Sharif Digital Repository

Due to the decrease in oil reserves in the world, increasing population and the growing demands for oil consumption in the world, increasing the oil recovery from oil reservoirs has become more important. Increasing the amount of oil production efficiency by using low salinity water/modified salinity water has been highly appreciated during the last two decades. Low-salt water is a new method, due to its advantages such as low cost, simplicity of operation and low environmental hazards. It is believed that low salinity water can alter the rock wettability from a more oil-wetting state to a more water-wetting state. In order to be able to predict the performance of low salinity water... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

Gorgan Bay and Miankaleh Wetland have been exposed to various environmental risks in the past years due to the decrease in the Caspian water level and the subsequent decrease in the water level of these water bodies. 2 channels, Chapgoli and Ashuradeh, are the only ways connecting the Gulf with the Caspian Sea. If the water level of the Caspian Sea and the Gulf continue to decrease, these 2 channels will be completely blocked and the connection between the Gulf and the sea will be completely closed. Due to the low depth of the bay and high evaporation on this water body, the blockage of these 2 channels will eventually lead to drying up of the bay or changing the flora and fauna of the area.... 

Due to anthropogenic activities and climate change, Lake Urmia, one of the largest hypersaline lakes, is exposed to desiccating. The increase in salinity in this lake up to more than 400 p.s.u has endangered the ecology of this lake. In this study, a three-dimensional, unstructured grid and finite volume model FVCOM has been developed to investigate Lake Urmia's hydrodynamics, salinity, and water temperature over the year 2016. Some of the model inputs were lake bathymetry, meteorological data (including air temperature and pressure, wind speed and direction, short-wave and longwave radiation), precipitation, evaporation, river flux, salinity, and temperature. The model was calibrated... 

The spatiotemporal dynamic of salinity concentration (SC) in saline lakes is strongly dependent on the rate of water flow into the lake, water circulation, wind speed, evaporation rate, and the phenomenon of salt precipitation and dissolution. Although in-situ observations most reliably quantify water quality metrics, the spatiotemporal distribution of such data are typically limited and cannot be readily extrapolated for either long-term projections or extensive area. Alternatively, remotely sensed imagery has facilitated less expensive and a stronger ability to estimate water quality over a wide range of spatiotemporal resolutions. This study introduces an adaptive learning model that... 

Loess with a dispersion potential is one of the problematic soils of Iran. This study aims to investigate the impact of dispersion potential on the water flow in a three-phase medium and determine the effect of salinity on the stability of an unsaturated railway embankment by employing the soil-water retention curves of the materials. To satisfy this objective, the natural dispersive loess of the Chabahar region is desalinated in this study and the hydraulic properties of both saline and desalinated soils are comprehensively investigated. First, the soil-water retention curves of the materials are measured through the filter paper test method. Afterward, the saturated hydraulic conductivity... 

More than 80% of desalination units in the Persian Gulf use multi-stage flash (MSF) technology. The discharge of effluent from these units sometimes causes severe impacts to the marine environment due to the increase in temperature and salinity around the discharge point. In the current thesis, the geometrical, mixing and turbulence characteristics of the discharge of thermal-saline inclined jets under the water surface, similar to the effluent of MSF units, are numerically investigated by developing the buoyantBoussinesqPimpleFoam solver in the OpenFoam open-source software, using the LES turbulence model and the dynamic Smagorinsky subgrid scale and the UNESCO equation of state. The... 

Various studies have confirmed that water salinity and its composition significantly affect the efficiency of the waterflooding process. Field-scale operation of low-salinity water injection has been proven to be a cost-effective enhanced oil recovery (EOR) method which is also compatible with the environmental regulations. Although this method has satisfactory results, it faces some challenges, such as in-situ mixing of the injection low-salinity water with the saline water in the host reservoir. The salinity of the injected water increases, as it contacts the high-salinity reservoir brine in the pores. This phenomenon significantly impairs the efficiency of this technique, and increases... 

Considering the water tensions, especially in the Middle East, water resources for the implementation of water-based EOR methods are shown to be critically limited. Water sources such as industrial wastewater hold great potential to be used for this purpose due to their significant available volume and the need for their disposal because of environmental regulations. In this research, the potential of injecting industrial wastewater, as low-salinity water, in an Iranian carbonated oil reservoir has been thoroughly investigated by conducting core-scale experiments. In this regard, we also developed a guideline for designing various types of experiments to use this "unconventional" injection... 

Low-salinity waterflooding (LSWF) is a promising EOR approach that decreases the oil-wetness of reservoir rocks, hence increasing the recovery factor. Despite the importance of the pore-geometry on the performance of LSWF, especially in 3D simulations being affected by corner-flow and roughness, it is not yet investigated, thus in this thesis we aim at studying the aforementioned effects on LSWF. According to the preceding studies, during the drainage phase, the brines in the corners of pores cannot be displaced by oil because of requiring very high capillary pressure; thereby rendering a mixed-wet system. Hence considering this type of wettability is necessary for two-phase flow... 

Water injection, as one of the conventional methods to increase the oil recovery factor has always been at the center of research works for Enhanced Oil Recovery (EOR). The conducted studies show that by controlling the amount and type of ions in the injected water, the recovery efficiency can be improved. In the meantime, most of the investigations are focused on the interaction between water/rock/oil to trace the wettability alteration. However, these interactions especially between the injected water and the oil phase, would lead to change of surface charge distribution of the reservoir rock. Besides, this effect can change some of the characteristics of the fluid phases, especially in... 

Recent studies have shown that the injection of low-salinity water would enhance the oil recovery factor for both the core scale and the field test. The evidence obtained from laboratory studies showed that the control of salinity and the composition of injected water has successfully affected the oil release, hence enhancing the oil recovery efficiency. In this method, by changing the type and amount of dissolved ions in the injected water, the water/oil/rock interactions are altered. Based on this, extensive studies have been focused on the mechanisms for the trapped oil release at the pore scale. Several mechanisms have been proposed to explain this phenomenon, which can be divided... 

So far, many studies have been carried out on the core-scale regarding the effects of hysteresis on the macro-scale properties of systems including fluids and porous rock, however, many issues related to the physics of the problem (especially regarding the way fluids are distributed and the trapping of the non-wetting phase) at the pore-scale need further investigation. In the process of multiphase fluid flow in porous media, hysteresis refers to the dependence of the results of the fluids’ displacements on the history of fluid saturation and the direction of saturation changes (increasing or decreasing). The first step to investigate the hysteresis effect is to determine the amount of fluid... 

Considering the world's diminishing oil reserves, as well as the growing demand for oil and energy consumption, Enhanced Oil Recovery (EOR) techniques are becoming increasingly important in the attempt to improve oil production. Engineering salinity waterflooding has gained widespread attention and popularity in the last two decades due to its environmental friendliness, lack of expensive additives, low operating costs, and ease of use as an oil extraction process. The goal of this study is to use an innovative method to develop a mechanistic approach model that simulates and forecasts the mechanism and performance of the engineered water flooding process. Wettability alteration, the most... 

Gas injection is one of the most common methods to enhance oil recovery. But due to the low viscosity and density of gas, viscous fingering and gravity over ride usually happens which lead to reduction of gas injection performance to oil production. Foam injection is one of the techniques that has the potential to improve oil production by increasing. Foam apparent viscosity is higher than gas and its liquid which is made from it. So it can increase sweep efficiency and enhance oil recovery. However, presence of oil can destabilize foam. Beside, salinity has different effects on foamability and foam stability. Foam stability in high saline environment is a challenge. Therefore, the stability... 

Water injection is known as one of the most efficient and affordable techniques to displace the oil in the reservoirs. To increase oil recovery efficiency through water injection operation, recently low salinity water injection or water containing a certain amount of effective ions (engineered/low salinity water) is proposed. Besides, improving this technique is also adopted in the oil industry using certain chemicals like surfactants to change the interfacial tension or rock wettability for more oil recovery. In order to study and model the mechanisms involved during surfactant flooding, molecular dynamics simulation is utilized here as a novel technique. The advantage of this method over... 

Based on numerous laboratory and field evidence, low-salinity waterflooding or engineered salinity waterflooding can lead to enhanced oil production. According to the literature, the mechanisms involved in this process can be divided into two general categories: fluid-fluid interactions and solid-liquid interactions. These mechanisms are caused by intermolecular and electrostatic forces at the rock and fluid interfaces. The most important controlling factor of the electrostatic forces is the concentration of ions at/near fluids-rock interface. Therefore, improving the concentration of ions causes a shift in wettability toward a more water-wetting state, eventually leading to increased oil... 

Low salinity water flooding (LSWF) is one of the enhanced oil recovery (EOR) methods that can be applied in both secondary and tertiary recovery techniques. Some reports indicate no incremental oil recovery associated with this method, and the reason can be associated with the binary and tertiary interactions between oil-brine-rock (OBR) systems. In some OBRs, the initial conditions are not favourable in terms of initial wettability. One of the key factors is the local rock heterogeneities in permeability and mineralogy which can affect LSWF performance because the microscopic and macroscopic heterogeneities can impact the flow pattern of the injected water, oil displacement efficiency, and... 

Enhanced Oil Recovery (EOR) techniques have become of the main priorities of the oil industry during the high oil price era. It is interesting to note that the common method to increase production from reservoirs is the water injection method, which recovers a very low amount of oil from the oil-wet matrices due to the lack of water imbibition. Previous studies have shown that changing the wettability of rock would critically increase the oil recovery efficiency. This could be achieved by the low-salinity water injection method. In recent years, extensive studies have been conducted on this technique to evaluate its effectiveness for various types of oil reservoirs. Simultaneous injection...