiments are carried out at θ 0 = 10 ° and R e c = 1.04 × 10 5. Two dielectric barrier discharge plasma actuators have been employed simultaneously to... 

The comparison of aerodynamic characteristics of circular and noncircular bodies using computational-fluid-dynamics (CFD) code and semi-emperical code was discussed. It was observed that the performance of aerodynamic coefficients was better for squared section body at different angles of attack. It was also observed from the study of the flow physics that the pressure difference between the front and back of the body that produce pressure drag was more in the circular body. Results show that the friction drag is more for the square body than the circular body as the surface area of the square body is large  

A high-order compact finite-difference lattice Boltzmann method (CFDLBM) is proposed and applied to accurately compute steady and unsteady incompressible flows. Herein, the spatial derivatives in the lattice Boltzmann equation are discretized by using the fourth-order compact FD scheme, and the temporal term is discretized with the fourth-order Runge-Kutta scheme to provide an accurate and efficient incompressible flow solver. A high-order spectral-type low-pass compact filter is used to stabilize the numerical solution. An iterative initialization procedure is presented and applied to generate consistent initial conditions for the simulation of unsteady flows. A sensitivity study is also... 

The present study addresses a new effort to improve the prediction of the thermal field in separating-reattaching flows by making modifications in a low-Reynolds-number (LRN) version of HOGGDH heat-flux model proposed by Suga and Abe (2000). The modifications are based on introducing non-equilibrium effects of hydrodynamic flow field in the heat-flux model. Using an analytical approach, we have implemented P/ε, ignored in the base version, to the modified version. To do so, the model structure was changed and a damping function which is more sensitive to non-equilibrium flow features is also applied to the model. The modified heat-flux formulation along with a second moment closure... 

For the first time since 1940 and presentation of theodorson's theory, distribution of thrust, torque and efficiency along the blade of a counter rotating propeller axial fan was studied with a novel method in this research. A constant chord, constant pitch symmetric fan was investigated with Reynolds Stress Turbulence method in this project and H.E.S. method was utilized to obtain distribution profiles from C.F.D. tests outcome. C.F.D. test results were validated by estimation from Playlic's analytical method. Final results proved ability of H.E.S. method to obtain distribution profiles from C.F.D test results and demonstrated interesting facts about effects of solidity and differences... 

Effect of using Al 2O 3-water nanofluids with different volume fractions and particle diameters on generated entropy, hydrodynamic performance and heat transfer characteristics of a tangential micro-heat sink (TMHS) was numerically investigated in this research. Results indicated that considerable heat transfer enhancement is possible when using Al 2O 3-water nanofluids as coolant and clearly the enhancement improves with increasing particles concentration and decreasing particles size. However, using nanofluid has also induced drastic effects on the pumping power that increases with particles volume fraction and Reynolds number. Finally, it was found that generated total entropy decreases... 

In present paper the theory of the micropolar fluid based on a Cosserat continuum model has been applied for analysis of Couette flow. The obtained results for the velocity field have been compared with known results from experiments done by Reichardt at Max Plank institute for fluids in Gottingen [1,2] and analytical solution of the problem from Gradient theory by alizadeh[3].the boundary condition used here was the no slip one and Trostel's slip boundary condition[4].a good agreement between experimental results and the results of the problem for Reynolds near 18000 has beeen found. A new dimensionless number introduced that indicates the theoretical relation between cosserat theory and... 

In present paper the theory of the micropolar fluid based on a Cosserat continuum model has been applied for analysis of Couette flow. The obtained results for the velocity field have been compared with known results from experiments done by Reichardt at Max Plank institute for fluids in Gottingen [1,2] and analytical solution of the problem from Gradient theory by alizadeh[3].the boundary condition used here was the no slip one and Trostel's slip boundary condition[4].a good agreement between experimental results and the results of the problem for Reynolds near 18000 has beeen found. A new dimensionless number introduced that indicates the theoretical relation between cosserat theory and... 

In present paper the theory of the micropolar fluid based on a Cosserat continuum model has been applied for analysis of Couette flow and turbulent flow through rough pipes. The obtained results for the velocity field have been compared with known results from experiments done by Reichardt at Max Plank institute for fluids in Gottingen [1,2] and analytical solution of the problem from Gradient theory by alizadeh[3] for couette problem and with known results from experiments done by Nikuradse (1932).the boundary condition used here was the no slip one and Trostel's slip boundary condition[4].a good agreement between experimental results and the results of the problem for Reynolds near 18000... 

The network modeling approach is applied to provide a new insight into the onset of non-Darcy flow through porous media. The analytical solutions of one-dimensional Navier-Stokes equation in sinusoidal and conical converging/diverging throats are used to calculate the pressure drop/flow rate responses in the capillaries of the network. The analysis of flow in a single pore revealed that there are two different regions for the flow coefficient ratio as a function of the aspect ratio. It is found that the critical Reynolds number strongly depends on the pore geometrical properties including throat length, average aspect ratio, and average coordination number of the porous media, and an... 

In this paper, a two dimensional numerical model for two phase flow is presented. For interface tracking, the FGVT-VOF (Fine Grid Volume Tracking-Volume Of Fluid) method is selected. For momentum advection, an improved approach is used. In this scheme, a volume tracking step is coupled with steps of computations for the advection of momentum. A Reynolds stress algebraic equation has been implemented in the algorithm of turbulent modeling. Standard test cases are used for the verification of interface tracking and hydrodynamic modeling in laminar and turbulent conditions. The test results show that this methodology can be used in different applications of two-phase flow modeling. © Sharif... 

Generally speaking, most micro-fluidic mixing systems are limited to the low Reynolds number regime in which diffusion dominates convection, and consequently the mixing process tends to be slow and it takes a relatively long time to have two fluids completely mixed. Therefore, rapid mixing is essential in micro-fluidic systems. In order to hasten the mixing process in micro scale, in this study we come up with a novel scheme for a two dimensional micro-fluidic mixer which encompasses three pairs of electrodes, one pair embedded in the mixing chamber and two pairs located in the micro-channels before and after the mixing chamber. The width of the middle pair is assumed to be twice of the... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different...