Sharif Digital Repository

Polyacrylonitrile (PAN) grafted chitosan was prepared by ceric-initiated graft polymerization of acrylonitrile onto chitosan in a homogenous medium. The copolymer chitosan-g-PAN product was then hydrolyzed to yield a novel smart hydrogel (H-chitoPAN) with superabsorbing properties. The influence of add-on values as well as temperature and time of hydrolysis of the initial chitosan-g-PAN on swelling behavior of the hydrogel was evaluated in water and various salt solutions. The swelling kinetics of the superabsorbing hydrogel was studied as well. The hydrogels exhibited ampholytic and pH-sensitivity characteristics. Several sharp swelling changes were observed in lieu of pH variations in a... 

In this paper, we have discussed the results of sensitivity analysis in a payoff matrix of the Matching Pennies game. After representing the game as a LP model, the sensitivity analysis of the elements of the payoff matrix is presented. The game value and the optimal strategies for different values of parameters are determined and compared  

To synthesize a novel biopolymer-based superabsorbent hydrogel, 2-acrylamido-2-methylpropanesulfonic acid (AMPS) was grafted onto kappa-carrageenan (KC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N',N'-tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N'-methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for KC-g-AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature,... 

This paper presents a new method to simultaneously optimize components' size, set points of the control system and slope of PV panels of standalone hybrid energy systems (HESs) using the Passive Congregation PSO (PSOPC) approach. New control set points are defined for the HES, and a new operation strategy is presented based on the defined set points. The optimization algorithm determines the optimal values of the set points to efficiently optimize the HES operation. The effectiveness of the proposed control set points is finally verified through some numerical analyses. In this regard, the proposed optimization method is employed to optimize various HES configurations and compared with other... 

The business activities of the majority of industrial and commercial customers are dependent on some critical equipments that are susceptible to voltage sag events. This paper aims to propose a novel approach to estimate the financial impacts of voltage sag events on customer operations. The proposed technique is based on the event tree method. Using this approach, it is possible to consider the impacts of operational failure of various sensitive equipments, involved in the customer operations, on the financial losses expected from voltage sag events. A quantitative case study is conducted in the paper to illustrate the applicability of the proposed approach  

Modern commercial operations consist of critical equipments that are more susceptible to voltage sag events. The consistent and smooth running of these operations is often disrupted by voltage sags. Diverse range of solutions exist which can enhance the ride through capability of sensitive devices. This paper presents various voltage dip mitigation solutions and a methodology for analyzing the effectiveness and practical viability of these solutions. The proposed approach is based on event tree method which gives an indication about the extent of process interruption in the event of voltage sags. A case study is conducted in the paper with different combinations of practical mitigation... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

Realistic description of fractured reservoirs demands primarily for a comprehensive understanding of fracture networks and their geometry including various individual fracture parameters as well as network connectivities. Newly developed multiple-point geostatistical simulation methods like SIMPAT and FILTERSIM are able to model connectivity and complexity of fracture networks more effectively than traditional variogrambased methods. This approach is therefore adopted to be used in this paper. Among the multiple-point statistics algorithms, FILTERSIM has the priority of less computational effort than does SIMPAT by applying filters and modern dimensionality reduction techniques to the... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

The vapor extraction process (or VAPEX) uses vaporized solvents injected into a horizontal well to form a vapor chamber within the reservoir. Vapor dissolves in the oil and enhances the oil production by decreasing the oil viscosity in heavy oil reservoirs. To evaluate the process we conduct a simulation study on an Iranian heavy oil reservoir called Kuh-e-Mond. In addition, a semi-analytical investigation of the VAPEX process has been performed. The idea is to perform VAPEX simulation for a laboratory model and find a methodology to compare the results of the simulator with the semi-analytical Butler's model. In particular, a semi-analytical dimensionless correlation for production rate... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

A fast high-performance liquid chromatography-diode array detection (HPLC-DAD) approach combined to solid phase extraction (SPE) as a pre-concentration step is developed for simultaneous determination of five selected pharmaceuticals (carbamazepine, naproxen, diclofenac, gemfibrozil and mefenamic acid) in water samples. The effective factors on the efficiency of SPE procedure are optimized using faced-centered central composite design (FCCD). In addition, multi-response optimization by using Derringer's desirability function is used to find the optimum experimental conditions for extraction of analytes from well and river waters. Due to the complexity of water matrices and the presence of... 

There is still an open question of how to prepare high-performance counter electrodes for dye solar cells (DSCs) at room temperature; a requirement for flexible DSCs. Here, we introduce Pt deposited cube-like chromium coating as a low-temperature highly-efficient counter electrode for DSCs. Cr is a chemically stable metal and can be easily electroplated on conductive substrates with high roughness (here ∼160 nm) and cube-like appearance. A cyclic electrochemical deposition method with optimized temperature and number of cycles is used to grow Pt nanoparticles on this surface and charge transfer resistance as low as 0.54 Ω cm2 and 0.27 Ω cm2 were obtained at 40 °C and 55 °C solution... 

Light scattering, porosity, surface area, and morphology of TiO2 working electrode can affect the power conversion efficiency of dye -sensitized solar cells dramatically. Here mesoporous TiO2 microbeads were tested as working electrode in dye-sensitized solar cells based on cobalt tris-bipyridine electrolyte. Power conversion efficiencies up to 6.4% were obtained with D35 dye adsorbed onto the light-scattering microbeads. Electron transport, studied using small light perturbation methods, was found to be significantly faster in the microbead films than in standard mesoporous TiO 2 films. This was attributed to the favorable assembly of nanocrystals in the microbeads, which can increase the... 

For the first time, a new platform based on electrochemical growth of Au nanoparticles on aligned multi-walled carbon nanotubes (A-MWCNT) was developed for sensitive lable-free DNA detection of the TP53 gene mutation, one of the most popular genes in cancer research. Electrochemical impedance spectroscopy (EIS) was used to monitor the sequence-specific DNA hybridization events related to TP53 gene. Compared to the bare Ta or MWCNT/Ta electrodes, the synergistic interactions of vertically aligned MWCNT array and gold nanoparticles at modified electrode could improve the density of the probe DNA attachment and resulting the sensitivity of the DNA sensor greatly. Using EIS, over the extended... 

Although CO2 injection significantly increases the amount of oil recovered, it can cause asphaltene deposition in oil reservoirs. Asphaltene deposition leads to formation damage, in which treatment is a costly and problematic operation. In this work, impact of asphaltene precipitation and deposition during CO2 injection are investigated for recombined oil both in sandstone and carbonate core samples through dynamic flow experiments. Injection of oil and CO2 was performed simultaneously. Then, pressure drops along the core were recorded continuously to estimate permeability reductions during the experiments. Online viscosity of injected fluid was measured by a designed capillary viscometer.... 

A new strategy for enhancing the efficiency of TiO2 dye-sensitized solar cells (DSSCs) by design of a new double-layer film doped with Zn ions, with various morphologies and phase compositions, is reported. X-ray photoelectron spectroscopy (XPS) revealed that Zn2+ (in the range 0.25-0.1 at.%) was successfully incorporated into the TiO2 lattice without forming secondary phases. X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM) analyses showed that the synthesized nanoparticles had nanometer grains with different phase compositions and average crystallite sizes in the range of 8-48 nm, depending upon Zn atomic percentage. UV-vis absorption verified that Zn... 

PbS nanoparticles were in situ deposited on graphene sheets by a successive ionic liquid adsorption and reaction method to prepare a graphene/PbS composite counter electrode for CdS/CdSe quantum dot sensitized solar cells (QDSCs). Under 1 sun illumination, the cells with graphene/PbS counter electrodes (CEs) show a maximum energy conversion efficiency of 2.63%, which is remarkably higher than that of those employing PbS (1.28%) or graphene (0.23%) CEs. Electrochemical impedance spectroscopy analysis shows that graphene/PbS composite counter electrodes have lower charge-transfer resistance at the interface of the CE and the polysulfide redox electrolyte, compared to those cells with PbS and... 

Bacteriorhodopsin is a heptahelical protein found in the purple membrane of Halobacterium salinarum. The performance of bacteriorhodopsin was evaluated as a sensitizer in dye-sensitized solar cells (DSSCs). Bacteriorhodopsin was efficiently immobilized on the titanium dioxide nanoparticles and then tested for its ability to convert solar radiation to electricity. The photovoltaic performance of DSSC based on the bacteriorhodopsin sensitizer has been examined. Under AM1.5 irradiation, a short-circuit current of 0.28 mA cm−2, open-circuit voltages of 0.51 V, fill factor of 0.62, and an overall energy conversion efficiency of 0.09 % are achieved employing platinum as a counter electrode. Carbon... 

Luminescence downshifting (LDS) of light can be a practical photon management technique to compensate the narrow absorption band of high-extinction-coefficient dyes in dye-sensitized solar cells (DSSCs). Herein, an optical analysis on the loss mechanisms in a reflective LDS (R-LDS)/DSSC configuration is reported. For squaraine dye (550-700 nm absorption band) and CaAlSiN3:Eu2+ LDS material (550-700 nm emission band), the major loss channels are found to be non-unity luminescence quantum efficiency (QE) and electrolyte absorption. By using an ideal LDS layer (QE=100 %), a less absorbing electrolyte (Co-based), and antireflection coatings, approximately 20% better light harvesting is obtained....