Sharif Digital Repository

In this work, a general semi-analytical method for the determination of the elastic fields within an anisotropic homogeneous elastic solid with an inclined edge or interior crack is developed. In this method, the displacement field is represented as a sum of a function and a finite series of functions with unknown coefficients. The functions are constructed in such a way that all the essential homogeneous and inhomogeneous boundary conditions are satisfied exactly and, moreover, the displacement discontinuity across the crack faces as well as the exact singular behaviour of the stress field at the crack-tip are captured. The unknown coefficients are determined by utilizing the principle of... 

Elastic stability of shell structures under certain loading conditions is characterized by a dramatically unstable postbuckling behavior. The presence of simultaneous 'competing' buckling modes (corresponding to the same critical buckling load) is understood to be largely responsible for such behavior. In this paper, within the framework of linear bifurcation eigenvalue analysis and Donnell shallow shell theory, the presence of simultaneous buckling modes in axially compressed isotropic cones is determined using the semi-analytical method of Galerkin. The results are presented in the plane of the dimensionless reciprocal meridional and circumferential buckling half wavelengths, and are... 

Tunnels constructed using New Austrian Tunnelling Method (NATM) are always based on certain round (unsupported) advance lengths, after which, the temporary lining is placed. The settlement of the ground surface resulting from such construction is of high significance in design and practice. The existing data in this respect, however, is scarce. It is the aim of this paper to propose a semi-analytical procedure based on three-dimensional finite element analyses to predict the maximum surface settlement of the ground in NATM tunnels under different combinations of tunnel diameter, overburden depth, round length and soil and lining properties. The comparison of the results with three case... 

Free vibration analysis of moderately thick rectangular FG plates on elastic foundation with various combinations of simply supported and clamped boundary conditions are studied. Winkler model is considered to describe the reaction of elastic foundation on the plate. Governing equations of motion are obtained based on the Mindlin plate theory. A semi-analytical solution is presented for the governing equations using the extended Kantorovich method together with infinite power series solution. Results are compared and validated with available results in the literature. Effects of elastic foundation, boundary conditions, material, and geometrical parameters on natural frequencies of the FG... 

A rather new semi-analytical method towards investigating the free vibration analysis of generally laminated composite beam (LCB) with a delamination is presented. For the first time the combined effects of material couplings (bending-tension, bending-twist, and tension-twist couplings) with the effects of shear deformation, rotary inertia and Poisson's effect are taken into account. The semi-analytical solution for the natural frequencies and mode shapes are presented by incorporating the constraint conditions using the method of Lagrange multipliers. To verify the validity and the accuracy of the obtained results, they were compared with the results from other available references. Very... 

In this paper, the responses of shape memory polymer (SMP) helical springs under axial force are studied both analytically and numerically. In the analytical solution, we first derive the response of a cylindrical tube under torsional loadings. This solution can be used for helical springs in which both the curvature and pitch effects are negligible. This is the case for helical springs with large ratios of the mean coil radius to the cross sectional radius (spring index) and also small pitch angles. Making use of this solution simplifies the analysis of the helical springs to that of the torsion of a straight bar with circular cross section. The 3D phenomenological constitutive model... 

In automobile painting industries, new automobile body products frequently should be tested in order to determine the actual thermal behavior of a paint curing process before starting mass production. During the hardening processes of dipped paint coating, applied in the electrophoretic enameling process, or top paint coating, applied in the final coating process, the automobile body must be warmed up according to the specific paint manufacturer curve. Consequently, prediction of car body temperature during the curing process may be vital in the design and performance analysis of the paint ovens. Numerical simulation of these processes may reduce expensive and time-consuming experimental... 

The requirement of reliable relative permeability data is more intensified when the miscibility condition approaches. In this work the relative permeability of CO2 and oil has been measured at different miscibility conditions using conventional methods. Fractured dolomite and sandstone core plugs samples were used in the experiments. Due to some errorful assumptions of conventional methods such as immiscible, incompressible displacement, inverse modeling was used for predicting the reliable relative permeability of oil and gas phases at near miscible condition from measured oil production and pressure drop data. The initial guesses of relative permeabilities were provided from conventional... 

In this paper, free vibration of a fiber reinforced composite cylinder in which volume fraction of its fibers vary longitudinally, is studied using a semi-analytical method. The distribution of volume fraction of fiber in base matrix is based on power law model. A micromechanical model is employed to represent its mechanical properties including elastic and physical properties of this composite cylinder. In addition, kinematically the first order shear deformation shell theory is employed for strain field. Then, weak form formulation and spatial approximations of variables are utilized to discretize the equations of motion. Different problems are solved in which primarily the validity of the... 

The analysis of the capture zone of wells is useful to design pumping systems and wellhead protection programs. In this study, an analytical solution for the head distribution of a partially penetrating well, and semi-analytical methods to determine the geometry of the capture surface are presented. The analytical solution is derived based on an infinitesimal radius under a constant pumping rate in a two-zone confined aquifer. Using the developed solution, a sensitivity analysis is performed to study the influence of skin on the drawdown, location of the stagnation point, maximum horizontal and vertical extent of the capture surface. The results show the efficiency of a partially penetrating... 

This study presents a semi analytical solution for the transient weakly underexpanded jet. Different polytropic processes are compared with available experimental data in the literature to assess the best process for steady and transient weakly underexpanded jets. The steady state results agree reasonably well with the experimental and analytical data. It is also shown that isentropic process evaluates steady injection better than other processes. Tip penetration of transient results was compared with available data in literature, and no exact agreement for isothermal and isentropic is observed. This appears due to the linearization of equation of state. It is suggested that more accurate... 

In this paper, based on Kirchhoff plate theory (CLPT), vibration analysis of an arbitrary nonlinear variable thickness annular isotropic plate which is covered with piezoelectric layers on the top and bottom surfaces in a short circuit state is performed using a semi-analytic method, named modified wave method (MWM). The plate is partitioned into several continuous segments with constant thicknesses, for which there exists exact analytical solutions. Considering wave method, the solution of each segment is assumed to be the combination of waves moving forward and backward, and at each step, waves in positive and negative directions are obtained in terms of waves at the inner edge of the... 

A semi-analytical method is presented to calculate the dynamic responses of a rectangular plate due to a moving oscillator. In previous analytical solutions of the moving oscillator problem, the elastic distributed structure has usually been modeled by an elastic beam structure. This restrictive assumption is removed in this study by assuming a general plate as two-dimensional elastic distributed structure. The method can be applied for any arbitrary path on the plate. A combination of the Fourier and Laplace transformation as well as the convolution theorem is used to solve the governing differential equations of the problem. A modified integration technique is then presented to solve the... 

The need for antennas with improved characteristics for communication and radar applications has resulted in an ever-increasing demand for research in the field of high impedance surfaces, which can work as an artificial magnetic conductor. One method in fabrication of these surfaces is formation of a metamaterial by patterning a metallic surface in the shape of space filling curves (e.g. Hilbert or Peanu Curves). In this paper, we present a novel semi-analytical solution to the problem of plasmonic propagation on these surfaces. The method is based on a previously presented Green's function formalism, which has been reported in an earlier paper of ours. We have modified and improved the... 

A semi-analytical three-dimensional elasticity solution for rotating functionally graded disks for both of hollow and solid disks is presented. The aim is to generalize an available two-dimensional plane-stress solution to a three-dimensional one. Although for the thin disks problems the two-dimensional solution provides appropriate results, for the thick disks, a three-dimensional elasticity solution should be considered to avoid poor results. It is shown that although the plane-stress solution satisfies all the governing three-dimensional equations of motion and boundary conditions, it fails to give a compatible three-dimensional strain field. A valid three-dimensional solution has been... 

A semi-analytical method is proposed to solve the equations governing a bi-directionally pumped Raman amplifier through continuous-spectrum radiation. The governing equations are systems of uncountable Nonlinear Ordinary Differential Equation (NODE). By applying the moment method, the uncountable system of NODE is reduced to a system of finite number of NODEs. This system of equations is solved numerically and the results are compared with that of the full numerical method. It was shown that the moment method is a powerful and efficient technique for the analysis of a bi-directionally pumped Raman amplifier through continuous-spectrum radiation  

The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion. The results showed dominance of mode I fracture on crack growth, and based on the observation of strain energy density factor versus crack orientation, the results also suggest that depending on the crack length, the most critical orientations of cracks are at 0° to 20° outward the contact zone. Good... 

In this article, transverse vibration of an Euler-Bernoulli beam carrying a series of traveling masses is analyzed. A semi-analytical approach based on eigenfunction expansion method is employed to achieve the dynamic response of the beam. The inertia of the traveling masses changes the fundamental period of the base beam. Therefore, a comprehensive parametric survey is required to reveal the resonance velocity of the traversing inertial loads. In order to facilitate resonance detection for engineering practitioners, a new simplified formula is proposed to approximate the resonance velocity