Sharif Digital Repository

This paper proposes a new energy management model for residential buildings to handle the uncertainties of demand and on-site PV generation. For this purpose, the building energy management system (BEMS) organizes a transactive energy (TE) market among plug-in electric vehicles (PEVs) to determine their charge/discharge scheduling. According to the proposed TE framework, the PEV owners get reimbursed by the BEMS for the flexibility they offer. In this regard, the PEV owners submit their response curves for reimbursement upon arrival. Then, the BEMS solves an optimization problem to maximize its own profit and determine the real-time TE market-clearing price. Afterward, based on the clearing... 

SiO2-CaO-MgO glass and glass-ceramic powder doped with Nd 3+ were synthesized with sol-gel method. Tetraethylorthosilicate (TEOS), Ca(NO3)2·4H2O, Mg(NO 3)2·6H2O, Nd(NO3) 3·6H2O, ethanol, distilled water, and HNO 3 were used as starting materials. The synthesized powder's properties were examined with simultaneous thermal analysis (STA), X-ray diffraction (XRD), photoluminescence (PL) and scanning electron microscopy (SEM) analysis. The STA curves showed that the softening point and crystallization temperatures were shifted to higher temperatures with increasing dopant content. Regarding XRD patterns of glass samples, Nd was found to act as an intermediate oxide in glass matrix. The XRD... 

Discharge characteristics of nanorods (NRs), microsized and nanosized copper (II) oxide (CuO) particles prepared via thermal decomposition and thermal oxidation routes are examined as cathode materials of a Zn/CuO cell without membrane separators. The electrochemical discharge is examined galvanostatically at a current density of 500 mAg−1 and reveals that the first discharge cycles of all the CuO materials contain one potential plateau; subsequent discharge cycles involve three potential plateaus. Each potential plateau is due to an electrochemical reaction. The first, second, and third potential plateaus are attributed to Cu2O3, CuO, and Cu2O discharges,... 

Glass-ceramic composites in the SiO2-CaO-MgO-(Na2O) system, reinforced with 5, 10 and 20 wt.% aluminum titanate were synthesized by pressureless sintering. Optimum sintering temperatures with maximum relative density were determined for each composition. The composites were fired above the crystallization peak temperature of glass-ceramic. Mechanical properties of glass-ceramic and sintered composites, such as fracture toughness, flexural strength and Vickers microhardness, were investigated. The sintered composites were characterized by scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray diffraction (XRD). The results showed that the composite containing 10... 

In this research, an attempt was made to improve TiO2 photo-catalyst properties, thus pure, N-Ce co-doped TiO2 thin films were prepared on glass-ceramic substrate using a sol-gel dip-coating technique. The samples were calcinated in air at 475 °C, 550°C, and 650°C for 2 h. The result of simultaneous thermal analysis (STA) and X-ray diffraction (XRD) showed that the presence of Ce in TiO2 could inhibit the phase transformation from anatase to rutile and enhance the thermal stability, and anatase was the dominant phase in N-Ce co-doped TiO2 samples. Also based on the results, the doping results in decreasing the size of TiO 2 crystallite. The results of ultra violet-visible light diffuse... 

Implementation of various incentive-based and time-based load management strategies has great potential to decrease peak load growth and customer electricity bill cost. In recent years, developments in Plug in Hybrid Electric Vehicles (PHEVs) have provided various environmental and economic advantages. However, high penetration of electric vehicles in to the grid may cause high peak loads at different times of the days. Using advanced metering and automatic chargers makes it possible to optimize the charging cost, and release generation capacities to provide sustainable electricity supply. Using an appropriate encouraging program is a simple way for vehicle owners to manage their energy... 

Here, we report 3D hierarchical SnO2 nanowire (NW) core-amorphous silicon shell on free-standing carbon nanotube paper (SnO2@a-Si/CNT paper) as an effective anode for flexible lithium-ion battery (LIB) application. This binder-free electrode exhibits a high initial discharge capacity of 3020 mAh g-1 with a large reversible charge capacity of 1250 mAh g-1 at a current density of 250 mA g-1. Compared to other SnO2 NW or its core-shell nanostructured anodes, the fabricated SnO2@a-Si/CNT structure demonstrates an outstanding performance with high mass loading (∼5.9 mg cm-2), high areal capacity (∼5.2 mAh cm-2), and large volumetric capacity (∼1750 mAh cm-3) after 25 cycles. Due to the... 

The present work describes the preparation and electrochemical characterization of RuO2/MWCNT/Stainless Steel Mesh (SSM) electrode as compared with a MWCNT/SSM electrode in the positive half-cell of a Vanadium Redox Flow Battery (VRFB). The electrochemical characterization of prepared electrode was carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The electrochemical activity of MWCNT/SSM modified with RuO2 as positive electrode in a VRFB was notably improved. The RuO2-included electrodes demonstrated high peak current ratio, small peak potential difference and high electron... 

In this study, lithium disilicate glass-ceramic in the TiO2-ZrO2-Li2O-CaO-Al2O3-SiO2 system was investigated for dentistry applications by incorporation of P2O5 and Nb2O5 as nucleation agent. The influence of the particles size (nano and submicron size) and nucleating agents on the crystalline phases, microstructure, crystallization mechanism and mechanical properties were investigated. Our data indicated that in ceramic glass with nano and submicron P2O5, the main crystalline phase was lithium disilicate. The results also showed that change of P2O5 particle's size had significant effect on the crystalline phases and microstructure. By replacement of submicron P2O5 with submicron Nb2O5,... 

Foaming and crystallisation behaviours of compacted glass powders based on a diopside glass-ceramic composition were investigated using the sintering route. The foaming agent was 2 wt.% SiC particles. The effect of PbO on the foaming ability of glasses was investigated. The results showed that the addition of PbO not only improved the foaming ability, by improving the wettability of the glass-SiC particles but also increased the crystallisation temperature and widened the temperature interval between the dilatometric softening point and the onset of crystallisation. The glass-SiC wetting angle was decreased from 85°for the lead-free glass, to 55°for the glass that contains 15 wt.% PbO  

Battery chargers are fundamental components for successful deployment of plug-in hybrid electric vehicles (PHEVs) into future smart grid. Recently, an integrated isolated bidirectional battery charger has been proposed for PHEV applications. The proposed charger eliminates the conventional bulky dc-link capacitor by feeding a dual-bridge resonant tank directly from the three-phase grid. The disadvantages associated with the presented charger are the high number of semiconductor switches which contribute to high cost and switching losses of converter as well as complicated control circuitry. In this paper, the previous structure is modified to address the aforementioned drawbacks and is... 

Battery Electric Vehicles (BEVs) are a promising solution for reducing the impacts of passenger vehicles on the environment. However, their driving range is restricted due to the limitations of battery technologies. This range can be extended by adoption of multiple-speed transmissions. Most of the comparisons in the related studies are based on non-optimal designs or limited to modal driving cycles. Furthermore, the impact of Power-Split. Continuously Variable Transmission (PS-CVT) layout with type III power How on the power consumption of BEVs has never been examined. In this paper, single-, two-, and three-speed transmissions along with PS-C'VTs with type I and III power flows are... 

Battery Electric Vehicles (BEVs) are a promising solution for reducing the impacts of passenger vehicles on the environment. However, their driving range is restricted due to the limitations of battery technologies. This range can be extended by adoption of multiple-speed transmissions. Most of the comparisons in the related studies are based on non-optimal designs or limited to modal driving cycles. Furthermore, the impact of Power-Split. Continuously Variable Transmission (PS-CVT) layout with type III power How on the power consumption of BEVs has never been examined. In this paper, single-, two-, and three-speed transmissions along with PS-C'VTs with type I and III power flows are... 

This paper presents a decentralized load sharing and power management method for an islanded microgrid composed of PV units, battery units and hybrid PV/battery units. The proposed method performs all the necessary tasks such as load sharing among the units, battery charging and discharging and PV power curtailment with no need to any communication among the units. The proposed method is validated experimentally  

Due to non-linear factors such as the rate capacity and the recovery effect, the shape of the battery discharge curve plays a significant role in the overall lifetime of the batteries. Accordingly, this paper proposes a simple heuristic battery-aware speed scheduling policy for periodic and non-periodic real-time tasks in Dynamic Voltage Scaling (DVS) systems with non-negligible leakage/static power. A set of comprehensive analysis has been conducted to compare the battery efficiency of the proposed policies with an optimal solution, which could be derived via the Calculus of Variations (CoV). These evaluations have taken into account both periodic and non-periodic tasks in DVS-based... 

Novel Na3MnCO3PO4 (NMCP)/reduced graphene oxide (rGO) nanocomposite was successfully synthesized via one-step hydrothermal method. The produced materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetry (TG), galvanostatic charge/discharge test and inductively coupled plasma optical emission spectroscopy (ICP-OES). Obtained results indicate the formation of ∼25 nm NMCP nanoparticles randomly distributed on rGO sheets. As a promising cathode material for Na-ion batteries, the hybrids deliver gravimetric discharge capacities of... 

Two and three dimensional modeling of a single cell of vanadium redox flow battery has been done thoroughly according to electrochemical and fluid mechanic equations in this study. The modeling has been done in stationary state and its results have been presented in three chemical, electrical and mechanical sub models. The parametric analysis on some of important factors in cell operation demonstrated that increase in electrode and membrane conductivity and electrode porosity contributes to electric potential increase in cells. Also operational temperature increase leads to decrease in cells' voltage. Better fluid distribution on the electrode surface area results in better cell operation,... 

Demand for high-capacity, long cycle life, and aqueous batteries based on abundant metals such as nickel, zinc, aluminum, and so on is rising in the energy storage field. In this study, we design a hierarchical morphology as a nanosheet-built microsphere of nickel vanadium layered double hydroxide (NiV LDH) with conductive agents graphene oxide (GO) and multiwalled carbon nanotubes (CNTs) through a low-cost hydrothermal synthesis method. The experimental results demonstrate that the graphitic structures and functional groups of the GO and CNT play an important role in controlling nucleation, growth speed, size, and finally morphology of hierarchical nanosheets. The electrochemical results... 

Lead-acid battery is a storage technology that is widely used in photovoltaic (PV) systems. Battery charging and discharging profiles have a direct impact on the battery degradation and battery loss of life. This study presents a new 2-model iterative approach for explicit modelling of battery degradation in the optimal operation of PV systems. The proposed approach consists of two models: namely, economic model and degradation model which are solved iteratively to reach the optimal solution. The economic model is a linear programming optimisation problem that calculates the optimal hourly battery use profile based on an assumed value of the battery degradation cost. The degradation model,... 

Nowadays, the high penetration of renewable energy resources, with variable and unpredictable nature, poses major challenges to operation and planning studies of power systems. Employing energy storage systems (ESSs) has been introduced as an effective solution to alleviate these challenges. Several studies have been presented in the literature to provide a framework for expansion planning studies of ESSs. However, they usually have two main drawbacks: i) ignoring the positive effect of independent-locally operated ESSs on the bulk power system preferences, ii) inability to model the charge/discharge schedule of independent-locally operated ESSs based on their investors' acceptable risk...