Sharif Digital Repository

TiO2-based photocatalysts are seen as the most common agents for the photodegradation of bacteria. In this study, AgCl/TiO2, hydroxyapatite(Hp)/AgCl/TiO2, AgI/TiO2, and Hp/AgI/TiO2 were prepared by the deposition-precipitation method on P25 TiO2 nanoparticles and were characterized by XRD, SEM, FT-IR, EDX and BET methods. The prepared composites showed high efficiency for the inactivation of Escherichia coli (E. coli) bacteria under visible light and in dark media with different catalyst amounts of 12 and 24 mg, respectively. In less than 30 min, AgI/TiO2, prepared by the combination of cationic surfactant and PVPI2, disinfected 1 × 107 colony-forming units of E. coli completely. However,... 

An unusual heterobimetallic bis(triphenylphosphane)(NO2)AgI–CoIII(dimethyl-glyoximate)(NO2) coordination compound with both bridging and terminal –NO2 (nitro) coordination modes has been isolated and characterized from the reaction of [CoCl(DMGH)2(PPh3)] (DMGH2 is dimethylglyoxime or N,N′-di-hydroxybutane-2,3-diimine) with excess AgNO2. In the title compound, namely bis(dimethylglyoximato-1κ2O,O′)(μ-nitro-1κN:2κ2O,O′)(nitro-1κN)bis(triphenyl-phosphane-2κP)cobalt(III)silver(I), [AgCo(C4H7N2O2)2(NO2)2(C18H15P)2], one of the ambidentate –NO2 ligands, in a bridging mode, chelates the AgI atom in an isobidentate κ2O,O′-manner and its N atom is coordinated to the CoIII atom. The other –NO2 ligand... 

Microbial contamination poses a serious threat to human health. The evaluation of alternative systems and their reliability for the treatment of water is essential. In this work, a new method for the deposit of more silver nanoparticles (AgNPs) on the external surface of Fe3O4 nanoparticles is presented. Fe3O4 nanoparticles were synthesised by chemical co-precipitation and were modified in two stages using 3-mercaptopropyl trimethoxysilane and grafting allyl glycidyl ether and N, N-dimethylacrylamide. Then, AgNPs were loaded onto the modified Fe3O4 to be used for water disinfection. The resulting nanoparticles were characterised by transmission electron microscopy, X-ray powder diffraction,... 

Density functional theory (DFT) calculations have been performed to investigate the electronic structure and photocatalytic activity of a hybrid Ag3PO4(111)/g-C3N4 structure. Due to Ag(d) and O(p) states forming the upper part of the valence band and C(p), N(p), and Ag(s) the lower part of the conduction band, the band gap of the hybrid material is reduced from 2.75 eV for Ag3PO4(111) and 3.13 eV for monolayer of g-C3N4 to about 2.52 eV, enhancing the photocatalytic activity of the Ag3PO4(111) surface and g-C3N4 sheet in the visible region. We have also investigated possible reaction pathways for photocatalytic CO2 reduction on the Ag3PO4(111)/g-C3N4 nanocomposite to determine the most... 

Nanostructured Ag@SiO2-Penicillin was synthesized from high-purity Ag0 NPs with a mean particle size of about 10 nm produced by electromagnetic levitation gas condensation (ELGC) method. The silver and penicillin contents of the synthesized nano-antibiotic were about 34 wt% and 2.5 wt% respectively, as determined by ICP-OES and TGA analyses. The antibacterial properties and synergistic effects of nanostructured Ag@SiO2 and Ag@SiO2–Penicillin on killing the Methicillin-susceptible S. aureus (MSSA) and Methicillin-resistant S. aureus (MRSA) bacteria were also examined. The nanoparticles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Ag@SiO2-Penicillin... 

In this work, the combination of H2O2 and an active visible-light-driven photocatalyst (Ag-S/PEG/TiO2) was utilized under natural solar radiation for the degradation of 2-nitrophenol (2-NP), and interaction effects between the photocatalyst and hydrogen peroxide were analyzed. For this purpose, experiments were designed using the response surface methodology based on the central composite design. The resulting data was utilized to obtain a model for the prediction of response (the degradation efficiency) as a function of two independent factors (H2O2 concentration and the photocatalyst loading). The statistical analysis indicated that optimum values of each of the two independent factors... 

Development of a convenient and inexpensive method for identification and detection of nanoparticles (NPs) is of great interest. In this work, we have developed a novel and simple chemiluminescence based sensor array, with its sensing mechanism mimicking that of olfactory and gustatory systems for discriminating a set of NPs. The proposed method is based on the enhancement effect of NPs on luminol–oxidant CL intensity by their catalytic effect. Three kinds of oxidant including H2O2, AgNO3, and K3Fe(CN)6 were used as sensor elements and NPs exhibited diverse enhancing responses to different oxidant-luminol CL systems producing unique response patterns that were identified through heat map and... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

Cu-based metal organic framework/rGO was used as an effective cocatalyst to synthesis novel Ag3VO4/Cu-MOF/rGO nanocomposite. The resulting photocatalysts were characterized by different microscopic and spectroscopic methods. The photocatalytic degradation studies on acid blue 92 showed that Ag3VO4/Cu-MOF/rGO nanocomposite indicated significant improved activity compared with pure Ag3VO4 and Cu-MOF/rGO. The improved photocatalytic activity of nanocomposite was attributed to the increased surface area and effective charge carrier separation and transport in the nanocomposite. © 2019 Elsevier Ltd  

The present study aims to investigate the impact of nanoparticle migration due to Brownian motion and thermophoresis on Ag-MgO/Water hybrid nanofluid natural convection. An enclosure with sinusoidal wavy walls is considered for this investigation; right and cold walls of this enclosure are in constant temperature while the upper and bottom walls are insulated. This simulation follows Buongiorno's mathematical model; Brownian and thermophoresis diffusion of Ag occurs in MgO-Water nanofluid while the diffusion of MgO happens in Ag-water nanofluid. The result indicates that Nu number increments up to 11% by increasing thermophoresis diffusion for both nanoparticles. Also, increasing Brownian... 

Abstract: The loading of co-catalyst is an efficient way to increase the activity of synthesized carbon-based photocatalysts in the energy and environmental applications. Herein, Co and Ni decorated on g-C3N4 was synthesized as a visible light active photocatalyst and characterized with XRD, FT-IR, BET, DRS, TGA, FE-SEM, EDX, and EIS techniques. From the characterization results, it was demonstrated that cobalt and nickel which were present in the structure of the nanocatalyst, were in the metallic form. The decoration of Ni and Co reduced bandgap energy of g-C3N4 and made the synthesized nanocomposite active under visible light. The operating condition of O2 photocatalytic generation was... 

This study devoted to developing an efficient adsorbent with the excellent adsorption performance of heavy metals and bacteria capturing. Polyresorcinol@CoFe2O4 was synthesized by one-step hydrothermal reaction followed with doping MnS nanoparticles. The composite was characterized with SEM,TEM, BET, EDX, XRD, zeta potential measurement and Raman spectroscopy. Optimization of effective parameters on heavy metal adsorption, i.e., pH, contact time and adsorbent dosage, was performed with response surface methodology using Box–Behnken design. The sorbent showed good performance for Pb(II), Ag(I) and Cr(VI) removal with convenient magnetic separation operation with an adsorption capacity of... 

In this research, we investigate the effect of alkali metal cations including Li, Na and Cs in hydrothermal solution on the morphology, stability, and photoactivity of nanostructured TiO2 nanoflakes as a photoanode. The TiO2 nanoflakes are formed through hydrothermal treatment of Ti foil in 1.0 M LiOH, NaOH or CsOH at 100 °C for 3 h. By subsequent thermal reduction of the structure in an optimized Ar/H2 environment, conductive TiO2 nanoflakes were formed. The reduction treatment remarkably improves the photocurrent density of the TiO2 nanoflakes and has the highest impact on the sample treated in the NaOH alkali solution. For the nanoflakes produced in NaOH alkali solution, the bandgap is... 

In this study, we investigate the use of catalytic copper-silver-palladium substrates for the growth of multiwalled carbon nanotubes via the thermal chemical vapor deposition. These layers are comprised of nanocrystals of Cu2O, CuO, Ag, Pd, Cu, and PdO and were grown using a DC magnetron sputtering method. Scanning electron microscopy characterizations confirmed the significant growth of carbon nanotubes on the catalytic layer. A comparison of the growth of nanotubes indicated that the thickness of the catalytic layers has a significant impact on the quality and the diameter of the carbon nanotubes. Two major peaks were seen in the Raman spectrum. The formation of graphite multiwalled... 

TiO2 deposited on a membrane of Ag fibers was prepared as a photoelectrochemical cell electrode. Ag fibers were made by reduction of Ag complexes on cellulose fibers, followed by burning out the template. TiO 2 photocatalyst layers were grown on the fibers by electrophoretic deposition of TiO2 nanoparticles. Ag fibers could be uniformly deposited. Photocatalytic tests by dye decomposition and electrochemical impedance spectroscopy (EIS) under UV illumination demonstrate that Ag fibers act as a good substrate that provides both high surface area and good separation of photogenerated electron-hole pairs and causes the enhancement of photocatalytic activity in comparison with a thin film of... 

Apatite-coated Ag/AgBr/TiO2 was prepared by deposition of Ag as novel metal to generate electron-hole pairs by extending the excitation wavelength to the visible-light region, AgBr, and hydroxy apatite as photosensitive material and adsorption bioceramic, respectively. The energy dispersive X-ray spectrometry clearly showed the presence of Ti, Ag, Ca, and P elements on the surface of catalyst. The bactericidal experiments in dark media indicated that only the novel catalyst shows inhibiting growth of bacteria in this case. A transmission electron microscopy image illustrated that catalyst nanoparticles adhere to the outer membrane of the cell and act as an inhibitor to the nourishment of... 

In this research, Ag-Al2O3 nanostructures have been prepared via combustion synthesis and ammonium acetate and urea have been applied as fuels. The prepared Ag-Al2O3 nanostructures were characterized by DTA, XRD, SEM, TEM, and BET spectroscopy. The effect of different ratios of silver to alumina and fuel percentage on morphology and particle size of prepared products were investigated. The results showed that using ammonium acetate fuel led to the production of Ag-γ-Al2O3 nanocompounds, while using urea produced Ag-α-Al2O3. Also, the photocatalytic activity of Ag-Al2O3 nanostructures for Congo red degradation was evaluated by UV-Vis diffuse reflectance spectroscopy. The photocatalytic... 

AgNPs@Chitosan and Co3O4-NPs@Chitosan were fabricated with Salvia hispanica. Results showed MZI values of 5 and 30 mm for Co3O4-NPs- and AgNPs@Chitosan against S. aureus, and 15 and 21 mm for Co3O4-NPs- and AgNPs@Chitosan against E. coli (24 h, 20 μg/mL), respectively. MTT assays showed up to 80% and 90%, 71% and 75%, and 91% and 94% mammalian cell viability for the green synthesized, chemically synthesized AgNPs and green synthesized AgNPs@Chitosan for HEK-293 and PC12 cells, respectively, and 70% and 71%, 59% and 62%, and 88% and 73% for the related Co3O4-NPs (24 h, 20 μg/mL). The photocatalytic activities showed dye degradation after 135 and 105 min for AgNPs@Chitosan and... 

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy...