Sharif Digital Repository

Rhamnolipids are the most common biosurfactants and P. aeruginosa strains are the most frequently studied microorganisms for the production of rhamnolipids. Eco-friendly advantages and promising applications of rhamnolipids in various industries are the major reasons for pursuing the economic production of these biosurfactants. This study shows that cultivation of P. aeruginosa MR01 in medium contained inexpensive soybean oil refinery wastes which exhibited similar levels and homologues of rhamnolipids. Mass spectrometry indicated that the Rha-C10-C10 and Rha-Rha-C10-C10 constitute the main rhamnolipids in different cultures of MR01 including one of oil carbon source analogues. Moreover,... 

Silica aerogel-multi wall carbon nanotube composites were synthesized successfully with a waterglass precursor and an ambient pressure drying method. Pure silica aerogels are so fragile that they cannot be used easily. Carbon nanotubes (MWCNT) were used as reinforcements to strengthen the mechanical properties of pure silica aerogels. Results show that inserting small amounts of MWCNT causes silica aerogels to monolith. By addition of MWCNT, monolith nanocomposites were produced with 800 m2/g surface area and a 140° contact angle. Results show that the silica aerogels and reinforced composites have an excellent adsorption property for the removal of organic pollutants from water. The average... 

A novel mesoporous silica-functionalized dual Brønsted acidic species has been introduced as an efficient catalyst for solvent-free esterification of fatty acids with ethanol. The structure of the catalyst has been characterized by FT-IR spectroscopy, thermal gravimetric analysis (TGA), TEM and N2 adsorption-desorption. TGA of catalyst 1 showed no weight loss before 200 °C, indicating a high degree of hydrophobicity of the surface of the mesoporous silica. TEM images and nitrogen adsorption-desorption showed no noticeable changes to the structure of the catalyst before and after acid treatment. pH metric analysis was performed for the catalyst to determine the loading of the acidic sites.... 

In this study, a novel nanocomposite thin film of Zn–SiO2 is considered. The thin film is a viable alternative for higher abrasion-resistant coatings. DLS technique revealed that the nanoparticle size is to be below 10 nm, and FE-SEM showed particle size to be below 17 nm in the obtained coating. The coating was found to be highly adhesive with an amorphous structure and hardness value above 1000HV. Corrosion resistance studies using linear polarization technique revealed that this unique nanocomposite has a lower corrosion rate than hot-dip galvanized steel at higher positive potentials. A conclusive mechanism for corrosion and erosion improvement has been proposed. Graphical Abstract:... 

2-Mercaptobenzimidazole, loaded on silica gel (MBI-SG) was used for preconcentration and speciation of iron(II) and iron(III) in water samples. The speciation is based upon selective retention of iron(III) on MBI-SG sorbent and quantitatively passing iron(II) ions. This type of sorbent was not only capable of separating theses two ions but also could concentrate them. The adsorbed iron(III) on MBI-SG was desorbed from the column by an SCN- solution and transferred to the detection device. The effluent, then, was treated with hydrogen peroxide to oxidize iron(II) into iron(III) and subsequently was pumped through the MBI-SG column. A home-made flow injection system was coupled with a UV-VIS... 

In this research, an attempt was made toward synthesizing a sol–gel–based silica aerogel and its subsequent coating on a copper wire by phase separation of polystyrene. Adaption of this new approach enabled us to coat the metallic wire with powder materials. The use of this method for coating, led to the formation of a porous and thick structure of silica aerogel. The coated wire was placed in a needle and used as the sorbent for in–tube solid phase microextraction of chlorobenzenes (CBs). The superhydrophobicity of sorbent on extraction efficiency was investigated by using different ratios of tetraethylorthosilicate/methyltrimethoxysilane. The surface coated with the prepared silica aerogel... 

Various alkyl, aryl, and heterocyclic Hantzsch 1,4-dihydropyridines were converted to the corresponding pyridines in excellent yields and short times using sodium nitrite in the presence of a catalytic amount of acidic silica gel at room temperature. © Springer-Verlag 2006  

Oxidative deprotection of silylethers, acetals and ketals, to their corresponding alcohols, aldehydes and ketones have been achieved using oxygen or air in the presence of cobalt and manganese salts of 4-aminobenzoic acid supported an silica gel as catalysts. Reactions are clean and catalysts can be recovered easily and reused repeatedly  

A mixture of cobalt(II) and manganese(II) salts of 4-aminobenzoic acid supported on silica gel catalyses the oxidation of thiols to disulfides in the presence of oxygen or air  

4-Aminoperoxybenzoic acid supported on silica gel in presence of oxygen or air was found to be a convenient and selective oxidant for the oxidation of benzylic methylene compounds to the corresponding ketones  

4-Amino-2-chloroperbenzoic acid supported on silica gel was found to be a versatile and efficient oxidant for the oxidation of aldehydes and ketones to the corresponding carboxylic acids and esters. Copyright © Taylor & Francis, Inc  

4-Aminopyridinium chlorochromate supported on silica gel was found to be an efficient reagent for the oxidation of primary and secondary alcohols to the corresponding carbonyl compounds. © Springer-Verlag 2004  

A new technique for preparation of an unbreakable solid-phase microextraction (SPME) fiber, using sol-gel technology is developed. Primarily, an ultrathin two-dimensional intermediate film was prepared by hydrolysis of 3-(trimethoxysilyl)-1-propanthiol self-assembled monolayer grafted onto gold, then a stationary phase by electrodeposition of 3-(trimethoxysilyl) propylmethacrylate as a precursor, tetramethyl orthosilicate and polyethylene glycol as a coating polymer was produced. The scanning electron microscopy images revealed that the new fiber exhibits a rather porous and homogenous surface. The thermal stability of the fabricated fiber was investigated by thermogravimetric analysis. The... 

Silica gel-confined ionic liquid (IL) is a class of heterogeneous catalysts with broad catalytic applications. Leaching of the IL from the surface of the support is the major drawback of these catalysts, which reduce the catalyst efficiency during the chemical reactions. To investigate the effect of the hydrogen bonding on the leaching phenomena, the interaction between the 1-ethyl-3-methylimidazolium-based IL with various anions (Cl-, Br-, HSO4 -, NO3 -, BF 4 -, and PF6 -) and the surface of the silica gel were studied using density functional theory. Hence, a hydroxylated cage-like cluster of silica gel, Si4O6(OH), was selected to mimic the surface. The values of ÎEinteraction show that... 

In the present study, we attempt to synthesize and characterize novel CMC-g-poly (acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid)/silica gel composite. Infrared spectroscopy and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy. The effect of reaction variables affecting on water absorbency of the composite and swelling behavior in various solvents, salt, and pH solutions was investigated. Maximum water absorbency of the optimized final product was found to be 4000 g/g in distilled water. The absorbency under load (AUL) of the hydrogel was also determined by... 

Nowadays, the world is facing a shortage of fresh water. Utilizing adsorbent materials to adsorb air moisture is a suitable method for producing freshwater, especially combining the adsorption desalination system with solar energy devices such as solar collectors. The low temperature of solar collectors has caused some water to remain in the adsorbents in the desorption process and has reduced the possibility of using these systems. In this research, for the first time, an evacuated tube collector (ETC) is used as an adsorbent bed so that the temperature of the desorption process reaches higher values and as a result, more fresh water is expected to produced. In this study, two adsorption... 

4-Aminoperoxybenzoic acid supported on silica gel was found to be a versatile and efficient oxidant for the oxidation of ketones to esters. Copyright © Taylor & Francis Group, LLC  

A task-specific Brønsted acidic ionic liquid (BAIL), 1-benzyl-3-methylimidazolium hydrogensulfate ([BnMIm]HSO4), was prepared and confined onto the high surface area silica gel. The catalyst has shown extraordinary activity in comparison of homogeneous ionic liquid (IL) system for Fischer esterification of fatty acid with ethanol. The ester derivatives were synthesized in high yields and catalyst was easily separated from the reaction mixture by simple filtration. The structure of the catalyst is theoretically modelized to investigate the unusual catalytic activity. Hence, a hydroxylated cage-like nano-cluster, H6Si8O12(OH)2, was selected to mimic the surface of silica gel. The interactions... 

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups  

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups. © 2005 Elsevier B.V. All rights reserved